loading
ASTM E3001-20(2026) - Standard Practice for Workforce Education in Nanotechnology Characterization
June 1, 2026 - ASTM International

5.1 This practice establishes the basic structure for education in the characterization of nanoscale materials at the undergraduate college level. The approach taken is to classify specific characterization methods into two tiers, with a minimum number of methods to be selected from each tier and...

ASTM E3034-20(2026) - Standard Guide for Workforce Education in Nanotechnology Pattern Generation
June 1, 2026 - ASTM International

5.1 The purpose of this guide is to provide a basic educational structure for pattern generation in nanotechnology to organizations developing or carrying out education programs for the nanotechnology workforce. This guide helps to describe the minimum knowledge base for anyone involved in...

ASTM E2996-20(2026) - Standard Guide for Workforce Education in Nanotechnology Health and Safety
June 1, 2026 - ASTM International

5.1 This guide is to provide, at the undergraduate college level, a basic educational structure in the health and safety aspects of nanotechnology to organizations developing or carrying out education programs for the nanotechnology workforce. This guide helps to describe the minimum...

ASTM D5646-13(2025) - Standard Terminology Relating to Seams and Stitches Used in Home Sewing
November 1, 2025 - ASTM International

1.1 This terminology covers basic stitches made by sewing machines designed for home use and provides a uniform, easily understood language for the definitions and descriptions of seams and seam finishes used in home sewing. 1.1.1 These terms and definitions are not necessarily consistent with...

ASTM E3136-25 - Standard Guide for Climate Resiliency in Water Resources
April 1, 2025 - ASTM International

4.1 This Guide addresses issues related solely to resiliency strategies and the development of a plan to address extreme weather and related physical and chemical changes to water resources. This guide does not include specific advice on risk assessment, however, references are provided in Appendix...

ASTM E985-24 - Standard Specification for Permanent Metal Railing Systems and Rails for Buildings
April 15, 2024 - ASTM International

This specification covers permanent metal railing systems (such as guard, stair, and ramp-rail systems) and rails (such as hand, wall, grab, and transfer rails) for use in agricultural, assembly, commercial, educational, industrial, institutional, recreational, and residential buildings....

ASTM F2479-24b - Standard Guide for Specification, Purchase, Installation and Maintenance of Poured-In-Place Playground Surfacing
June 1, 2024 - ASTM International

1.1 This guide covers information with regard to the design, manufacture, installation, and maintenance of poured-in-place playground surfaces. Note 1: This document is a guide and not intended to be used as a specification; it should be used for educational purposes. 1.2 This guide outlines...

ASTM F2479-24a - Standard Guide for Specification, Purchase, Installation and Maintenance of Poured-In-Place Playground Surfacing
May 1, 2024 - ASTM International

1.1 This guide covers information with regard to the design, manufacture, installation, and maintenance of poured-in-place playground surfaces. Note 1: This document is a guide and not intended to be used as a specification; it should be used for educational purposes. 1.2 This guide outlines...

UL 3300 - Service, Communication, Information, Education and Entertainment Robots - SCIEE Robots
May 14, 2024 - ULSE

These requirements cover the safety of the robotic function of Service, Communication, Information, Education and Entertainment (SCIEE) robots. These requirements supplement the safety requirements for the intended, non-robotic product function as described in the relevant identified standard(s)...

ASTM E2358-24 - Standard Specification for Performance of Glazing in Permanent Railing Systems, Guards, and Balustrades
March 1, 2024 - ASTM International

This specification covers the classification, design and performance requirements, and test methods for glass in permanent railing systems, guards, and balustrades installed in agricultural, assembly, commercial, educational, industrial, institutional, recreational, and residential buildings...

ASTM D8452-24 - Standard Guide for Medical-related Professionals within the Cannabis and Hemp Industries
March 1, 2024 - ASTM International

5.1 As patient use of cannabis and hemp for medical purposes increases and medical professionals are increasingly called upon to provide medical advice, the following requirements and expectations within the medical profession are increasingly significant, requiring: 5.1.1 Availability by patients...

ASTM F2479-24 - Standard Guide for Specification, Purchase, Installation and Maintenance of Poured-In-Place Playground Surfacing
March 15, 2024 - ASTM International

1.1 This guide covers information with regard to the design, manufacture, installation, and maintenance of poured-in-place playground surfaces. Note 1: This document is a guide and not intended to be used as a specification; it should be used for educational purposes. 1.2 This guide outlines...

ASTM E2849-18(2024) - Standard Practice for Professional Certification Performance Testing
February 1, 2024 - ASTM International

1.1 This practice covers both the professional certification performance test itself and specific aspects of the process that produced it. 1.2 This practice does not include management systems. In this practice, the test itself and its administration, psychometric properties, and scoring are...

ASTM E3225-24 - Standard Practice for Performing Visual Examination of Containment Sumps
February 1, 2024 - ASTM International

1.1 This practice describes a visual examination to determine if a containment sump has been compromised and to identify any compromised components. 1.2 United States of America federal regulations found in 40 CFR 280 address inspection and testing of spill prevention equipment and containment...

ASTM E3175-23 - Standard Practice for Training in the Forensic Examination of Hair by Microscopy
October 1, 2023 - ASTM International

4.1 A training program provides the theoretical foundation and practical skills necessary for a trainee to become a qualified forensic hair examiner. 4.2 A trainee is directly supervised by a qualified examiner throughout their training. At the end of the training program, a successful trainee is...

ASTM E894-23 - Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings
July 1, 2023 - ASTM International

1.1 This test method covers procedures to be followed in testing the performance of the anchorage of all types of new and existing permanent metal railing systems (guard, stair, and ramp-rail systems), and rails (hand, grab, and transfer rails) installed in and for agricultural, assembly,...

ASTM F963-23 - Standard Consumer Safety Specification for Toy Safety
August 1, 2023 - ASTM International

1.1 This specification2 relates to possible hazards that may not be recognized readily by the public and that may be encountered in the normal use for which a toy is intended or after reasonably foreseeable abuse. It does not purport to cover every conceivable hazard of a particular toy. This...

ASTM E3175-22 - Standard Practice for Training in the Forensic Examination of Hair by Microscopy
November 1, 2022 - ASTM International

4.1 A training program provides the theoretical foundation and practical skills necessary for a trainee to become a qualified forensic hair examiner. 4.2 A trainee is directly supervised by a qualified examiner throughout their training. At the end of the training program, a successful trainee is...

ASTM F590-22 - Standard Consumer Safety Specification for Non-Powder Gun Projectiles and Propellants
December 1, 2022 - ASTM International

1.1 This consumer safety specification covers projectiles and propellants manufactured for use with non-powder guns intended for target shooting, educational, and recreational purposes and is to be used in conjunction with Consumer Safety Specification F589. Non-powder guns are commonly...

ASTM E3280-22 - Standard Guide for the Safe Use of Table Saws
October 1, 2022 - ASTM International

1.1 This guide provides information promoting the safe use of table saws based on recommended practices in the United States, but may not reflect practices outside of the U.S. This guide includes the following activities: 1.1.1 Installation; 1.1.2 Setup; 1.1.3 Operation; and 1.1.4 Maintenance. 1.2...

Advertisement