loading
IEC PAS 63312 - Technical specification for flame detector system of boiler
January 1, 2021 - IEC

This PAS deals with the general requirements, classification and technical requirements, installation and commissioning requirements, inspection and maintenance requirements, test methods and requirements of radiant energy sensing flame detectors (including IR, UV, visible light, and...

DESC-DWG-89003 - SWITCH, FLAME DETECTOR
September 23, 2013 - DOD
A description is not available for this item.
ASTM E594-96(2026) - Standard Practice for Testing Flame Ionization Detectors Used in Gas or Supercritical Fluid Chromatography
January 1, 2026 - ASTM International

4.1 Although it is possible to observe and measure each of the several characteristics of a detector under different and unique conditions, it is the intent of this recommended practice that a complete set of detector specifications should be obtained at the same operating conditions,...

ASTM E2698-26 - Standard Practice for Radiographic Examination Using Digital Detector Arrays
February 1, 2026 - ASTM International

1.1 This practice covers the minimum requirements for radiographic examination of metallic and nonmetallic materials using digital detector arrays (DDAs). 1.2 The stated requirements of this specification are based on the use of an X-ray generating source. Additionally, some of the tests and...

FMAPPROVAL 6061 - Flame Arresters
December 1, 2013 - FM

This standard specifies the requirements for flame arresters protecting systems containing vapors of flammable or combustible liquids where vapor temperatures do not exceed 60°C. This standard is NOT applicable to the following: • external safety-related measurement and control equipment...

ASTM E840-95(2021)e1 - Standard Practice for Using Flame Photometric Detectors in Gas Chromatography
April 1, 2021 - ASTM International

This practice is intended as a guide for the use of a flame photometric detector (FPD) as the detection component of a gas chromatographic system. The different principles of flame photometric detectors, and detector construction are presented in details. The...

MIL-PRF-32226 - FLAME DETECTOR, ADVANCED FIRE AND SMOKE SENSOR SYSTEM (AFSSS)
October 25, 2006 - NPFC

This specification covers the performance requirements for flame detectors (see 6.8.5), which are components of an overall Advanced Fire and Smoke Sensor System (AFSSS) for use on naval ships. These flame detectors may be of commercial-off-the-shelf (COTS) design, but...

ASTM D5441-21(2025) - Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography
October 1, 2025 - ASTM International

5.1 The presence of impurities in MTBE product can have a deleterious effect upon the value of MTBE as a gasoline additive. Oxygenate and olefin contents are of primary concern. This test method provides a knowledge of the composition of MTBE product. This is useful in the evaluation of process...

UL 525 - Flame Arresters
May 9, 2008 - ULSE

1.1 These requirements cover tank vent deflagration flame arresters and in-line detonation flame arresters. 1.2 The requirements for tank vent deflagration flame arresters cover arresters for use on vents of storage tanks for petroleum oil and gasoline. These flame...

MIL-PRF-32635 - CLOTH, FLAME RESISTANT
October 9, 2019 - NPFC

Scope. This specification covers the requirements for flame resistant (FR) cloth, for use in flame resistant clothing.

MIL-DTL-22612 - DETECTOR, COMBINED CONTAMINATED FUEL
January 29, 2015 - NPFC

This specification establishes the requirements for two types of combined contaminated fuel detectors. This specification is not applicable to any +100 additized petroleum products.

QPL-32489 - PILLOW, FLAME RESISTANT, SHIPBOARD
April 7, 2020 - NPFC

QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATION MIL-PRF-32489 WITH AMENDMENT 1 PILLOW, FLAME RESISTANT, SHIPBOARD

ASTM E2736-17(2022) - Standard Guide for Digital Detector Array Radiography
December 1, 2022 - ASTM International

1.1 This standard is a user guide, which is intended to serve as a tutorial for selection and use of various digital detector array systems nominally composed of the detector array and an imaging system to perform digital radiography. This guide also serves as an in-detail reference...

ASTM D4691-17(2025) - Standard Practice for Measuring Elements in Water by Flame Atomic Absorption Spectrophotometry
July 1, 2025 - ASTM International

1.1 This practice covers general considerations for the quantitative determination of elements in water and waste water by flame atomic absorption spectrophotometry. Flame atomic absorption spectrophotometry is simple, rapid, and applicable to a large number of elements in drinking...

ASTM F1449-20(2026) - Standard Guide for Industrial Laundering Care and Maintenance of Flame Resistant or Arc Rated Clothing
May 1, 2026 - ASTM International

1.1 This guide provides recommendations for the care and maintenance of clothing that is flame resistant or arc rated. 1.2 These recommendations address the industrial laundering process. Industrial laundering is an effective cleaning process for flame resistant or arc rated clothing;...

ASTM F2757-20(2026) - Standard Guide for Home Laundering Care and Maintenance of Flame Resistant or Arc Rated Clothing
May 1, 2026 - ASTM International

1.1 This guide provides recommendations for home laundering of clothing that is flame resistant or arc rated. These recommendations address the home laundering process. Home laundering is an effective cleaning process for flame resistant or arc rated garments; follow all label care...

MIL-DTL-51490 - Detector Kit, Chemical Agent: M256A2
January 10, 2017 - NPFC

This specification covers one type of detector kit used to determine the presence or absence of contamination from nerve, blister, blood, and lewisite chemical warfare agents. The kit includes six individually packaged M256A2 sampler detectors, four packages of Low Volatility Hazard...

ASTM F1939-26 - Standard Test Method for Radiant Heat Resistance of Flame Resistant Clothing Materials with Continuous Heating
June 15, 2026 - ASTM International

1.1 This test method rates the non-steady state thermal resistance or insulating characteristics of flame resistant clothing materials subjected to a continuous, standardized radiant heat exposure. 1.1.1 This test method is not applicable to clothing materials that are not flame...

Flame Retardants for Textile Materials
August 4, 2020 - CRC

This book focuses on flame retardants (FR) for textile materials. It discusses basics of flame retardancy and flammability and covers various types of flame retardants and materials, including natural FRs, halogen, phosphorous, and nanomaterial-based FRs. This book also...

AMS3856B - Cloth, Upholstery, Flame Resistant
June 24, 2016 - SAE International

This specification and its supplementary detail specifications cover flame resistant cloth woven from various fibers.

Advertisement