This guide reviews the pertinent language contained in the model codes, the terminology used in the codes and other relevant documents, and the requirements of plans and specifications as: (1) developed by architects, engineers, and systems designers; (2) reviewed by code officials; and (3)...
FOREWORD: This pamphlet is prepared for the purpose of making available in convenient form basic principles and rules of good practice which prevent the creation of fire hazards in the marketing of petroleum products. The marketing of more than 50,000,000 gal. of gasoline daily to millions...
1.1 This specification provides design and construction criteria for double and single fire and foam station cabinets. See Fig. 1 and Fig. 2. Valves, hose, and fittings are not included. FIG. 1 Fire and Foam Cabinet-Type I Note 1: 1 in. = 25.4 mm. FIG. 2 Fire and...
1.1 This specification provides design and construction criteria for double and single fire and foam station cabinets. See Fig. 1 and Fig. 2. Valves, hose, and fittings are not included. FIG. 1 Fire and Foam Cabinet-Type I Note 1: 1 in. = 25.4 mm. FIG. 2 Fire and...
This standard establishes test procedures for evaluating the foam fire-fighting equipment installed on aircraft rescue and fire-fighting vehicles designed in accordance with NFPA 414.
1.1 This test method measures the performance of the perimeter fire barrier and its ability to maintain a seal to prevent fire spread during the deflection and deformation of the exterior wall assembly and floor assembly during the fire test, while resisting fire...
1.1 This test method measures the performance of the perimeter fire barrier and its ability to maintain a seal to prevent fire spread during the deflection and deformation of the exterior wall assembly and floor assembly during the fire test, while resisting fire...
This specification covers requirements for the methods of application and finishing of gypsum board. Construction details for a specific assembly to achieve the required fire resistance shall be obtained from reports of fire-resistance tests, engineering evaluations, or listings from...
NOTE: This guide specification covers the requirements for optical flame detection and high-expansion foam fire suppression systems for aircraft hangars for the Army and Air Force.
This part of ISO 7076 specifies requirements and test methods for high expansion foam equipment of fixed-foam extinguishing systems for indoor or outdoor use or both.
This part of ISO 7076 specifies requirements and test methods for medium expansion foam equipment of fixed-foam extinguishing systems for indoor or outdoor use or both.
This Standard specifies requirements for foam concentrates, for controlling and extinguishing hydrocarbon fires in aircraft, ships and vehicles, as well as for general purpose use. Concentrates shall be between 1% and 6% inclusive dependent upon their specified concentration for use....
1.1 This test method measures the performance of the perimeter fire barrier and its ability to maintain a seal to prevent fire spread during the deflection and deformation of the exterior wall assembly and floor assembly during the fire test, while resisting fire...
1.1 This specification covers the general requirements for faced thermal insulation boards composed of rigid cellular polyisocyanurate surfaced with other materials. The insulation boards are intended for use at temperatures between?-40 and 200°F (-40 and 93°C). This specification does not cover...
This specification covers two types of fire extinguishing foam concentrate in the form of a liquid.
Narrow Your Results