loading
IADC DRILLING MANUAL - IADC DRILLING MANUAL
IADC
A description is not available for this item.
IADC DRILLING FLUIDS PROC - DRILLING FLUIDS PROCESSING HANDBOOK
IADC
A description is not available for this item.
IADC DRILLING MANUAL CD - IADC DRILLING MANUAL *** CD ROM ***
IADC
A description is not available for this item.
JIS M 0103 - Glossary of terms for drilling equipments and tools
November 20, 2020 - JSA
A description is not available for this item.
API STD 7B - SPECIFICATION for ROTARY DRILLING EQUIPMENT
August 1, 1947 - API

Foreword This supplement covers changes for API Std 7B (Tenth Edition): Specification for Rotary Drilling Equipment as adopted by the Committee on the Standardization of Rotary Drilling Equipment at the 1947 and 1948 meetings and previously published in Sup. 2; also...

ASTM F1962-25a - Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings
August 1, 2025 - ASTM International

1.1 This guide describes the design, selection considerations, and installation procedures for the placement of polyethylene (PE) pipe or conduit below ground using maxi-horizontal directional drilling equipment. The pipes or conduits may be used for various applications including...

ASTM D8225-26 - Standard Test Method for Determination of Cracking Tolerance Index of Asphalt Mixture Using the Indirect Tensile Cracking Test at Intermediate Temperature
May 1, 2026 - ASTM International

5.1 The indirect tensile cracking test is used to determine asphalt mixture cracking resistance at an intermediate temperature which could range from 5?°C to 35?°C, depending on local climate. The specimens are readily obtained from Superpave gyratory compactor compacted cylinders with a diameter...

API SPEC 16A - Specification for Drill-through Equipment
April 1, 2017 - API

This specification defines the requirements for performance, design, materials, testing and inspection, welding, marking, handling, storing, and shipping of drill-through equipment used for drilling for oil and gas. It also defines service conditions in terms of pressure,...

API SPEC 16F - Specification for Marine Drilling Riser Equipment
November 1, 2017 - API

This specification establishes standards of performance and quality for the design, manufacture, and fabrication of marine drilling riser equipment used in conjunction with a subsea blowout preventer (BOP) stack. This specification provides the requirements for the following major...

ASTM F1962-25 - Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings
March 15, 2025 - ASTM International

1.1 This guide describes the design, selection considerations, and installation procedures for the placement of polyethylene (PE) pipe or conduit below ground using maxi-horizontal directional drilling equipment. The pipes or conduits may be used for various applications including...

ASTM A1099/A1099M-20(2025) - Standard Specification for Modified Alloy Steel Forgings, Forged Bar, and Rolled Bar Commonly Used in Oil and Gas Pressure Vessels
March 1, 2025 - ASTM International

1.1 This specification covers modified high-strength alloy steel forgings and rolled and forged bar for oil and gas pressure vessels and oilfield equipment. See Appendix X1. Oil and gas product specifications for which this material is intended include, but are not limited to, the following:...

ASTM D8605/D8605M-26 - Standard Test Method for Use of the Pocket Penetrometer on Cohesive Soils
April 1, 2026 - ASTM International

1.1 This test method describes the use of the pocket penetrometer and allows for a simple and portable method to evaluate the consistency of cohesive soils. The pocket penetrometer is considered an index test and not an engineering test. 1.2 The test method can be used in the field or laboratory...

ASTM D6067/D6067M-25 - Standard Practice for Using the Electronic Piezocone Penetrometer Tests for Environmental Site Characterization and Estimation of Hydraulic Conductivity
December 1, 2025 - ASTM International

4.1 Environmental site characterization projects almost always require information regarding subsurface soil stratigraphy and hydraulic parameters related to groundwater flow rate and direction. Soil stratigraphy often is determined by various drilling procedures and interpreting the data...

ASTM D1143/D1143M-26 - Standard Test Methods for Deep Foundation Elements Under Static Axial Compressive Load
March 15, 2026 - ASTM International

5.1 Field tests provide the most reliable relationship between the axial load applied to a deep foundation and the resulting axial movement. Test results may also provide information used to assess the distribution of side shear resistance along the element, the amount of end bearing developed at...

ASTM D8169/D8169M-26 - Standard Test Methods for Deep Foundation Elements Under Bi-Directional Static Axial Compressive Load
March 15, 2026 - ASTM International

4.1 The bi-directional axial compressive load test provides separate, direct measurements of the axial capacity mobilized above an embedded jack assembly and element end bearing plus any axial capacity mobilized below the jack assembly. The maximum mobilized axial capacity equals two times the...

DIN EN 16228-3 - Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD)
October 1, 2014 - DIN

This European Standard, together with part 1, deals with all significant hazards for horizontal directional drilling equipment (HDD) when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life...

ASTM D7400/D7400M-26 - Standard Test Methods for Downhole Seismic Testing
February 15, 2026 - ASTM International

5.1 The seismic downhole method provides a designer with information pertinent to the seismic wave velocities of the materials in question (1). The P-wave and S-wave velocities are directly related to the important geotechnical elastic constants of Poisson's ratio, shear modulus, bulk modulus, and...

ASTM D6151-25 - Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling
July 1, 2025 - ASTM International

1.1 This practice describes equipment and procedures to obtain soil samples using Hollow-Stem Auger (HSA) sampling systems and use of hollow-stem auger drilling methods for geotechnical exploration. This practice addresses how to obtain soil samples suitable for engineering properties...

ASTM D5875/D5875M-18(2025) - Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water Quality Monitoring Devices
July 1, 2025 - ASTM International

4.1 Cable-tool rigs (also referred to as churn rigs, water-well drilling rigs, spudders, or percussion rigs) are used in the oil fields and in the water-well industry. The Chinese developed the percussion method some 4,000 years ago. 4.2 Cable-tool drilling and sampling methods may be...

DS/EN 16228-3 - Drilling and foundation equipment – Safety – Part 3: Horizontal directional drilling equipment (HDD)
July 7, 2014 - DS

This European Standard, together with part 1, deals with all significant hazards for horizontal directional drilling equipment (HDD) when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life...

Advertisement