loading
ASTM F668-25 - Standard Specification for Polyvinyl Chloride (PVC), Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric
November 15, 2025 - ASTM International

This specification covers polyvinyl chloride and other conforming organic polymer-coated steel chain-link fabric, coated before weaving. Fabric produced from three classes of wire coatings are covered as follows: Class I consists of polymer coatings extruded over zinc-coated, aluminum-coated, or...

ASTM F3665-25 - Standard Practice for Classification, Design, Manufacture, Construction, Maintenance, and Operation of Controlled Surf Basins
September 1, 2025 - ASTM International

1.1 This practice applies to the classification, design, manufacture, construction, auditing, major modification, and operation of surf basins. 1.1.1 Surf basins subject to this practice incorporate wave generating equipment and a constructed body of water to produce moving waves that (1) shoal and...

ASTM C856/C856M-25 - Standard Practice for Petrographic Examination of Hardened Concrete
February 1, 2025 - ASTM International

This practice outlines the standard procedures for performing petrographic examination of hardened concrete samples. The samples examined may be taken from concrete constructions, that is, all sorts of objects, units, or structures that have been built of hydraulic cement concrete. They may also be...

ASTM C847-18(2024) - Standard Specification for Metal Lath
December 1, 2024 - ASTM International

This specification covers sheet lath, expanded metal lath, diamond mesh, flat and self-furring, and rib metal lath, all with or without backing and designed to be used as a base for gypsum or Portland cement plaster. Metal lath shall be fabricated from cold-rolled carbon steel sheet of...

ASTM G171-24 - Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus
June 1, 2024 - ASTM International

5.1 This test method is intended to measure the resistance of solid surfaces to permanent deformation under the action of a single point (stylus tip). It is a companion method to quasi-static hardness tests in which a stylus is pressed into a surface under a certain normal load and the resultant...

ASTM C1327-15(2024) - Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics
September 1, 2024 - ASTM International

1.1 This test method covers the determination of the Vickers indentation hardness of advanced ceramics. In this test, a pointed, square-based, pyramidal diamond indenter of prescribed shape is pressed into the surface of a ceramic with a predetermined force to produce a relatively small,...

ASTM D6914/D6914M-16(2024) - Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices
March 15, 2024 - ASTM International

5.1 Sonic drilling is a rapid, primarily dry drilling method (see 5.2), used both in geotechnical applications to avoid hydraulic fracturing, and in environmental site exploration. Geotechnical applications include exploration for tunnels, underground excavations, and installation of...

ASTM E2224-23a - Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
May 1, 2023 - ASTM International

5.1 This guide is designed to assist an examiner in the selection of appropriate sample preparation methods for the analysis, comparison, and identification of fibers using IR spectroscopy. IR spectroscopy can provide additional compositional information than is obtained using polarized light...

ASTM E2224-23ae1 - Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
May 1, 2023 - ASTM International

5.1 This guide is designed to assist an examiner in the selection of appropriate sample preparation methods for the analysis, comparison, and identification of fibers using IR spectroscopy. IR spectroscopy can provide additional compositional information than is obtained using polarized light...

ASTM E2224-23 - Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
April 1, 2023 - ASTM International

5.1 This guide is designed to assist an examiner in the selection of appropriate sample preparation methods for the analysis, comparison, and identification of fibers using IR spectroscopy. IR spectroscopy can provide additional compositional information than is obtained using polarized light...

ASTM B387/B387M-23 - Standard Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire
January 1, 2023 - ASTM International

This specification covers unalloyed molybdenum and molybdenum alloy bar, rod, and wire. The following materials are covered: molybdenum 360, molybdenum 361, molybdenum 363, molybdenum 364, molybdenum 365, and molybdenum 366. These materials shall be manufactured with conventional extrusion,...

ASTM A491-11(2022) - Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric
November 1, 2022 - ASTM International

This specification covers the basic physical requirements for steel chain-link fence fabric that are aluminum-coated before weaving. Fabrics conforming to this specification shall meet specified requirements for weave form and typical diamond count, size of mesh, size of wire, height of...

ASTM C1326-13(2023) - Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics
January 1, 2023 - ASTM International

1.1 This test method covers the determination of the Knoop indentation hardness of advanced ceramics. In this test, a pointed, rhombic-based, pyramidal diamond indenter of prescribed shape is pressed into the surface of a ceramic with a predetermined force to produce a relatively small,...

ASTM A392-11a(2022) - Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
November 1, 2022 - ASTM International

This specification covers zinc-coated (galvanized) steel chain-link fence fabric, zinc coated either before or after weaving. The wire shall be woven throughout in the form of approximately uniform square mesh, having parallel sides and horizontal and vertical diagonals of approximately uniform...

ASTM F668-17(2022) - Standard Specification for Polyvinyl Chloride (PVC), Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric
November 1, 2022 - ASTM International

This specification covers polyvinyl chloride and other conforming organic polymer-coated steel chain-link fabric, coated before weaving. Fabric produced from three classes of wire coatings are covered as follows: Class I consists of polymer coatings extruded over zinc-coated, aluminum-coated, or...

ASTM D7625-22 - Standard Test Method for Laboratory Determination of Abrasiveness of Rock Using the CERCHAR Abrasiveness Index Method
October 1, 2022 - ASTM International

5.1 The CERCHAR test and associated CAI were developed at a time of more demand for application of mechanical excavation machines at the Laboratoire du Center d' Études et Recherches des Charbonnages de France (CERCHAR) (5). CAI is used to assess the abrasiveness of rock for mechanical excavation....

ASTM C1624-22 - Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing
March 15, 2022 - ASTM International

1.1 This test method covers the determination of the practical adhesion strength and mechanical failure modes of hard (Vickers Hardness HV = 5 GPa or higher), thin (

ASTM E2224-22 - Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
May 1, 2022 - ASTM International

5.1 This guide is designed to assist an examiner in the selection of appropriate sample preparation methods for the analysis, comparison, and identification of fibers using IR spectroscopy. IR spectroscopy can provide additional compositional information than is obtained using polarized light...

ASTM B294-22 - Standard Test Method for Hardness Testing of Cemented Carbides
March 1, 2022 - ASTM International

1.1 This test method covers the hardness testing of cemented carbides by use of a Rockwell hardness tester performing tests in the Rockwell HRA scale (regular scale, diamond indenter, 10 kgf (98.07 N) preliminary test force, and 60 kgf (588.4 N) total test force) in the range of Rockwell 80...

ASTM C469/C469M-22 - Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression
April 1, 2022 - ASTM International

1.1 This test method covers determination of (1) chord modulus of elasticity (Young's) and (2) Poisson's ratio of molded concrete cylinders and diamond-drilled concrete cores when under longitudinal compressive stress. Chord modulus of elasticity and Poisson's ratio are defined in...

Advertisement