loading
CSA Z94.2 - Hearing protection devices — Performance, selection, care, and use
January 1, 2014 - CSA

Clauses 4 to 7 cover performance, acoustical testing, and packaging requirements for personal hearing protection devices (HPDs). Clauses 8 to 12 cover the selection, care, and use of HPDs, which will contribute to an effective hearing loss prevention program. The following...

A-A-53127 - PLUGS, EAR (HEARING PROTECTION, CYLINDRICAL)
NPFC
A description is not available for this item.
DEF STAN 00-27 - The Measurement of Impulse Noise from Military Weapons, Explosives and Pyrotechnics; and Selection of Hearing Protection
May 27, 2015 - MODUK

The purpose of this Standard is to provide guidance on the measurement of impulse noise from MWEP and selection of hearing protection to demonstrate compliance with the requirements of CNAWR/CNAW(NI)R/MSFV(CNAW)R. This Standard may be used by a MOD Tasking Authority in contracts and...

A-A-54891 - PLUG, EAR, HEARING PROTECTION, TRIPLE FLANGE
July 16, 1993 - NPFC

The General Services Administration has authorized the use of this Commercial Item Description as a replacement for Military Specification MIL-P-36714B, which is cancelled. This Commercial Item Description covers the requirements for triple flange ear plugs suitable for attenuating high intensity...

MIL-P-37055 - PLUG, EAR, HEARING PROTECTION, CYLINDRICAL, SILICONE BASE
NPFC
A description is not available for this item.
ASTM F3032-26 - Standard Specification for Clothing for Protection Against Radiological Contamination
February 1, 2026 - ASTM International

1.1 This specification establishes minimum design, performance, labeling, and documentation criteria for protective ensembles, protective garments, protective gloves, protective footwear, and protective hoods for use at facilities with radioactive material contamination and certain radioactive...

ASTM F3032-25 - Standard Specification for Clothing for Protection Against Radiological Contamination
July 1, 2025 - ASTM International

1.1 This specification establishes minimum design, performance, labeling, and documentation criteria for protective ensembles, protective garments, protective gloves, protective footwear, and protective hoods for use at facilities with radioactive material contamination and certain radioactive...

ASTM E2202-23 - Standard Practice for Measurement of Equipment-Generated Continuous Noise for Assessment of Health Hazards
November 1, 2023 - ASTM International

1.1 This standard defines noise measurement procedures for estimating the risk of hearing loss among users of noise producing equipment. It is applicable to ground vehicles, aircraft, watercraft, and other mobile, transportable, or stationary equipment. 1.2 This standard does not recommend...

A-A-54890 - PLUG, EAR, HEARING PROTECTION, UNIVERSAL SIZE, WITH HEADBAND
NPFC
A description is not available for this item.
A-A-54878 - PLUG, EAR, HEARING PROTECTION, UNIVERSAL SIZE, VINYL FOAM
NPFC
A description is not available for this item.
MIL-P-37564 - PLUGS, EAR, HEARING PROTECTION, UNIVERSAL SIZE, WITH HEADBAND
NPFC
A description is not available for this item.
ASSP FALL PROTECTION - Z359 Fall Protection & Arrest Standards Package
January 1, 2017 - ASSP
A description is not available for this item.
ANSI/ASA S12.42 - American National Standard Methods for the Measurement of Insertion Loss of Hearing Protection Devices in Continuous or Impulsive Noise Using Microphone-in-Real-Ear or Acoustic Test Fixture Procedures
January 11, 2010 - ASA

This standard provides methods for the measurement of the insertion loss of hearing protection devices in specified continuous and impulsive noise environments. The microphone-in-real-ear (MIRE) method utilizes human test subjects and may be used for hearing protectors that...

DS/EN 352-3 - Hearing protectors – General requirements – Part 3: Earmuffs attached to head protection and/or face protection devices
November 23, 2020 - DS

This document specifies requirements for construction, design, performance, marking and user information for earmuffs attached to head protection and/or face protection devices, hereinafter referred to as 'mounted earmuffs'. In particular, it specifies requirements regarding the sound...

ASTM F1166-23 - Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities
January 1, 2023 - ASTM International

1.1 This practice provides ergonomic design criteria from a human-machine perspective for the design and construction of maritime vessels and structures and for equipment, systems, and subsystems contained therein, including vendor-purchased hardware and software. 1.1.1 The focus of these design...

AIHA NOISE & HEARING - THE NOISE MANUAL
AIHA
A description is not available for this item.
ASTM F1166-22 - Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities
September 1, 2022 - ASTM International

1.1 This practice provides ergonomic design criteria from a human-machine perspective for the design and construction of maritime vessels and structures and for equipment, systems, and subsystems contained therein, including vendor-purchased hardware and software. 1.1.1 The focus of these design...

Advertisement