loading
NEBB ENVIRONMENTAL SYSTEM - Enviromental Systems Technology
January 1, 1999 - NEBB

This publication has more than 1,020 pages written specifically for persons who need extensive information on heating, ventilating, and air-conditioning (HVAC) systems for background, reference, and practical applications. A true collector's item, this handsomely appointed, hard-back book brings...

TI EUROPEAN LAW - EUROPEAN LAW
TI/UK
A description is not available for this item.
EUROPEAN LAW - EUROPEAN LAW
TI/UK
A description is not available for this item.
ASTM E2912-26 - Standard Test Method for Fire Test of Non-Mechanical Fire Dampers Used in Vented Construction
May 1, 2026 - ASTM International

1.1 This fire-test-response standard assesses the ability of non-mechanical fire dampers used in vented construction in its open state to limit passage of hot gases, radiation, and flames during a prescribed fire test exposure. The fire exposure condition in this test method is sudden direct flame...

ASTM D8274-25a - Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil by Portable Rapid Mid-Infrared Analyzer
December 1, 2025 - ASTM International

1.1 This test method covers the determination of the content of biodiesel (fatty acid methyl esters (FAME)) in diesel fuel oils for volume fractions of 0.1?% to 40.0?% by mid-infrared analyzer. Note 1: ASTM and ISO specification fuels falling within the scope of this test method include...

ASTM E1710-18(2025) - Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer
November 1, 2025 - ASTM International

1.1 This test method covers measurement of the retroreflective properties of horizontal pavement marking materials containing retroreflecting beads, such as traffic stripes and surface symbols, using a portable retroreflectometer that can be placed on the road delineation to measure the...

ASTM F2872-25 - Standard Specification for 225/75R16C 116/114S M+S Radial Light Truck Standard Reference Test Tire
September 1, 2025 - ASTM International

1.1 This specification covers the general requirements for the 225/75R16C 116/114S radial light truck (or European light duty vehicle) standard reference test tire. The tire covered by this specification is primarily for use as a reference tire for braking traction, snow traction, and wear...

ASTM D6890-25 - Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
November 1, 2025 - ASTM International

1.1 This automated laboratory test method covers the quantitative determination of the ignition characteristics of conventional diesel fuel oil, oil-sands based fuels, hydrocarbon oils, blends of fuel containing biodiesel material, diesel fuel oils containing cetane number improver additives, and...

ASTM F2064-25 - Standard Guide for Characterization and Testing of Alginates as Starting Materials Intended for Use in Biomedical and Tissue-Engineered Medical Product Applications
October 1, 2025 - ASTM International

1.1 This guide covers the evaluation of alginates suitable for use in biomedical or pharmaceutical applications, or both, including, but not limited to, tissue-engineered medical products (TEMPs). 1.2 This guide addresses key parameters relevant for the functionality, characterization, and purity...

ASTM E2931-13(2025) - Standard Test Method for Limiting Oxygen (Oxidant) Concentration of Combustible Dust Clouds
October 1, 2025 - ASTM International

5.1 This test method provides a procedure for performing laboratory tests to evaluate relative deflagration parameters of dusts. 5.2 Knowledge of the limiting oxygen (oxidant) concentration is needed for safe operation of some chemical processes. This information may be needed in order to start up,...

ASTM D6245-25 - Standard Guide on the Relationship of Indoor Carbon Dioxide Concentrations to Indoor Air Quality and Ventilation
September 1, 2025 - ASTM International

1.1 This guide describes the relationship of indoor carbon dioxide (CO2) concentrations to indoor air quality (IAQ) and building ventilation. 1.2 This guide contains background information on the health, comfort, and performance impacts of indoor CO2 exposure, as well as indoor CO2 limits contained...

ASTM F2725-19(2025) - Standard Guide for European Union's Registration, Evaluation, and Authorization of Chemicals (REACH) Supply Chain Information Exchange
July 1, 2025 - ASTM International

1.1 This guide will assist companies that manufacture, buy, or sell, or both, substances, preparations, and articles to ensure that supply chains comply with the European Union's Registration, Evaluation, and Authorization of Chemicals (REACH) regulation. This is accomplished by identifying...

ASTM D7109-25 - Standard Test Method for Shear Stability of Polymer-Containing Fluids Using a European Diesel Injector Apparatus at 30 Cycles and 90 Cycles
July 1, 2025 - ASTM International

1.1 This test method covers the evaluation of the shear stability of polymer-containing fluids. The test method measures the viscosity loss, in mm2/s and percent, at 100?°C of polymer-containing fluids when evaluated by a diesel injector apparatus procedure that uses European diesel injector...

ASTM D8625-25 - Standard Test Method for Chemical Assessment of Air Cleaning Technologies
August 1, 2025 - ASTM International

1.1 This test method covers the measurement of the removal rate of injected challenge chemicals and ultrafine particles by portable air cleaners. This test method also evaluates the extent that portable air cleaners produce a limited set of reaction byproducts: formaldehyde, ozone, nitrogen oxides...

ASTM D8625-25e1 - Standard Test Method for Chemical Assessment of Air Cleaning Technologies
August 1, 2025 - ASTM International

1.1 This test method covers the measurement of the removal rate of injected challenge chemicals and ultrafine particles by portable air cleaners. This test method also evaluates the extent that portable air cleaners produce a limited set of reaction byproducts: formaldehyde, ozone, nitrogen oxides...

ASTM E3249-25 - Standard Guide for Remedial Action Resiliency to Climate Impacts
April 1, 2025 - ASTM International

4.1 This guide outlines various techniques for evaluating and mitigating the impacts of climate change and weather extremes on remediation systems, activity and use limitations, stewardship and remediation activities. 4.2 Users include: local, state, federal, tribal, and international agencies; the...

Advertisement