loading
HUMAN-MACHINE INTERFACE D - Human-Machine Interface Design for Process Control Applications
January 1, 2009 - ISA
A description is not available for this item.
NEMA USER GUIDE - USER GUIDE TO PRODUCT SPECIFICATIONS FOR ELECTRICAL BUILDING WIRE AND CABLE
January 1, 2005 - NEMA

USER GUIDE TO PRODUCT SPECIFICATIONS FOR ELECTRICAL BUILDING WIRE AND CABLE This Guide is published by the Building Wire and Cable Section of the National Electrical Manufacturers Association to assist users of commonly utilized electrical building wire and cable on the proper...

API HUMAN FACTORS 2006 - Human Factors Tool for Existing Operations
February 1, 2006 - API

Objectives and Scope The objectives of this tool include: • Providing a tool for operating crews to identify opportunities for latent conditions and human error: and • Improving how Process Hazards Analysis/Hazard Evaluation/Revalidation processes address human factors. The scope of...

API HUMAN FACTORS 2005 - Human Factors in New Facility Design Tool
October 1, 2005 - API

This document focuses only on equipment design. Items such as human error, behavior-based safety, and operating procedure issues are not in the scope. The Tool covers equipment that is common to both upstream producing and downstream manufacturing operations. Equipment associated with...

DIN MACHINERY SAFETY - DIN MACHINERY SAFETY - 3 VOLUME SET
DIN
A description is not available for this item.
DIN MACHINERY SAFETY CD - DIN MACHINERY SAFETY ON CD-ROM
DIN
A description is not available for this item.
FORD MACHINERY/EQUIPMENT - MACHINERY & EQUIPMENT GUIDELINES
FORD
A description is not available for this item.
MACHINERY'S - MACHINERY'S HANDBOOK
HI/HYDRAUL
A description is not available for this item.
ASTM F1671/F1671M-26 - Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System
July 1, 2026 - ASTM International

5.1 This test method is based on Test Method F903 for measuring resistance of chemical protective clothing materials to penetration by liquids. This test method is normally used to evaluate specimens from individual finished items of protective clothing and individual samples of materials that are...

ASTM F1408-20a(2026) - Standard Practice for Subcutaneous Screening Test for Implant Materials
April 15, 2026 - ASTM International

4.1 This practice is a guideline for a short-term screening test for the evaluation of the tissue response to materials that may be selected for implantation in the human body and should be done in accordance with good laboratory practices. This test may be performed prior to long-term...

ASTM E3524/E3524M-26 - Standard Test Methods for Evaluating Ground Response Robot Capabilities: Dexterity: Rotate
April 15, 2026 - ASTM International

5.1 These test methods are part of an overall suite of related test methods that provide repeatable measures of human-system interaction capability including robotic system mobility, dexterity, inspection, remote operator proficiency, and situational awareness. In particular, the operator...

ASTM F3201-26 - Standard Practice for Ensuring Dependability of Software Used in Unmanned Aircraft Systems (UAS)
May 1, 2026 - ASTM International

1.1 This practice covers software development, validation and verification practices for software that is part of an unmanned aircraft system (UAS), including its associated elements. It may also be used by third-party service providers, including UAS Traffic Management (UTM) service providers. 1.1...

ASTM E3140-25 - Standard Guide for Asset Management Career Development, Education, and Training
December 1, 2025 - ASTM International

1.1 This guide provides the principles for an asset management career development program including education and training for professional employees engaged in the practice of asset management. 1.2 As a guide, this is the consensus of the asset management profession for the requirements for an...

ASTM E3408/E3408M-25a - Standard Test Methods for Evaluating Ground Response Robot Capabilities: Dexterity: Inspect
November 1, 2025 - ASTM International

5.1 These test methods are part of an overall suite of related test methods that provide repeatable measures of human-system interaction capability including robotic system mobility, dexterity, inspection, remote operator proficiency, and situational awareness. In particular, the operator...

ASTM E492-25 - Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine
August 15, 2025 - ASTM International

1.1 This test method covers the laboratory measurement of impact sound transmission of floor-ceiling assemblies using a standardized tapping machine. It is assumed that the test specimen constitutes the primary sound transmission path into a receiving room located directly below and that a...

ASTM F1670/F1670M-25 - Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood
December 1, 2025 - ASTM International

5.1 This test method is based on Test Method F903 for measuring resistance of chemical protective clothing materials to penetration by liquids. This test method is normally used to evaluate specimens from individual finished items of protective clothing and individual samples of materials that are...

ASTM E1007-25 - Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures
August 1, 2025 - ASTM International

1.1 This test method covers the measurement of the transmission of impact sound generated by a standard tapping machine through floor-ceiling assemblies and associated supporting structures in field situations. 1.2 Results are measurable for all types of floor-ceiling assemblies, including...

ASTM F3794-25 - Standard Practice for Multivariate Fit and Accommodation for Exoskeleton Manufacturers and Designers
November 1, 2025 - ASTM International

5.1 The U.S. exoskeleton marketplace currently lacks a consistent sizing structure and clear criteria for selecting sizes. This inconsistency likely stems from the absence of comprehensive national anthropometric data tailored to exoskeleton design applications. The significant variations in sizing...

ASTM F3427-25 - Standard Practice for Documenting Environmental Conditions for Utilization with Exoskeleton Test Methods
November 1, 2025 - ASTM International

4.1 This section provides a description of the environmental conditions listed in Section 1 and describes the sub-conditions within each condition. Examples provided for many of the conditions and sub-conditions are provided as guidance only. Each of the conditions described should be evaluated and...

ASTM D2047-25 - Standard Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine
May 1, 2025 - ASTM International

1.1 This laboratory test method covers the use of the James Machine for the measurement of the static coefficient of friction of polish-coated flooring surfaces with respect to human locomotion safety. Further, this test method also establishes a compliance criterion to meet the...

Advertisement