loading
IEEE ELECTRONIC AND - ELECTRONIC AND PHOTONIC CIRCUITS AND DEVICES
IEEE
A description is not available for this item.
IEEE ELECTRONICS HDBK - ELECTRONICS ENGINEERS' HANDBOOK, FOURTH EDITION
IEEE
A description is not available for this item.
IEEE ELECTRONICS HANDBOOK - THE ELECTRONICS HANDBOOK
IEEE
A description is not available for this item.
ASTM E1324-21(2026) - Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing Instruments
May 1, 2026 - ASTM International

1.1 This guide describes procedures for electronically measuring the following performance-related characteristics of some sections of ultrasonic instruments: 1.1.1 Power Supply Section: ??????line regulation, ???????battery discharge time, and ???????battery charge time. 1.1.2 Pulser...

ASTM B452-22(2026) - Standard Specification for Copper-Clad Steel Wire for Electronic Application
May 1, 2026 - ASTM International

This specification covers bare round copper-clad steel wire for electronic application. Four classes of copper-clad steel wire are covered as Class 30HS, 30A, 40HS, and 40A. The wire shall consist of a core of homogeneous open-hearth, electric-furnace, or basic-oxygen steel with a continuous...

ASTM E1112-00(2026) - Standard Specification for Electronic Thermometer for Intermittent Determination of Patient Temperature
May 1, 2026 - ASTM International

This specification covers electronic instruments intended for intermittent monitoring of patient temperatures. The temperature range of the instrument shall display temperature within the specific range requirement and regards to its accuracy, no individual reading shall be in error by more...

ASTM E376-26 - Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy Current (Electromagnetic) Testing Methods
July 1, 2026 - ASTM International

4.1 General-Most thickness gauges are not applicable to all combinations of coating-substrate thicknesses and materials. The limitations of a particular instrument are generally delineated by its manufacturer. The substrate material and coating combination to be measured as well as the inherent...

ASTM F1892-26 - Standard Guide for Ionizing Radiation (Total Dose) Effects Testing of Semiconductor Devices
June 1, 2026 - ASTM International

5.1 Electronic circuits used in space, military, and nuclear power systems may be exposed to various levels of ionizing radiation. It is essential for the design and fabrication of such circuits that test methods be available that can determine the vulnerability or hardness (measure of...

ASTM E2985/E2985M-26 - Standard Practice for Determination of Metal Purity Based on Elastic Constant Measurements Derived from Resonant Ultrasound Spectroscopy
June 15, 2026 - ASTM International

5.1 Since the beginning of human history, currency has existed in the form of metal coins and bullion. Thieves learned that shaving some precious metal provided a method to change its value. Substitution of common metals for precious metals of higher value was commonplace until weighing methods...

ASTM F3011-26 - Standard Specification for Performance of Angle of Attack System
June 1, 2026 - ASTM International

This specification establishes functional operation and minimum performance requirements for simple systems that provide angle-of-attack information to a pilot, aircraft, or other systems. Functional requirements cover basic operation, stall indication, startup of electronically driven...

ASTM E3022-26a - Standard Practice for Measurement of Emission Characteristics and Requirements for LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle Testing
July 1, 2026 - ASTM International

1.1 This practice covers the procedures for testing the performance of ultraviolet A (UV-A), light emitting diode (LED) lamps used in fluorescent penetrant and fluorescent magnetic particle testing (see Guides E709 and E2297, and Practices E165/E165M, E1208, E1209, E1210, E1219, E1417/E1417M, and...

ASTM E2730-22(2026) - Standard Guide for Calibration and Use of Thermocouple Reference Junction Probes in Evaluation of Electronic Reference Junction Compensation Circuits
April 1, 2026 - ASTM International

1.1 This guide covers methods of calibration and use of thermocouple reference junction probes (cold junction compensation probes) in the evaluation of electronic reference junction compensation circuits. Their use with instruments that measure only voltage is also covered. 1.2 The values...

ASTM D1711-26 - Standard Terminology Relating to Electrical Insulation
June 1, 2026 - ASTM International

1.1 This terminology standard is a compilation of technical terms associated with testing and specifying solid electrical and electronic insulating materials. 1.2 This terminology standard shall contain all definitions that are balloted specifically through Subcommittee D09.94 and through...

ASTM D1000-26 - Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
June 1, 2026 - ASTM International

1.1 These test methods cover procedures for testing pressure-sensitive adhesive-coated tapes to be used as electrical insulation. These tapes are classified as follows: 1.1.1 Class 1-Non-elastomeric backings made from materials such as: Paper, flat or creped, Fabric, uncoated or coated, Cellulose...

ASTM D8673/D8673M-26 - Standard Test Method for Using Handheld Electronic or Bimetal Thermometers to Monitor Asphalt Mixture Temperatures in the Field
June 1, 2026 - ASTM International

4.1 The temperature of an asphalt mixture during production, placement, and compaction is one of the primary factors that affect the long-term performance of an asphalt pavement due to temperature's effect on the ability to compact an asphalt mixture. In general, the higher the temperature of an...

ASTM ASTM51261-26 - Standard Practice for Calibration of Routine Dosimetry Systems for Radiation Processing
May 1, 2026 - ASTM International

4.1 Standards such as ISO 11137-1 for radiation sterilization of healthcare products and ISO 14470 for irradiation of food state that dosimetry used in the process's development, validation, and routine control adhere to specific requirements. These requirements state that the dosimetry must be...

ASTM E569/E569M-26 - Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation
May 1, 2026 - ASTM International

This practice provides guidelines for acoustic emission (AE) examination or monitoring of structures, such as pressure vessels, piping systems, or other structures that can be stressed by mechanical or thermal means. The basic functions of an AE monitoring system are to detect, locate, and classify...

ASTM E749/E749M-26 - Standard Practice for Acoustic Emission Monitoring During Continuous Welding
May 1, 2026 - ASTM International

4.1 Detection and location of AE sources in weldments during fabrication may provide information related to the integrity of the weld. Such information may be used to direct repair procedures on the weld or as a guide for application of other nondestructive evaluation (NDE) methods. A major...

Advertisement