loading
API REPORT GROUND MOTION - Ground Motion Intensity Factors and Acceleration Response Spectra Ninth Edition API RP 2A Earthquake Design Provisions Eastern Gulf of Alaska Region
November 1, 1978 - API

PERSPECTIVE This report documents a study of earthquake design criteria for the eastern Gulf of Alaska. This study backgrounded a portion of the development of the Ninth Edition of API RP 2A's Section 2.10 earthquake design guideline effective ground acceleration and response spectra. This...

BARC-1274 - A FACSIMILE REPORT
NTIS
A description is not available for this item.
ASTM F432-19(2026) - Standard Specification for Roof and Rock Bolts and Accessories
May 1, 2026 - ASTM International

This specification covers the chemical, mechanical, and dimensional requirements for roof and rock bolts and accessories. Addressed in this specification are double-end threaded and slotted steel bars; fully grouted bolts and threaded bars; mechanical anchorage devices used for point...

ASTM F2063-26 - Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants
June 1, 2026 - ASTM International

This specification covers the chemical, physical, mechanical, and metallurgical requirements for wrought nickel-titanium bar, flat rolled products, and tubing containing nominally 54.5 % to 57.0 % nickel and used for the manufacture of medical devices and surgical implants. The material...

ASTM B348/B348M-25 - Standard Specification for Titanium and Titanium Alloy Bars and Billets
November 1, 2025 - ASTM International

This specification covers annealed bars and grills made from titanium or its alloys. All material grades covered should conform to the required chemical composition requirements. Elements that are intentionally added to the melt should be identified, analyzed and reported in the chemical...

ASTM C1567-25 - Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)
April 1, 2025 - ASTM International

1.1 This test method permits detection within 16 days of the potential for deleterious alkali-silica reaction of combinations of cementitious materials and aggregate in mortar bars. The cementitious materials are composed of various proportions of hydraulic cement, pozzolans, and slag cement...

ASTM F2581-25 - Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225)
January 15, 2025 - ASTM International

1.1 This specification covers the chemical, mechanical, and metallurgical requirements for wrought nitrogen strengthened 11manganese-17chromium-3molybdenum low-nickel stainless steel alloy bar and wire for surgical implants. 1.2 The values stated in either SI units or inch-pound units are to...

ASTM F90-24 - Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605)
October 15, 2024 - ASTM International

1.1 This specification covers the chemical, mechanical, and metallurgical requirements for wrought cobalt-20chromium-15tungsten-10nickel alloy used for surgical implants. The properties specified apply specifically to wrought bar, rod, wire, sheet, and strip, but do not apply to surgical...

DS/EN 2036 - Aerospace series – Round steel bars ground – Dimensions – Tolerance h 8
August 7, 2017 - DS

This European Standard specifies the dimensions, tolerances and physical constants of ground round steel bars used in aerospace construction.

ASTM A125-24 - Standard Specification for Steel Springs, Helical, Heat-Treated
October 15, 2024 - ASTM International

This specification covers the standard for hot-coiled, heat-treated helical compression springs with tapered, closed, squared and ground ends made of hot-wrought round steel bars. Cross sections for hot-wrought round, square, and round-cornered square bars of steel of the...

ASTM F67-24 - Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700)
December 1, 2024 - ASTM International

1.1 This specification covers the chemical, mechanical, and metallurgical requirements for four grades of unalloyed titanium strip, sheet, plate, bar, billet, forging, and wire used for the manufacture of surgical implants. 1.2 The values stated in either SI units or inch-pound units are to...

ASTM C1858/C1858M-24 - Standard Practice for Design, Construction, and Material Requirements for Direct Hung Suspended T-bar Type Ceiling Systems Intended to Receive Gypsum Panel Products in Areas Subject to Earthquake Ground Motions
May 1, 2024 - ASTM International

1.1 This practice covers the installation requirements of direct hung suspended t-bar type ceiling systems intended to receive gypsum panel products constructed as flat, single level, surrounded on all sides by a wall, bulk head, or soffit braced to the building structure to resist the...

ASTM A108-24 - Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
March 1, 2024 - ASTM International

1.1 This specification covers cold-finished carbon and alloy steel bars produced in straight length and coil. Cold-finished bars are suitable for heat treatment, for machining into components, or for use in the as-finished condition as shafting, or in constructional applications, or...

ASTM E2091-24 - Standard Guide for Use of Activity and Use Limitations, Including Institutional and Engineering Controls
August 1, 2024 - ASTM International

4.1 Activity and use limitations are typically used in conjunction with risk-based decision-making principles in Federal, state, tribal, and local remediation programs, or where residual chemicals of concern remain following an evaluation of risk or following the implementation of a remedial action...

ASTM B574-23 - Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod and Bar
November 1, 2023 - ASTM International

1.1 This specification2 covers rod and bar of low-carbon nickel-chromium-molybdenum alloys (UNS N10276, N06022, N06035, N06044, N06455, N06058, and N06059), low-carbon nickel-molybdenum-chromium (USN N10362), low-carbon nickel-molybdenum-chromium-tantalum (UNS N06210), low-carbon...

ASTM F2384-24 - Standard Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901)
May 1, 2024 - ASTM International

This specification covers the requirements fro wrought zirconium-2.5niobium alloy for use in surgical implant applications. The material shall be manufactured into bars or wires by multiple vacuum melting in arc furnaces, by electron beam melting, or by other melting processes conventionally...

J3130_202312 - Laboratory Measurement of Vibration Damping Properties Using Mechanical Impedance Method at the Center of a Bar
December 20, 2023 - SAE International

This SAE Recommended Practice describes a laboratory test procedure for measuring the composite loss factor and bending stiffness properties of a system consisting of a damping material bonded to a vibrating bar which is excited at the center. The bar could be a steel, aluminum,...

ASTM F1295-24 - Standard Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700)
March 15, 2024 - ASTM International

1.1 This specification covers the chemical, mechanical, and metallurgical requirements for wrought annealed, cold-worked, or hot-worked titanium-6aluminum-7niobium alloy bar, wire, sheet, strip, and plate to be used in the manufacture of surgical implants (1-7).2 1.2 The SI units in this...

Advertisement