FOREWORD The Sheet Metal and Air Conditioning Contractors' National Association presents this Ducted Electric Heat Guide for Air Handling Systems to assist contractors, designers and authorities in the installation and use of electric duct heaters in low pressure and low velocity...
The scope of this Thermoset FRP Duct Construction Manual (hereinafter referred to as "FRP DCS") includes the determination of the necessary construction details for the fabrication and installation of thermoset FRP duct within the following general categories, and as further detailed...
The scope of this manual includes the determination of the necessary construction details for the fabrication and installation of round metallic industrial ductwork within the following general categories, and as further detailed in the scope of individual chapters, through a variety of both...
This manual provides the duct system designer with the technical information required to design a complete air distribution system. This text has been extensively revised and updated, and now includes key portions of the previously separate Duct Design Home Course Study material....
The scope of this manual includes the determination of the necessary construction details for the fabrication and installation of rectangular metallic industrial duct within the following general categories, and as further detailed in the scope of individual chapters, through a variety of...
INTRODUCTION This guide is a compilation of standards and construction techniques which have received wide acceptance for the fabrication and installation of ducts designed to convey air and gases, usually contaminated with particulates, fumes, vapors or corrosive aerosols.
This document gives reasons for doing inspections of air handling systems, provides outlines that can be used to organize and conduct inspections, and sets forth checklists that call attention to the basic features of ductwork and items placed in duct systems. It presumes that SMACNA's...
Foreword Proper Use of Smoke Detectors in Duct Applications The purpose of this guide is to provide much needed information concerning the proper use of smoke detectors in duct applications. Duct mounted smoke detectors are designed to provide a specific type of protection that...
The scope of this manual includes the determination of the necessary construction details for the fabrication and installation of rectangular metallic industrial duct within the following general categories, and as further detailed in the scope of individual chapters, through a variety of...
FOREWORD This Third Edition of the SMACNA commercial metal and flexible duct construction standards is another in a long line dating from the 1950s. A quick overview of the changes is provided in the front of this manual. SMACNA expresses appreciation to the many who have offered suggestions...
PURPOSE This manual proposes to accomplish three practical objectives: (a) To develop minimum standards for fabrication and installation of plastic duct which can be used as a reference for contract operations. (b) To develop a source of reference data for design engineers, industrial...
1.1 This practice describes procedures for specimen preparation and mounting when testing pipe and duct insulation materials to assess flame spread and smoke development as surface burning characteristics using Test Method E84. 1.2 If the pipe or duct insulation materials to be tested...
5.1 Residential duct systems are often field designed and assembled. There are many joints, often of dissimilar materials that require both mechanical connection and air sealing. Without this sealing, duct systems would be extremely leaky and hence inefficient. While some duct...
This specification covers the composition, dimensions, and physical properties of flexible unfaced foam sheet, used to insulate interior surfaces of HVAC ducts, plenums and equipment used for the distribution of conditioned air. The flexible polymeric insulations of this specification are...
1.1 This test method covers the laboratory testing of some of the acoustical properties of sound attenuating devices including duct liner materials, integral ducts, and in-duct absorptive straight and elbow silencers used in the ventilation systems of buildings. Procedures are...
Narrow Your Results