loading
ASTM E960-93(2026) - Standard Specification for Laboratory Glass Beakers
June 1, 2026 - ASTM International

This specification provides standard dimensional requirements for glass beakers suitable for general laboratory use. The glass beakers are classified into types and sizes and are presented in details. The glass beaker types are: type I - low form with spout; type II - low form, with spout heavy...

ASTM G225-26 - Standard Practice for Electrochemical Measurement of Corrosion Rate of Metals in Field Concrete Structures
May 15, 2026 - ASTM International

5.1 Because of its simplicity and accuracy, the polarization resistance technique has been widely used in the laboratory in numerous metal/electrolyte systems (2, 7-10). However, its application in real-size elements is not straightforward because of the need for referral to the actual...

ASTM D6581-18(2026) - Standard Test Methods for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Suppressed Ion Chromatography
May 1, 2026 - ASTM International

1.1 These multi-test methods cover the determination of the oxyhalides-chlorite, bromate, and chlorate, and bromide, in raw water, finished drinking water and bottled (non-carbonated) water by chemically and electrolytically suppressed ion chromatography. The ranges tested using these test...

ASTM B636/B636M-15(2026) - Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
April 1, 2026 - ASTM International

1.1 This test method covers the use of the spiral contractometer for measuring the internal stress of metallic coatings as produced from plating solutions on a helical cathode. The test method can be used with electrolytic and autocatalytic deposits. 1.2 The values stated in either SI units...

ASTM D4748-26 - Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Ground Penetrating Radar
April 1, 2026 - ASTM International

1.1 This test method covers the nondestructive determination of the thickness of bound pavement layers using ground penetrating radar (GPR). 1.2 This test method may not be suitable for application to pavements which exhibit increased conductivity due to the increased attenuation of the...

ASTM D7148-19a(2025) - Standard Test Method for Determining the Ionic Resistivity (ER) of Alkaline Battery Separator Using a Carbon Electrode in an Electrolyte Bath Measuring System
December 1, 2025 - ASTM International

1.1 This test method covers the pretreatment, test conditions, apparatus, and procedure to determine the ionic resistivity, commonly referred to in the battery industry as electrical resistance (ER) of an alkaline battery separator immersed in an electrolyte of 40?% potassium hydroxide (KOH)...

ASTM B614-26 - Standard Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces
April 1, 2026 - ASTM International

This practice covers a cleaning and de-scaling procedure useful to producers, users, and fabricators of zirconium and zirconium alloys for the removal of ordinary shop soils, oxides, and scales resulting from heat treatment operations and foreign substances present as surface contaminants. Grease,...

ASTM D3376-25 - Standard Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation
December 1, 2025 - ASTM International

8.1 The conductivity of the water extract of electrical grade pulp results from electrolytic impurities in the pulp potentially present as ionizable acids, bases, salts, or a combination of these. The presence of electrolytic impurities in electrical insulation is undesirable as they...

ASTM F3044-26 - Standard Test Method for Evaluating the Potential for Galvanic Corrosion for Medical Implants
February 1, 2026 - ASTM International

1.1 This test method covers conducting galvanic corrosion tests to characterize the behavior of two dissimilar metals in electrical contact that are to be used in the human body as medical implants or as component parts to medical implants. Examples of the types of devices that might be assessed...

ASTM F3268-26 - Standard Guide for in vitro Degradation Testing of Absorbable Metals
February 1, 2026 - ASTM International

1.1 The purpose of this standard is to outline appropriate experimental approaches for conducting an initial evaluation of the in vitro degradation properties of a device or test sample fabricated from an absorbable metal or alloy. 1.2 The described experimental approaches are intended to control...

ASTM D3376-18(2025) - Standard Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation
September 1, 2025 - ASTM International

8.1 The conductivity of the water extract of electrical grade pulp results from electrolytic impurities in the pulp potentially present as ionizable acids, bases, salts, or a combination of these. The presence of electrolytic impurities in electrical insulation is undesirable as they...

ASTM B558-25 - Standard Practice for Preparation of Nickel Alloys for Electroplating
November 1, 2025 - ASTM International

This practice serves as a guide for the preparation of nickel alloy substrates that shall undergo electroplating processes involving adherent nickel electrodeposits. Surface cleaning may be done either by degreasing (including vapor degreasing, solvent wash, emulsion cleaning, or soak cleaning), or...

ASTM B242-99(2025) - Standard Guide for Preparation of High-Carbon Steel for Electroplating
November 1, 2025 - ASTM International

This guide outlines the standard procedure for establishing and maintaining a preparatory cycle for electroplating on high carbon steel producing minimal hydrogen embrittlement and maximal adhesion of the electrodeposited metal. The reagents needed for this method are technical grade hydrochloric...

ASTM D8149-20(2025) - Standard Practice for Optimization, Calibration, and Validation of Ion Chromatographic Determination of Heteroatoms and Anions in Petroleum Products and Lubricants
November 1, 2025 - ASTM International

1.1 This practice covers the information on calibration, quality control, and operational guidance for anionic measurements using ion chromatography (IC). 1.2 IC Related Standards-Chemically or electrolytically regenerated suppressed ion chromatography standards for aqueous matrices include...

ASTM C1854-25 - Standard Test Method for Determination of Hydrogen (total from all sources) in Mixed Oxide ((U, Pu)O2) Sintered Pellets by the Inert Gas Fusion Technique Followed by Thermal Conductivity Measurement
November 1, 2025 - ASTM International

1.1 This test method covers the determination of hydrogen in nuclear-grade mixed oxides (MOX) of uranium and plutonium ((U, Pu)O2) sintered MOX fuel pellets. This test method is an alternative to Test Method C698 for the determination of moisture in nuclear-grade sintered MOX fuel pellets. Test...

ASTM A917-25 - Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
October 1, 2025 - ASTM International

1.1 This specification covers hot-rolled and cold-rolled steel sheet coated by the electrolytic process. Coatings can be comprised of pure metals or metal alloys. For specific coatings, refer to Specifications A879/A879M and A918. 1.2 The product shall be coated on one or both surfaces with...

ASTM A918-25 - Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
October 1, 2025 - ASTM International

This specification covers zinc-nickel alloy coatings applied by the electrolytic process to hot-rolled and cold-rolled steel sheets for applications requiring designation of the coating mass on each surface. Coating application shall be done on one or both surfaces with equal or differential...

ASTM A601/A601M-10(2025) - Standard Specification for Electrolytic Manganese Metal
September 1, 2025 - ASTM International

1.1 This specification covers several grades of electrolytic manganese designated as follows: Grade Regular A Intermediate Hydrogen B Low Hydrogen C 4.5?% Nitrogen Bearing D 6?% Nitrogen Bearing E Weld Grade Powder F 1.2 Units-The values stated in either SI units or inch-pound units are to...

ASTM D4327-17(2025) - Standard Test Method for Anions in Water by Suppressed Ion Chromatography
July 1, 2025 - ASTM International

1.1 This test method2,3 covers the sequential determination of fluoride, chloride, nitrite, ortho-phosphate, bromide, nitrate, and sulfate ions in water by suppressed ion chromatography. Note 1: Order of elution is dependent upon the column used; see Fig. 1. ??Sample loop: 50 μL. 1.5 The upper...

ASTM E2014-17(2025) - Standard Guide on Metallographic Laboratory Safety
August 1, 2025 - ASTM International

1.1 This guide outlines the basic safety guidelines to be used in a metallographic laboratory. Safe working habits are discussed for various tasks performed in a metallographic laboratory. 1.2 The sections appear in the following order: Section Scope 1 Referenced Documents 2 Terminology 3...

Advertisement