loading
SPI FIBERGLASS PANELS - FIBERGLASS REINFORCED PANELS, REC INSTALL PRACTICE
SPI
A description is not available for this item.
AWWA FIBERGLASS SET - AWWA FIBERGLASS SET
AWWA
A description is not available for this item.
ASTM C336-26 - Standard Test Method for Annealing Point and Strain Point of Glass by Fiber Elongation
July 1, 2026 - ASTM International

1.1 This test method covers the determination of the annealing point and the strain point of a glass by measuring the viscous elongation rate of a fiber of the glass under prescribed condition. 1.2 The annealing and strain points shall be obtained by following the specified procedure after...

ASTM D3262-26 - Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
July 1, 2026 - ASTM International

1.1 This specification covers machine-made fiberglass pipe intended for use in gravity-flow systems for conveying sanitary sewage, storm water, and some industrial wastes. Both glass-fiber-reinforced thermosetting-resin pipe (RTRP) and glass-fiber-reinforced polymer mortar pipe (RPMP)...

ASTM F2462-05(2026) - Standard Practice for Operation and Maintenance of Sewers with Optical Fiber Systems
June 1, 2026 - ASTM International

5.1 This is intended to outline O&M issues that require discussion and mutual agreement by both the optical fiber cable owner and sewer pipeline operator. The purpose is developing sufficient written procedures and practices to allow optical fiber systems to coexist as a secondary use...

ASTM C1186-26 - Standard Specification for Flat Fiber-Cement Sheets
April 1, 2026 - ASTM International

1.1 This specification covers either untextured or surface textured fiber-cement flat sheets intended for exterior applications such as wall claddings, facades, curtain walls, soffits, trim, and so forth. 1.2 This specification is not applicable to asbestos-cement flat sheets (Specification...

ASTM C1468-19a(2026) - Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature
June 1, 2026 - ASTM International

1.1 This test method covers the determination of transthickness tensile strength under monotonic uniaxial tensile loading of continuous fiber-reinforced ceramics (CFCC) at ambient temperature. This test method addresses, but is not restricted to, various suggested test specimen geometries,...

ASTM C1425-19(2026) - Standard Test Method for Interlaminar Shear Strength of 1D and 2D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures
June 1, 2026 - ASTM International

5.1 Continuous fiber-reinforced ceramic composites are candidate materials for structural applications requiring high degrees of wear, erosion, corrosion resistance, and damage tolerance at high temperatures. 5.2 The 1D and 2D CFCCs are highly anisotropic and their transthickness tensile and...

ASTM C1946-26 - Standard Test Method for Determination of Glass-Fiber Roving Chopping Rate for Glass Fiber Reinforced Concrete
June 1, 2026 - ASTM International

5.1 Glass-fiber roving chopping rates, determined by this test method, are useful for quality control of GFRC products to ensure that manufacturing equipment has been set up to deliver the correct proportions of concrete and glass fiber reinforcement for producing a GFRC composite....

ASTM C1930-26 - Standard Test Method for Determination of Slurry Flow Rate of Fresh Glass Fiber Reinforced Concrete
June 1, 2026 - ASTM International

5.1 Slurry Flow Rates, determined by this test method, are useful for quality control of GFRC products to ensure that manufacturing equipment has been set up to deliver the correct proportions of concrete and glass fiber reinforcement for producing a GFRC composite. This test method is...

ASTM F2075-26 - Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment
June 1, 2026 - ASTM International

1.1 This specification establishes minimum characteristics for those factors that determine particle size, consistency, purity, and ability to drain. 1.2 Engineered wood fiber that meets the requirements of this specification must comply with Specification F1292, if the surface is in the use...

ASTM D8394-21(2026) - Standard Test Method for Automated Measurement of Maturity, Fineness, Ribbon Width, and Micronaire of Cotton Fibers
July 1, 2026 - ASTM International

5.1 Cotton fiber that is on average finer and more mature is more desirable than coarse or immature fiber, although distinction between these qualities cannot be made quickly and accurately using current test methods. Immature fibers break more easily during processing and have...

ASTM E3405-26 - Standard Practice for Forensic Fiber Training Program
March 1, 2026 - ASTM International

4.1 This practice details a fiber training program that identifies the information and guidelines necessary for preparing a trainee to become a qualified FSP. The trainee is under the direct supervision of a qualified FSP throughout their training. Upon successful completion of the program,...

ASTM D7139-20(2026) - Standard Terminology for Cotton Fibers
July 1, 2026 - ASTM International

1.1 This standard is the compilation of all terminology developed by Subcommittee D13.11 on Cotton Fibers. 1.2 This terminology is unique to the Cotton Fibers industry. Meanings of the same terms used outside the industry can be found in other compilations or in dictionaries of...

ASTM F2233-03(2026) - Standard Guide for Safety, Access Rights, Construction, Liability, and Risk Management for Optical Fiber Networks in Existing Sewers
June 1, 2026 - ASTM International

1.1 This guide addresses only primary safety concerns, easements, constructability, liability of the various parties, and risk management related to constructing, installing, maintaining, or changing an optical fiber network in an existing sewer. 1.2 The text of this standard references...

ASTM E2661/E2661M-26 - Standard Practice for Acoustic Emission Examination of Plate-like and Flat Panel Composite Structures Used in Aerospace Applications
July 1, 2026 - ASTM International

1.1 This practice covers acoustic emission (AE) examination or monitoring of panel and plate-like composite structures made entirely of fiber/polymer composites. 1.2 The AE examination detects emission sources and locates the region(s) within the composite structure where the emission...

ASTM C1557-20(2026) - Standard Test Method for Tensile Strength and Young's Modulus of Fibers
June 1, 2026 - ASTM International

5.1 Properties determined by this test method are useful in the evaluation of new fibers at the research and development levels. Fibers with diameters up to 250 × 10-6 m are covered by this test method. Very short fibers (including whiskers) call for specialized test techniques...

ASTM D7884-26 - Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Reverse Phase High Performance Liquid Chromatography
July 1, 2026 - ASTM International

4.1 The presence of 4-CBA and p-TOL in PTA used for the production of polyester is undesirable because they can affect the PET quality (such as contribute to fiber breaks), the polymerization process, and 4-CBA imparts coloration to the polymer due to thermal instability. 4.2 Determining the...

ASTM F3782-26 - Standard Practice for Sampling and Testing Synthetic Turf Fiber and Fabric for PFAS
April 1, 2026 - ASTM International

1.1 This practice provides recommended procedures for sampling synthetic turf fiber and finished fabric in a manufacturing location for further testing to identify and quantify per- and polyfluoroalkyl substances (collectively hereafter referred to as PFAS) in synthetic turf fiber and...

ASTM D7018/D7018M-26 - Standard Terminology Relating to Glass Fiber and Its Products
February 15, 2026 - ASTM International

1.1 This standard is a compilation of terminology developed by Committee D13.18 on Glass Fiber and its Products. 1.2 This terminology is unique to glass fibers, strands, yarns, fabrics, etc. in the glass textile industry. Terms that are generally understood or adequately defined in...

Advertisement