loading
ASTM C1303/C1303M-23 - Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
November 1, 2023 - ASTM International

5.1 Rigid gas-filled closed-cell foam insulations include all cellular plastic insulations which rely on a blowing agent (or gas), other than air, for thermal resistance values. At the time of manufacture, the cells of the foam usually contain their highest percentage of...

ASTM C1534-26 - Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems
April 1, 2026 - ASTM International

This specification covers the composition, dimensions, and physical properties of flexible unfaced foam sheet, used to insulate interior surfaces of HVAC ducts, plenums and equipment used for the distribution of conditioned air. The flexible polymeric insulations of this specification...

ASTM C1848-17a(2023) - Standard Practice for Installation of High-Pressure Spray Polyurethane Foam Insulation for the Building Enclosure
March 1, 2023 - ASTM International

1.1 This practice covers the installation of high-pressure spray polyurethane foam (SPF) as an insulation for building enclosure assemblies including: walls, ceilings, attics, floors, and crawl spaces. This practice does not apply to SPF used strictly as a component for an air barrier...

ASTM C1303/C1303M-22 - Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
June 1, 2022 - ASTM International

5.1 Rigid gas-filled closed-cell foam insulations include all cellular plastic insulations which rely on a blowing agent (or gas), other than air, for thermal resistance values. At the time of manufacture, the cells of the foam usually contain their highest percentage of...

ASTM D7859-26 - Standard Practice for Spraying, Sampling, Packaging, and Test Specimen Preparation of Spray Polyurethane Foam (SPF) Insulation for Testing of Emissions Using Environmental Chambers
April 1, 2026 - ASTM International

5.1 Manufacturers of SPF insulation may need to test their products for vapor-phase emissions of volatile and semi-volatile organic compounds in order to comply with voluntary standards, purchase specifications, or other requirements. 5.2 Since SPF insulation is formed by chemical...

NEMA LE 7 - Recessed Luminaires Intended for Contact with Expanding Polyurethane Foam Insulation
January 1, 2015 - NEMA

This standard provides requirements and recommendations for Type IC recessed luminaires intended for installation in contact with low density and medium density polyurethane foam thermal insulation

GMKOREA EDS-M-6718 - Sticky Type Urethane Foam Insulation
June 1, 2011 - GMKOREA

Sound absorption/insulation materials used for noise reduction of automobiles. PURPOSE This standard specifies the physical properties and controlling quality of the sound absorption/insulation materials used for automobiles.

ASTM C1303/C1303M - Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
March 1, 2019 - ASTM

This test method covers a procedure for predicting the long-term thermal resistance (LTTR) of unfaced or permeably faced rigid gas-filled closed-cell foam insulations by reducing the specimen thickness to accelerate aging under controlled laboratory conditions (1-5).2 NOTE 1-See...

ASTM C1303/C1303M-19 - Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
March 1, 2019 - ASTM International

5.1 Rigid gas-filled closed-cell foam insulations include all cellular plastic insulations which rely on a blowing agent (or gas), other than air, for thermal resistance values. At the time of manufacture, the cells of the foam usually contain their highest percentage of...

ASTM C1534-24 - Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems
April 15, 2024 - ASTM International

This specification covers the composition, dimensions, and physical properties of flexible unfaced foam sheet, used to insulate interior surfaces of HVAC ducts, plenums and equipment used for the distribution of conditioned air. The flexible polymeric insulations of this specification...

GMKOREA EDS-M-6657 - Polyurethane Foam for Insulation
June 1, 2011 - GMKOREA

For sound absorption and insulation used for the floor panel and inner dash panel of automobiles. PURPOSE This specification specifies the requirements of basic property of the polyurethane foam used for sound absorption and insulation of automobile..

ASTM D8142-23 - Standard Test Method for Determining Chemical Emissions from Spray Polyurethane Foam (SPF) Insulation using Micro-Scale Environmental Test Chambers
September 1, 2023 - ASTM International

6.1 SPF insulation is applied and formed onsite, which creates unique challenges for measuring product emissions. This test method provides a way to measure post-application chemical emissions from SPF insulation. 6.2 This test method can be used to identify compounds that emit from...

ASTM C1848-17a - Standard Practice for Installation of High-Pressure Spray Polyurethane Foam Insulation for the Building Enclosure
September 1, 2017 - ASTM International

1.1 This practice covers the installation of high-pressure spray polyurethane foam (SPF) as an insulation for building enclosure assemblies including: walls, ceilings, attics, floors, and crawl spaces. This practice does not apply to SPF used strictly as a component for an air barrier...

ASTM C1303/C1303M-15 - Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
December 1, 2015 - ASTM International

5.1 Rigid gas-filled closed-cell foam insulations include all cellular plastic insulations which rely on a blowing agent (or gas), other than air, for thermal resistance values. At the time of manufacture, the cells of the foam usually contain their highest percentage of...

ASTM C1848-17 - Standard Practice for Installation of High-Pressure Spray Polyurethane Foam Insulation for the Building Enclosure
February 1, 2017 - ASTM International

1.1 This practice covers the installation of high-pressure spray polyurethane foam (SPF) as an insulation for building enclosure assemblies including: walls, ceilings, attics, floors, and crawl spaces. This practice does not apply to SPF used strictly as a component for an air barrier...

ASTM C1534-22 - Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems
November 1, 2022 - ASTM International

This specification covers the composition, dimensions, and physical properties of flexible unfaced foam sheet, used to insulate interior surfaces of HVAC ducts, plenums and equipment used for the distribution of conditioned air. The flexible polymeric insulations of this specification...

ASTM C1848 - Standard Practice for Installation of High-Pressure Spray Polyurethane Foam Insulation for the Building Enclosure
September 1, 2017 - ASTM

This practice covers the installation of high-pressure spray polyurethane foam (SPF) as an insulation for building enclosure assemblies including: walls, ceilings, attics, floors, and crawl spaces. This practice does not apply to SPF used strictly as a component for an air barrier...

ASTM D6694/D6694M-25 - Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing Systems
December 1, 2025 - ASTM International

1.1 This specification covers a liquid-applied solvent dispersed elastomeric coating used as a roofing membrane for spray polyurethane foam (SPF) insulation whose principal polymer in the dispersion contains more than 95?% silicone. 1.2 This specification does not provide guidance for...

ASTM E1730-19(2025) - Standard Specification for Rigid Foam for Use in Structural Sandwich Panel Cores
August 1, 2025 - ASTM International

This specification covers rigid closed-cell polyurethane and polyisocyanurate thermal insulation foams for application in sandwich structural panel cores used in shelter construction for exposure to specified ambient temperatures. The unfaced foam thermal insulation...

ASTM C1642-20(2024) - Standard Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials
November 1, 2024 - ASTM International

1.1 This practice is intended to determine the air leakage rate of aerosol foam sealants as measured in a standardized jig. This practice provides a procedure for preparing the test apparatus and further describes the application of aerosol foam sealant and other joint fillers to the...

Advertisement