loading
NSF INSTALLATION MANUAL - Installation Manual for Food Service Equipment
July 1, 1968 - NSF
A description is not available for this item.
ANSI A108.10 - INSTALLATION OF GROUT IN TILEWORK
TCNA
A description is not available for this item.
PIP STS03600 - Nonshrink Cementitious Grout Specification
July 1, 2008 - PIP

This Practice describes the requirements for supplying, testing, and installing "nonshrink" cementitious grout materials. Purpose This Practice provides the requirements for "non-shrink" cementitious grout materials and installation.

PIP STS03601 - Epoxy Grout Specification
December 1, 2010 - PIP

This Practice describes the requirements for supplying, testing, and installing epoxy grout materials for machinery baseplates and soleplates. Users of this Practice may also refer to PIP REIE686 for more detailed guidelines for machinery installation and grouting. Purpose This...

ANSI A118.7 - HIGH PERFORMANCE CEMENT GROUTS FOR TILE INSTALLATION
TCNA
A description is not available for this item.
ACI 351.5M - Specification for Installation of Epoxy Grout between Foundations and Equipment Bases
September 1, 2015 - ACI

This specification covers requirements for installation of epoxy grout between foundations and bases of equipment and machinery. Included are requirements for materials, placement, and quality control. This specification supplements the Contract Documents and provides requirements for...

ASTM C1943-24 - Standard Test Method for Grout Retention Properties of Ceramic Tile
February 1, 2024 - ASTM International

4.1 This test method provides a means for testing combinations of tile, grout, installation materials and installation practices to determine grout retention behavior. This method can be used by installers to determine if installation materials and techniques are...

ACI 351.5 - Specification for Installation of Epoxy Grout between Foundations and Equipment Bases
May 1, 2015 - ACI

This specification covers requirements for installation of epoxy grout between foundations and bases of equipment and machinery. Included are requirements for materials, placement, and quality control. This specification supplements the Contract Documents and provides requirements for...

ANSI A118.5 - CHEMICAL RESISTANT FURAN MORTARS AND GROUTS FOR TILE INSTALLATION
TCNA
A description is not available for this item.
DS/EN 13888 - Grout for tiles - Requirements, evaluation of conformity, classification and designation
June 10, 2009 - DS

This European Standard applies to ceramic tile grouts for internal and external tile installations on walls and floors. This standard gives the terminology concerning the products, working methods, application properties, etc., for ceramic tile grouts. This European Standard...

ASTM D8109-25 - Standard Guide for Waterproofing Repair of Concrete by Chemical Grout Crack Injection
December 1, 2025 - ASTM International

1.1 This guide describes the selection of materials, installation methods, and inspection required for sealing leaks at cracks in concrete building walls and slabs using chemical grout. The process discussed in this guide is a waterproofing repair in which voids in a concrete element...

ASTM D8109-17(2024) - Standard Guide for Waterproofing Repair of Concrete by Chemical Grout Crack Injection
January 1, 2024 - ASTM International

1.1 This guide describes the selection of materials, installation methods, and inspection required for sealing leaks at cracks in concrete building walls and slabs using chemical grout. The process discussed in this guide is a waterproofing repair in which voids in a concrete element...

ASTM D8109-17 - Standard Guide for Waterproofing Repair of Concrete by Chemical Grout Crack Injection
December 1, 2017 - ASTM International

1.1 This guide describes the selection of materials, installation methods, and inspection required for sealing leaks at cracks in concrete building walls and slabs using chemical grout. The process discussed in this guide is a waterproofing repair in which voids in a concrete element...

ASTM F1698-02(2015) - Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits
March 1, 2015 - ASTM International

1.1 This practice describes the procedures for the rehabilitation of sewer lines and conduits by the installation of a field-fabricated PVC liner. After installation of the liner, cementitious grout is injected into the annular space between the liner and the existing sewer or...

ASTM F1698-02(2008) - Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits
March 1, 2008 - ASTM International

1.1 This practice describes the procedures for the rehabilitation of sewer lines and conduits by the installation of a field-fabricated PVC liner. After installation of the liner, cementitious grout is injected into the annular space between the liner and the existing sewer or...

ASTM F1698-02 - Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits
September 10, 2002 - ASTM International

1.1 This practice describes the procedures for the rehabilitation of sewer lines and conduits by the installation of a field-fabricated PVC liner. After installation of the liner, cementitious grout is injected into the annular space between the liner and the existing sewer or...

ASTM F1698-96 - Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits
January 1, 1996 - ASTM International

1.1 This practice describes the procedures for the rehabilitation of sewer lines and conduits by the installation of a field-fabricated PVC liner. After installation of the liner, cementitious grout is injected into the annular space between the liner and the existing sewer or...

ASTM F2414-04(2023) - Standard Practice for Sealing Sewer Manholes Using Chemical Grouting
July 1, 2023 - ASTM International

1.1 This practice covers proposed selection of materials, installation techniques, and inspection required for sealing manholes using chemical grout. Manholes or sections of manholes with active leaks shall be repaired. Manholes to be grouted are of brick, block, cast-in-place...

ASTM F1698-21 - Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits
July 1, 2021 - ASTM International

1.1 This practice describes the procedures for the rehabilitation of sewer lines and conduits by the installation of a field-fabricated PVC liner. After installation of the liner, cementitious grout is injected into the annular space between the liner and the existing sewer or...

Advertisement