INTRODUCTION The Fuel Safety Handbook is intended to provide the basic information which is essential to gas technicians working with natural gas and propane fuel gases in Ontario. The Fuel Safety Handbook is intended to address the knowledge needed by Ontario gas technicians...
Introduction (60 minutes) Using FSW-1, welcome the participants and introduce yourself to the group. Ask the participants to introduce themselves and indicate as to whether they are natural gas or propane fitters. Use the knowledge and skills of your participants as a means of enriching the...
NOTE: This guide specification covers the requirements for factory-fabricated fuel storage tanks. Tanks associated with equipment like generators but not integral to the equipment are also covered by this specification. Generator base tanks or belly tanks...
This specification covers general purpose lock type caps for fuel oil and gasoline storage tanks. Cap shall be of the following types, sizes, and styles, as specified (see 6.2). TYPES Type I - Internal pipe thread for fill-pipe connection. Type II - External pipe thread for...
This specification covers four types of fuel storage tank vent caps with screen covered vent openings. The vent cap fits on the vent pipe by means of a threaded inlet or slip-over inlet. Vent caps covered by this specification shall be of the following types, sizes, and styles...
1.1 This specification covers requirements for liquid energy storage systems-fuel tanks-for light sport category aircraft. 1.2 This specification only addresses liquid energy storage systems that are either vented to the atmosphere or are pressurized to less than one...
5.1 This test method is intended to provide a tool for assessing whether fuel storage and distribution facilities, or end user fuel tanks, are subject to microbial growth, and to alert fuel suppliers or users to the potential for fuel quality or operational...
1.1 This guide covers procedures for establishing a program to monitor the performance of Coating Service Level III lining (and coating) systems in operating nuclear power plants. Monitoring is an ongoing process of evaluating the condition of the in-service lining systems. 1.2 Coating Service...
5.1 This test method is intended to provide a tool for assessing whether fuel storage and distribution facilities or end user fuel tanks are subject to microbial growth and alert fuel suppliers or users to the potential for fuel quality or operational...
1.1 This guide is a framework to facilitate moving petroleum underground storage tank (UST) release sites to closure in a manner protective of human and ecological receptors. Alternative ways to assess and address the potential for exposure to human and ecological receptors resulting...
Narrow Your Results