loading
IEEE FIRST THINGS FIRST - FIRST THINGS FIRST
IEEE
A description is not available for this item.
AIHA FIRST-TIME - THE FIRST-TIME MANAGER
AIHA
A description is not available for this item.
ASTM D1076-23(2026) - Standard Specification for Rubber—Concentrated, Ammonia Stabilized, Creamed, and Centrifuged Natural Latex
April 1, 2026 - ASTM International

This specification establishes the requirements for first grade concentrated natural rubber latex of the following categories: Category 1, centrifuged Hevea natural latex preserved with ammonia only or by formaldehyde followed by ammonia; Category 2, creamed Hevea natural latex...

ASTM E3362-26 - Standard Guide for Reference Radiographs and Digital Reference Images
July 1, 2026 - ASTM International

1.1 This guide covers the most common questions about reference radiographs and digital reference images and their use. Reference radiographs and digital reference images are used throughout industry to create acceptance specifications by identifying, categorizing, and grading...

ASTM D7155-20(2026) - Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils
March 1, 2026 - ASTM International

5.1 The compatibility of oils can be important for users of oil-lubricated equipment. Mixing of two oils can produce a substance markedly inferior to either of its constituent materials. One or more of the following can occur: 5.1.1 A mixture of incompatible oils most often forms a precipitate. The...

ASTM D4360-11(2026) - Standard Specification for Methyl n-Amyl Ketone
January 1, 2026 - ASTM International

1.1 This specification covers methyl n-amyl ketone (98?% grade) for use in paint, varnish, lacquer, and related products. 1.2 For specific hazard information and guidance, see the supplier's Material Safety Data Sheet for materials listed in this specification. 1.3 The following applies to...

ASTM G101-04(2025) - Standard Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels
October 1, 2025 - ASTM International

1.1 This guide presents two methods for estimating the atmospheric corrosion resistance of low-alloy weathering steels, such as those described in Specifications A242/A242M, A588/A588M, A606/A606M Type 4, A709/A709M grades 50W, HPS 70W, and 100W, A852/A852M, and A871/A871M. One method gives...

ASTM D6728-16(2025) - Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry
November 1, 2025 - ASTM International

1.1 This test method covers the determination of contaminants and materials as a result of corrosion in gas turbine or diesel engine fuels by rotating disc electrode atomic emission spectroscopy (RDE-AES). 1.1.1 The test method is applicable to ASTM Grades 0-GT, 1-GT, 2-GT, 3-GT, and 4-GT...

ASTM A917-25 - Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
October 1, 2025 - ASTM International

1.1 This specification covers hot-rolled and cold-rolled steel sheet coated by the electrolytic process. Coatings can be comprised of pure metals or metal alloys. For specific coatings, refer to Specifications A879/A879M and A918. 1.2 The product shall be coated on one or both surfaces with equal...

ASTM F3794-25 - Standard Practice for Multivariate Fit and Accommodation for Exoskeleton Manufacturers and Designers
November 1, 2025 - ASTM International

5.1 The U.S. exoskeleton marketplace currently lacks a consistent sizing structure and clear criteria for selecting sizes. This inconsistency likely stems from the absence of comprehensive national anthropometric data tailored to exoskeleton design applications. The significant variations in sizing...

MIL-DTL-11132/32 - INSIGNIA, GRADE, FIRST SERGEANT, SENIOR DIVISION, ROTC, U.S. ARMY
June 1, 2020 - NPFC
A description is not available for this item.
ASTM F803-25 - Standard Specification for Eye Protectors for Selected Sports
September 1, 2025 - ASTM International

1.1 This specification covers eye protectors, designed for use by players of basketball, baseball, and soccer to minimize or significantly reduce injury to the eye and adnexa due to impact and penetration by baseballs and softballs, basketballs, soccer balls, hands, elbows, and fingers. Protective...

MIL-DTL-14639/16 - INSIGNIA, GRADE, AIRMAN FIRST CLASS, U.S. AIR FORCE
December 18, 2020 - NPFC
A description is not available for this item.
MIL-DTL-11132/38 - INSIGNIA, GRADE, PRIVATE FIRST CLASS, SENIOR DIVISION, ROTC, U.S. ARMY
June 1, 2020 - NPFC
A description is not available for this item.
MIL-DTL-11132/34 - INSIGNIA, GRADE, SERGEANT FIRST CLASS, SENIOR DIVISION, ROTC, U.S. ARMY
June 1, 2020 - NPFC
A description is not available for this item.
ASTM B610-24 - Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders Intended for Die Compaction
October 1, 2024 - ASTM International

1.1 This standard covers a test method that may be used to measure the sum of the changes in dimensions that occur when a metal powder is first compacted into a test specimen and then sintered. 1.2 The dimensional change is determined by a quantitative laboratory procedure in which the...

ASTM E410-24 - Standard Test Method for Moisture and Residue in Liquid Chlorine
October 1, 2024 - ASTM International

1.1 This test method covers the determination of moisture and residue in liquid chlorine. Lower limits of detection of 10?μg/g based on a 150?mL sample are achievable. 1.2 This test method describes operations and special apparatus for sampling liquid chlorine from cylinders. Sampling other...

ASTM A765/A765M-24 - Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements
August 15, 2024 - ASTM International

1.1 This specification2 covers heat-treated carbon steel and alloy steel forgings with mandatory toughness requirements. These forgings are intended for pressure vessels, feedwater heaters, and similar uses. 1.2 These forgings include tube sheets, covers, channel barrels, integral forged channels,...

MIL-DTL-14639/8 - INSIGNIA, GRADE, FIRST SERGEANT (E-8) U.S. ARMY
December 19, 2017 - NPFC
A description is not available for this item.
ASTM D3265-24a - Standard Test Method for Carbon Black—Tint Strength
June 15, 2024 - ASTM International

4.1 For the broad range of commercial rubber grade carbon blacks, tint strength is highly dependent upon particle size. Tint strength can be used as an indication of particle size; however, tint strength is also dependent on structure and aggregate size distribution. Therefore, differences...

Advertisement