loading
ASTM E2912-26 - Standard Test Method for Fire Test of Non-Mechanical Fire Dampers Used in Vented Construction
May 1, 2026 - ASTM International

1.1 This fire-test-response standard assesses the ability of non-mechanical fire dampers used in vented construction in its open state to limit passage of hot gases, radiation, and flames during a prescribed fire test exposure. The fire exposure condition in this test method is sudden direct...

ASTM E477-26 - Standard Test Method for Laboratory Measurements of Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
February 1, 2026 - ASTM International

1.1 This test method covers the laboratory testing of some of the acoustical properties of sound attenuating devices including duct liner materials, integral ducts, and in-duct absorptive straight and elbow silencers used in the ventilation systems of buildings. Procedures are described for the...

ASTM F3256-25 - Standard Guide for Recording, Reporting, and Analyzing Near-Miss Events to Improve Safety Across the Maritime Industry
October 1, 2025 - ASTM International

4.1 The objective of this near-miss recording and reporting guide is to support companies, organizations, workforce, and safety professionals in the collection, recording, reporting, analysis, and benchmarking of near-miss safety related events that can be leveraged for identifying and reducing...

ASTM E3456-25 - Standard Practice for On-Site Identification of Firestop Systems and Judgments
June 1, 2025 - ASTM International

1.1 This practice covers the identification requirements for installed firestop systems (FS), fire-resistive joint systems (FRJS), perimeter fire containment systems (PFCS), and continuity head-of-wall joint systems (CHWJS). These systems are installed on, in, or between fire resistance rated wall...

ASTM D395-18(2025) - Standard Test Methods for Rubber Property—Compression Set
February 1, 2025 - ASTM International

1.1 These test methods cover the testing of rubber intended for use in applications in which the rubber will be subjected to compressive stresses in air or liquid media. They are applicable particularly to the rubber used in machinery mountings, vibration dampers, and seals. Three test...

ASTM D5992-96(2024) - Standard Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods
May 1, 2024 - ASTM International

5.1 This guide is intended to describe various methods for determining the dynamic properties of vulcanized rubber materials, and by extension, products utilizing such materials in applications such as springs, dampers, and flexible load-carrying devices, flexible power transmission...

ASTM E2816-24 - Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems
October 1, 2024 - ASTM International

Note 1: Use of the standard designation ISO 6944 refers to both ISO 6944:1985 and ISO 6944-1:2008. 1.1 These test methods evaluate the fire-resistive metallic HVAC duct system's fire resistance and fire-engulfment with horizontal and vertical through-penetration firestops. Note 2: The intent of...

UL 710 - Exhaust Hoods for Commercial Cooking Equipment
April 29, 2024 - ULSE

1.1 These requirements cover Type I commercial kitchen exhaust hoods intended for placement over commercial cooking equipment. Exhaust hoods with and without exhaust dampers are covered by these requirements. 1.2 Exhaust hoods with and without exhaust fire actuated fire dampers are...

ASTM E1318-09(2024) - Standard Specification for Highway Weigh-In-Motion (WIM) Systems with User Requirements and Test Methods
May 1, 2024 - ASTM International

1.1 Weigh-In-Motion-This specification describes Weigh-In-Motion (WIM), the process of measuring the dynamic tire forces of a moving vehicle and estimating the corresponding tire loads of the static vehicle. Gross vehicle weight of a highway vehicle is due only to the local force of gravity acting...

UL 864 - Control Units and Accessories for Fire Alarm Systems
October 9, 2023 - ULSE

1.1 This Standard covers requirements as related to the following: a) Discrete electrical control units and accessories for fire alarm systems including smoke control, releasing, Building System Information Unit (BSIU), and emergency communication systems; b) Electrically- and...

UL 268 - Smoke Detectors for Fire Alarm Systems
June 2, 2023 - ULSE

1.1 This Standard sets forth requirements for smoke detectors and accessories, including mechanical guards to be employed in ordinary indoor locations in accordance with the following: a) In Canada only: 1) Standard for the Installation of Fire Alarm Systems, ULC-S524; 2) National Building Code of...

ASTM E1186-22 - Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems
October 1, 2022 - ASTM International

5.1 Air infiltration into the conditioned space of a building accounts for a significant portion of the thermal space condition load. Air infiltration can affect occupant comfort by producing drafts, cause indoor air quality problems by carrying outdoor pollutants into occupied building space and,...

ASTM E1827-22 - Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door
October 1, 2022 - ASTM International

5.1 Airtightness-Building airtightness is one factor that affects building air change rates under normal conditions of weather and building operation. These air change rates account for a significant portion of the space-conditioning load and affect occupant comfort, indoor air quality, and...

ASTM D3903-15(2022) - Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems
October 1, 2022 - ASTM International

This specification establishes the general requirements for two types, two classes, and seven grades of rubber seals used in solar energy systems employing air-heat transport, such as duct and damper seals. Particular applications may necessitate other requirements that would take precedence...

GMW6725 - Preliminary Sprayable Damper - Generic Qualification
March 1, 2020 - GMW

This specification details the requirements of waterborne, sprayable sound damper (Liquid Applied Sound Damper (LASD)). The purpose of this material is to reduce vehicle metal noise vibrations excited by engine, tires, transmission and stone impingement. The material is applied in the...

GMW14898 - Bending Test for Suspension Damper Piston Rods
March 1, 2021 - GMW
A description is not available for this item.
9986289 - Waterborne, Low Bake, Sprayable Damper, High Performance
September 1, 2020 - GMNA

This specification details the requirements of a waterborne, low bake, sprayable sound damper material with high acoustic performance. The material is applied in the paint shop after Electrocoat (E-Coat) bake, before primer surfacer. This material is intended to improve the acoustic sound...

9986288 - Waterborne, High Bake, Sprayable Damper, High Performance
September 1, 2020 - GMNA

This specification details the requirements of a waterborne, high bake, sprayable sound damper material with high acoustic performance. The material is applied in the paint shop after Electrocoat (E-Coat) bake, before primer surfacer. This material is intended to improve the acoustic sound...

UL 33 - Heat Responsive Links for Fire-Protection Service
June 21, 2021 - ULSE

1.1 These requirements cover heat responsive links used for fire-protection service. These links consist of devices intended for installation under load conditions such as for use with automatic fire suppression systems; or automatic closure devices for doors, windows, dampers or smoke...

ULC 33 - Heat Responsive Links for Fire-Protection Service
June 21, 2021 - ULSE

1.1 These requirements cover heat responsive links used for fire-protection service. These links consist of devices intended for installation under load conditions such as for use with automatic fire suppression systems; or automatic closure devices for doors, windows, dampers or smoke...

Advertisement