loading
DS/EN ISO 13297 - Small craft – Electrical systems – Alternating current installations (ISO 13297:2014)
October 9, 2018 - DS

ISO 13297:2014 specifies the requirements for the design, construction and installation of low-voltage alternating current electrical systems which operate at nominal voltages of less than 250 V single phase on small craft of hull length up to 24 m. Additional information to be...

DS/EN ISO 12718 - Non-destructive testing – Eddy current testing – Vocabulary (ISO 12718:2019)
September 17, 2019 - DS

This document defines terms used in eddy current testing.

DSF/PREN ISO 13297 - Small craft – Electrical systems – Alternating current installations (ISO/DIS 13297:2018)
DS

This International Standard specifies the requirements for the design, construction and installation of the types of d.c. and a.c. electrical systems described below, either individually or in combination. a) low-voltage alternating current electrical systems which operate at nominal...

DSF/FPREN ISO 13297 - Small craft – Electrical systems – Alternating and direct current installations (ISO/FDIS 13297:2020)
DS

This International Standard specifies the requirements for the design, construction and installation of the types of d.c. and a.c. electrical systems described below, either individually or in combination. a) low-voltage alternating current electrical systems which operate at nominal...

DIN EN ISO 13297 - Small craft - Electrical systems - Alternating current installations (ISO 13297:2014); English version EN ISO 13297:2018
February 1, 2019 - DIN

This International Standard specifies the requirements for the design, construction and installation of low-voltage alternating current electrical systems which operate at nominal voltages of less than 250 V single phase on small craft of hull length up to 24 m. Additional information to be...

AENOR UNE-EN ISO 12718 E - Non-destructive testing - Eddy current testing - Vocabulary (ISO 12718:2008)
December 2, 2009 - AENOR
A description is not available for this item.
DS/EN ISO 8849 - Small craft – Electrically operated direct-current bilge pumps (ISO 8849:2003)
October 3, 2018 - DS

This International Standard specifies requirements for electrically operated direct-current bilge pumps intended for use in removing bilge water from small craft with a hull length up to 24 m. It applies to electrically operated bilge pumps rated for less than 50 V direct current (d.c...

DSF/PREN ISO 12718 - Non-destructive testing – Eddy current testing – Vocabulary (ISO/DIS 12718:2018)
DS

This International Standard defines terms used in eddy current testing. NOTE - In addition to terms used in English and French, two of the three official ISO languages (English, French and Russian), this document gives the equivalent terms in German; these are published under the...

DSF/FPREN ISO 12718 - Non-destructive testing – Eddy current testing – Vocabulary (ISO/FDIS 12718:2019)
DS

This International Standard defines terms used in eddy current testing. NOTE - In addition to terms used in English and French, two of the three official ISO languages (English, French and Russian), this document gives the equivalent terms in German; these are published under the...

DS/EN ISO 2360 - Non-conductive coatings on non-magnetic electrically conductive base metals – Measurement of coating thickness – Amplitude-sensitive eddy-current method (ISO 2360:2017)
September 4, 2017 - DS

ISO 2360:2017 specifies a method for non-destructive measurements of the thickness of non-conductive coatings on non-magnetic electrically conductive base metals, using amplitude-sensitive eddy-current instruments. In ISO 2360:2017, the term "coating" is used for materials such...

AFNOR NF L22-205 - Bolt, hexagonal head, with cotter pin hole, current use. ISO thread.
September 1, 1984 - AFNOR
A description is not available for this item.
DIN EN ISO 2360 - Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method (ISO 2360:2017)
December 1, 2017 - DIN

This document specifies a method for non-destructive measurements of the thickness of non-conductive coatings on non-magnetic electrically conductive base metals, using amplitude-sensitive eddy-current instruments. In this document, the term "coating" is used for materials such as, for...

DSF/FPREN ISO 2360 - Non-conductive coatings on non-magnetic electrically conductive base metals – Measurement of coating thickness – Amplitude-sensitive eddy-current method (ISO/FDIS 2360:2017)
DS

This International Standard specifies a method for non-destructive measurements of the thickness of nonconductive coatings on non-magnetic, electrically conductive (generally metallic) base materials, using amplitude-sensitive eddy current instruments. In this standard the term "coating" is...

DS/EN ISO 15549 - Non-destructive testing – Eddy current testing – General principles (ISO 15549:2019)
May 21, 2019 - DS

This document defines the general principles to be applied to non-destructive eddy current examination of products and materials in order to ensure defined and repeatable performance. It includes guidelines for the preparation of application documents which describe the specific requirements...

DS/EN ISO 21968 - Non-magnetic metallic coatings on metallic and non-metallic basis materials – Measurement of coating thickness – Phase-sensitive eddy-current method (ISO 21968:2019)
October 21, 2019 - DS

This document specifies a method for using phase-sensitive eddy-current instruments for non-destructive measurements of the thickness of non-magnetic metallic coatings on metallic and non-metallic basis materials such as: a) zinc, cadmium, copper, tin or chromium on steel; b) copper or...

DSF/FPREN ISO 15549 - Non-destructive testing – Eddy current testing – General principles (ISO/FDIS 15549:2019)
DS

This International Standard defines the general principles to be applied to non-destructive eddy current examination of products and materials in order to ensure defined and repeatable performance. It includes guidelines for the preparation of application documents which describe the...

DSF/FPREN ISO 21968 - Non-magnetic metallic coatings on metallic and non-metallic basis materials – Measurement of coating thickness – Phase-sensitive eddy-current method (ISO/FDIS 21968:2019)
DS

This document specifies a method for using phase sensitive eddy current instruments for nondestructive measurements of the thickness of non-magnetic metallic coatings on metallic and nonmetallic basis materials such as: 1. zinc, cadmium, copper, tin or chromium on steel; 2. Copper or silver...

DSF/PREN ISO 21968 - Non-magnetic metallic coatings on metallic and non-metallic basis materials – Measurement of coating thickness – Phase-sensitive eddy-current method (ISO/DIS 21968:2018)
DS

This document specifies a method for using phase sensitive eddy current instruments for nondestructive measurements of the thickness of non-magnetic metallic coatings on metallic and nonmetallic basis materials such as: 1. zinc, cadmium, copper, tin or chromium on steel; 2. Copper or silver...

Advertisement