loading
ASTM D6255/D6255M-18(2025) - Standard Specification for Steel or Aluminum Slotted Angle Crates
August 1, 2025 - ASTM International

This specification covers the material and fabrication of new reusable, slotted angle metal crates intended for use as containers for domestic and overseas shipment of lightweight airframe components and lightweight bulky items for domestic or overseas air and surface shipments. This specification...

ASTM E1925-25 - Specification for Engineering and Design Criteria for Rigid Wall Relocatable Structures
August 1, 2025 - ASTM International

This specification covers engineering and design criteria for rigid wall relocatable structures (RWRSs) which shall be used for designing expandable and nonexpendable RWRSs. RWRSs shall be manufactured from recovered materials, wherein intimate contact of dissimilar materials shall not be allowed...

ASTM D5079-25 - Standard Practices for Preserving and Transporting Rock Core Samples
August 1, 2025 - ASTM International

1.1 These practices cover the preservation, transportation, storage, cataloging, retrieval, and post-test disposition of rock core samples obtained for geotechnical site characterization, investigations, explorations, and design purposes including for use in visual classification and laboratory...

ASTM D5331-03(2024) - Standard Test Method for Evaluation of Mechanical Handling of Unitized Loads Secured with Stretch Wrap Films
November 1, 2024 - ASTM International

1.1 This test method covers evaluation and comparison of the ability of unitizing films to survive various methods of mechanical handling. 1.2 The test method described is applicable to common means of material handling, including the following: forklift, push/pull, clamp truck, crane, and...

ASTM D1265-23a - Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method
December 1, 2023 - ASTM International

1.1 This practice covers equipment and procedures for obtaining a representative sample of specification Liquefied Petroleum Gas (LPG), such as specified in Specification D1835, GPA 2140, and comparable international standards. This standard is applicable to flow-through cylinders with two valves...

ASTM D1265-23 - Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method
March 1, 2023 - ASTM International

1.1 This practice covers equipment and procedures for obtaining a representative sample of specification Liquefied Petroleum Gas (LPG), such as specified in Specification D1835, GPA 2140, and comparable international standards. This standard is applicable to flow-through cylinders with two valves...

J3220_202301 - Lithium-Ion Cell Performance Testing
January 13, 2023 - SAE International

This SAE Recommended Practice defines performance and life cycle tests for lithium-ion cells used primarily for propulsion of electric vehicles including battery electric vehicles (BEVs), hybrid electric vehicles (HEVs), and other similar propulsion applications (for example, forklift...

ASTM F3588-22 - Standard Guide for Set of Objects used with A-UGVs
October 1, 2022 - ASTM International

4.1 A-UGVs navigate, dock, or perform other tasks, or combinations thereof, within for example manufacturing, warehouse, hospital, and other environments. Objects (defined in Terminology F3200 as anything in the environment that is not infrastructure) and obstacles (defined in Terminology F3200 as...

ASTM D6849-22 - Standard Practice for Storage and Use of Liquefied Petroleum Gases (LPG) in Sample Cylinders for LPG Test Methods
May 1, 2022 - ASTM International

1.1 This practice covers information for the storage and use of LPG samples in standard cylinders of the type used in sampling method, Practice D1265 and floating piston cylinders used in sampling method, Practice D3700. 1.2 This practice is especially applicable when the LPG sample is used as a...

UL 3100 - Plateformes mobiles automatisées
May 26, 2021 - ULSE

1.1 These requirements cover battery-operated mobile platforms with or without a payload, as specified in 2. These devices are intended to be used indoors only or as outdoor use devices in a commercial or industrial environment. The device is battery powered using either lead acid batteries or...

MIL-PRF-32470 - TRUCK, FORKLIFT, 10,000 LB CAPACITY, VARIABLE REACH, ROUGH TERRAIN
March 31, 2019 - NPFC

This document covers a 10,000 pound rated variable reach, rough terrain forklift truck, henceforth referred to as a 10K Telehandler. The forklift will operate on hard paved surfaces, soft soil, mud, snow, and sand, on level and hilly terrain. This forklift has a minimum forward...

ASTM D6881/D6881M-03(2020) - Standard Classification for Standard Plastics Industry Bulk Box/Pallet Unit Size Classified By Bulk Density
October 1, 2020 - ASTM International

4.1 This standard classification will be used to: 4.1.1 Standardize the package size increasing availability, versatility, and acceptability of bulk box/pallet units. 4.1.2 Lower transport package manufacturing costs. 4.1.3 Lower cost/lb of packaged resin because of higher net weight/package. 4.1.4...

ISO DIS 10218-2 - Robotics — Safety requirements for robot systems in an industrial environment — Part 2: Robot systems, robot applications and robot cells integration
December 11, 2020 - ISO

This document specifies requirements for the integration of industrial robot systems, industrial robot applications and industrial robot cells. The following is addressed: - the design, integration, commissioning, operation, maintenance, decommissioning and disposal of the industrial robot system,...

DS/ISO 25981 - Road vehicles – Connectors for the electrical connection of towing and towed vehicles – Connectors for electronically monitored charging systems with 12 V or 24 V nominal supply voltage
July 13, 2020 - DS

This document specifies dimensional characteristics, contact allocation, tests and requirements of 7-pole connectors for electrical connections of electronically monitored charging systems of towing and towed vehicles. The electronic monitoring system is designed to detect 12 V and 24 V nominal...

ISO 25981 - Road vehicles — Connectors for the electrical connection of towing and towed vehicles — Connectors for electronically monitored charging systems with 12 V or 24 V nominal supply voltage
July 1, 2020 - ISO

This document specifies dimensional characteristics, contact allocation, tests and requirements of 7-pole connectors for electrical connections of electronically monitored charging systems of towing and towed vehicles. The electronic monitoring system is designed to detect 12 V and 24 V nominal...

A-A-58080 - TRUCK, LIFT, FORK, ENGINE-DRIVEN, PNEUMATIC-TIRES 4,000 POUND CAPACITY AT 24 INCH LOAD CENTER
October 21, 2019 - NPFC

Scope. This commercial item description (CID) covers the general requirements for a diesel fueled or liquid petroleum gas (LPG) fueled engine-driven, front wheel drive, rear wheel steer, pneumatic tires, 4,000 pound at 24 inch load center capacity, forklift truck. The forklift truck...

ASTM F3470-20 - Standard Guide for A-UGV Capabilities
August 1, 2020 - ASTM International

5.1 This guide is intended to be used by manufacturers and users of A-UGVs: (1) to fully define capabilities of their A-UGV(s) or (2) to allow the standard requestor to describe the A-UGV capabilities required for the requested A-UGV to align with assigned task(s). A-UGVs that are covered within...

UL 2267 - Standard for Fuel Cell Power Systems for Installation in Industrial Electric Trucks
March 26, 2020 - ULSE

1.1 These requirements cover fuel cell power systems intended to be installed in Type E, Type CGH, Type CGH-EE, Type CHG-ES, or Type CGH-EX industrial trucks used in locations as defined in the Fire Safety Standard for Powered Industrial Trucks Including Type Designations, Areas of Use,...

A-A-58068 - TRUCK, LIFT, FORK, ELECTRIC, SIT DOWN, SOLID TIRES, 6,000 POUND CAPACITY AT 24 INCH LOAD CENTER, 180 INCH MINIMUM LIFT HEIGHT
April 24, 2019 - NPFC

This commercial item description covers the general requirements for an electric, front wheel drive, rear wheel steer, sit down operator, solid tired, 6,000 pound at 24-inch load center capacity, forklift truck. The forklifts are intended for handling cargo in and around warehouses,...

J2799_201912 - Hydrogen Surface Vehicle to Station Communications Hardware and Software
December 13, 2019 - SAE International

This standard specifies the communications hardware and software requirements for fueling hydrogen surface vehicles (HSV), such as fuel cell vehicles, but may also be used where appropriate, with heavy-duty vehicles (e.g., busses) and industrial trucks (e.g., forklifts) with compressed...

Advertisement