loading
TIA-644 - Electrical Characteristics of Low Voltage Differential Signaling (LVDS) Interface Circuits
February 1, 2001 - TIA

This Standard specifies the electrical characteristics of low voltage differential signaling interface circuits, normally implemented in integrated circuit technology, that may be employed when specified for the interchange of binary signals between: Data Terminal Equipment...

ASTM E2069-25 - Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters on Cooling
December 1, 2025 - ASTM International

5.1 This test method is useful in calibrating the temperature signal of a DSC for cooling experiments such as the determination of crystallization temperatures in Test Method D3418 and Test Method E794. 5.2 This test method may be used for research, development, analytical, specification...

ASTM E307-72(2025) - Standard Test Method for Normal Spectral Emittance at Elevated Temperatures
December 1, 2025 - ASTM International

5.1 The significant features are typified by a discussion of the limitations of the technique. With the description and arrangement given in the following portions of this test method, the instrument will record directly the normal spectral emittance of a specimen. However, the following conditions...

ASTM E423-71(2025) - Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
December 1, 2025 - ASTM International

5.1 The significant features are typified by a discussion of the limitations of the technique. With the description and arrangement given in the following portions of this test method, the instrument will record directly the normal spectral emittance of a specimen. However, the following conditions...

ASTM E499/E499M-11(2025) - Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode
July 1, 2025 - ASTM International

1.1 This practice covers procedures for testing and locating the sources of gas leaking at the rate of 1?×?10 -7 Pa m3/s (1?×?10-8 Std cm3/s)3 or greater. The test may be conducted on any device or component across which a pressure differential of helium or other suitable tracer gas may be...

ASTM E1606-25 - Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Aluminum Redraw Rod for Electrical Purposes
June 1, 2025 - ASTM International

5.1 Eddy current instrumentation provides timely and useful information regarding the acceptability of copper and aluminum rod for quality control purposes, as well as providing for early warning that unacceptable rod is being produced. Eddy current testing is a nondestructive method of locating...

TIA-899 - Electrical Characteristics of Multipoint-Low-Voltage Differential Signaling (M-LVDS) Interface Circuits for Multipoint Data Interchange
March 1, 2002 - TIA

This Standard specifies the electrical characteristics of low-voltage differential signaling interface circuits that may be employed when specified for the interchange of binary signals between equipment sharing a common data interchange circuit. The electrical characteristics...

ASTM E2683-25 - Standard Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages
April 1, 2025 - ASTM International

5.1 The purpose of this test method is to measure the net heat flux to or from a surface location. For measurement of the radiant energy component the emissivity or absorptivity of the surface coating of the gage is required. When measuring the convective energy component, the potential physical...

ASTM E571-24 - Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products
June 1, 2024 - ASTM International

5.1 Eddy-current testing is a nondestructive method of locating discontinuities in metallic materials. Signals can be produced by discontinuities originating on either the external or internal surfaces of the tube or by discontinuities totally contained within the wall. Since the density of...

ASTM E309-24 - Standard Practice for Eddy Current Examination of Steel Tubular Products
July 1, 2024 - ASTM International

5.1 The purpose of this practice is to outline a procedure for the detection and location of discontinuities such as pits, voids, inclusions, cracks, or abrupt dimensional variations in ferromagnetic tubing using the electromagnetic (eddy current) method. Furthermore, the relative severity of a...

ASTM F2362-03(2024) - Standard Specification for Temperature Monitoring Equipment
May 1, 2024 - ASTM International

1.1 This specification covers the requirements for equipment intended to provide control input and monitoring of temperatures in general applications. Equipment described in this specification includes temperature indicators, signal conditioners and power supplies, and temperature sensors...

ASTM F2537-23 - Standard Practice for Calibration of Linear Displacement Sensor Systems Used to Measure Micromotion
September 1, 2023 - ASTM International

1.1 This practice covers the procedures for calibration of linear displacement sensors and their corresponding power supply, signal conditioner, and data acquisition systems (linear displacement sensor systems) for use in measuring micromotion. It covers any sensor used to measure...

ASTM F2070-00(2022) - Standard Specification for Transducers, Pressure and Differential, Pressure, Electrical and Fiber-Optic
October 1, 2022 - ASTM International

This specification covers the requirements for pressure and differential pressure transducers for general applications. Pressure transducers typically consist of a sensing element that is in contact with the process medium and a transduction element that modifies the signal from the...

ASTM E1256-17(2022) - Standard Test Methods for Radiation Thermometers (Single Waveband Type)
May 1, 2022 - ASTM International

4.1 The purpose of these test methods is to establish consensus test methods by which both manufacturers and end users may perform tests to establish the validity of the readings of their radiation thermometers. The test results can also serve as standard performance criteria for instrument...

UL 60730-2-5 - Automatic Electrical Controls - Part 2-5: Particular Requirements for Automatic Electrical Burner Control Systems
July 29, 2022 - ULSE

Replacement: This part of IEC 60730 applies to automatic electrical burner control systems for the automatic control of burners for oil, gas, coal or other combustibles intended to be used • for household and similar use, • in shops, offices, hospitals, farms and commercial and industrial...

ASTM D6176-97(2022) - Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors
March 1, 2022 - ASTM International

4.1 Applications-Ambient atmospheric temperature measurements can be made using resistance thermometers for many purposes. The application determines the most appropriate type of resistance thermometer and data recording method to be used. Examples of three typical meteorological applications for...

Methods of Mathematical Modelling: Fractional Differential Equations
October 3, 2019 - CRC

This book features original research articles on the topic of mathematical modelling and fractional differential equations. The contributions, written by leading researchers in the field, consist of chapters on classical and modern dynamical systems modelled by fractional differential...

TIA TSB-88.2 - Wireless Communications Systems Performance in Noise and Interference- Limited Situations Part 2: Propagation and Noise
April 1, 2021 - TIA

The TSB-88 Series The TSB-88 series of bulletins gives guidance on the following areas: • Establishment of standardized methodology for modeling and simulating either narrowband/bandwidth efficient technologies or broadband technologies; • Establishment of a standardized methodology for empirically...

Differential Equations: A Modern Approach with Wavelets
January 21, 2020 - CRC

This new book from one of the most published authors in all of mathematics is an attempt to offer a new, more modern take on the Differential Equations course. The world is changing. Because of the theory of wavelets, Fourier analysis is ever more important and central. And applications are...

Advertisement