1.1 This method covers a procedure for determination of the steady-state rate of transmission of carbon dioxide gas through plastics in the form of film, sheeting, laminates, coextrusions, or plastic-coated papers or fabrics. It provides for the determination of (1) carbon dioxide gas...
1.1 This method covers a procedure for determination of the steady-state rate of transmission of carbon dioxide gas through plastics in the form of film, sheeting, laminates, coextrusions, or plastic-coated papers or fabrics. It provides for the determination of (1) carbon dioxide gas...
The measurement of carbon dioxide in natural gas is important, because of the gas quality specifications, the corrosive nature of carbon dioxide on pipeline materials, and the affects of carbon dioxide on utilization equipment. This test method provides inexpensive field...
1.1 This test method covers a rapid and simple field determination of carbon dioxide in natural gas pipelines. Available detector tubes provide a total measuring range of 100 ppm (parts per million) up to 60% by volume although the majority of applications will be on the lower end of...
This standard describes carbon dioxide (CO2) for use in recarbonation and pH adjustment in the treatment of potable water, wastewater, and reclaimed water. Purpose The purpose of this standard is to provide minimum requirements for carbon dioxide, including physical, chemical,...
1.1 This guide defines purity standards for carbon dioxide to ensure the suitability of liquefied carbon dioxide gas for use in SFE and SFC applications (see Guide E1449 for definitions of terms). This guide defines quantitation, labeling, and statistical standards for impurities in...
1.1 This classification covers the compounding material known as titanium dioxide. It is generally used in rubber compounds to impart whiteness to selected products. Typical chemical and physical properties are included. 1.2 This standard does not purport to address all of the safety...
This standard describes sulfur dioxide, a compressed, nonflammable liquefied gas, for use in the treatment of potable water, wastewater, or reclaimed water to remove excess residual chlorine. Purpose The purpose of this standard is to provide the minimum requirements for sulfur...
5.1 The measurement of carbon dioxide in natural gas is important, because of gas quality specifications, the corrosive nature of carbon dioxide on pipeline materials, and the affects of carbon dioxide on utilization equipment. 5.2 This test method provides inexpensive field...
1.1 This practice covers the minimum requirements for radiographic examination of metallic and nonmetallic materials using digital detector arrays (DDAs). 1.2 The stated requirements of this specification are based on the use of an X-ray generating source. Additionally, some of the tests and...
5.1 Uranium dioxide is used as a nuclear-reactor fuel. Gadolinium oxide is used as an additive to uranium dioxide. In order to be suitable for this purpose, these materials must meet certain criteria for impurity content. This test method is designed to determine whether the hydrogen...
1.1 This test method2 covers the manual determination of nitrogen dioxide (NO2) in the atmosphere in the range from 4?μg/m3 to 10 000 μg/m3 (0.002 ppm(v) to 5 ppm(v)) when sampling is conducted in fritted-tip bubblers. 1.2 For concentrations of NO2 in excess of 10 mg/m3 (5?ppm(v)), as occur...
1. SCOPE The material defined by this Standard is fine grade of titanium dioxide.
This test method covers a rapid and simple field determination of carbon dioxide in natural gas pipelines. Available detector tubes provide a total measuring range of 100 ppm (parts per million) up to 60 % by volume, although the majority of applications will be on the lower end of...
1. SCOPE: The material defined by this Standard is carbon dioxide in either the solid (dry ice) or liquid form.
1. SCOPE: The material defined by this Standard is carbon dioxide in either the solid (dry ice) or liquid form.
1.1 This standard is a user guide, which is intended to serve as a tutorial for selection and use of various digital detector array systems nominally composed of the detector array and an imaging system to perform digital radiography. This guide also serves as an in-detail reference...
1.1 This guide defines purity standards for carbon dioxide to ensure the suitability of liquefied carbon dioxide gas for use in SFE and SFC applications (see Guide E 1449 for definitions of terms). This guide defines quantitation, labeling, and statistical standards for impurities in...
This specification and its supplementary detail specifications cover silicon dioxide in the form of a white, amorphous powder.
Narrow Your Results