loading
API GASOLINE MARKETING - Gasoline Marketing in the 1980s: Structure, Practices, and Public Policy
May 1, 1988 - API

Introduction and Summary Gasoline marketing in this country has undergone significant changes in the last 15 years. In response to these changes, some dealers and other market participants have called for the enactment of divorcement and open supply legislation at both the state and federal levels....

API GASOLINE - GASOLINE
January 1, 1972 - API
A description is not available for this item.
API GASOLINE DISTRIBUTION - API GASOLINE DISTRIBUTION STAGE I MACT WORKSHOP
API
A description is not available for this item.
SEMI GASES - GASES
SEMI
A description is not available for this item.
J322_202209 - Nonmetallic Trim Materials—Test Method for Determining the Staining Resistance to Hydrogen Sulfide Gas
September 14, 2022 - SAE International

This SAE Recommended Practice is designed to reveal discoloration which may occur when nonmetallic materials used for trimming automobiles are exposed for a limited time to an atmosphere containing hydrogen sulfide.

ASTM UOP9-85 - Hydrogen Sulfide in Gases by the Tutwiler Method
July 24, 2002 - ASTM International

This method is for determining hydrogen sulfide in gas mixtures. Mercaptan sulfur and carbonyl sulfide, if present, are determined as hydrogen sulfide. The accuracy of this method is not sufficient to obtain reliable results below 5 grains of H2S per 100 cu...

ASTM D4810-20 - Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
December 15, 2020 - ASTM International

5.1 The measurement of hydrogen sulfide in natural gas is important because of gas quality specifications, the corrosive nature of H2S on pipeline materials, and the effects of H2S on utilization equipment. 5.2 This test method provides inexpensive field screening of...

ASTM D2420-23 - Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)
March 1, 2023 - ASTM International

1.1 This test method2 covers the detection of hydrogen sulfide in liquefied petroleum (LP) gases. The sensitivity of the test is about 4?mg/m3 (0.15 to 0.2 grain of hydrogen sulfide per 100?ft3) of gas. 1.2 The values stated in SI units are to be regarded...

ASTM D4810 - Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
December 15, 2020 - ASTM

This test method covers a procedure for a rapid and simple field determination of hydrogen sulfide in natural gas pipelines. Available detector tubes provide a total measuring range of 0.5 ppm by volume up to 40 % by volume, although the majority of applications will be on the...

ASTM C777-04(2025) - Standard Test Method for Sulfide Resistance of Ceramic Decorations on Glass
July 1, 2025 - ASTM International

1.1 This test method covers the qualitative determination of the sulfide resistance of ceramic decorations on glass to assure the necessary durability of the decoration. 1.2 This test method provides an indication of performance when and if the decorations are exposed to sulfide...

ASTM D1945-25 - Standard Test Method for Analysis of Natural Gas by Gas Chromatography
August 1, 2025 - ASTM International

1.1 This test method covers the determination of the chemical composition of natural gases and similar gaseous mixtures containing the following components: hydrocarbons, helium, hydrogen, oxygen, nitrogen, carbon dioxide, and hydrogen sulfide by gas...

ASTM E800-26 - Standard Guide for Measurement of Gases Present or Generated During Fires
June 1, 2026 - ASTM International

1.1 Analytical methods for the measurement of carbon monoxide, carbon dioxide, oxygen, nitrogen oxides, sulfur oxides, carbonyl sulfide, hydrogen halides, hydrogen cyanide, aldehydes, and hydrocarbons are described, along with sampling considerations. Many of these gases...

ASTM D8236-26 - Standard Practice for Preparing an Equilibrium Liquid/Vapor Sample of Live Crude Oil, Condensates, or Liquid Petroleum Products Using a Manual Piston Cylinder for Subsequent Liquid Analysis or Gas Analysis
May 1, 2026 - ASTM International

5.1 This practice allows for compositional analysis of the gases in equilibrium with crude oil, condensate, and liquid petroleum products at a 4:1 vapor/liquid ratio at ambient temperature for analysis using typical instrumentation (RGA) already available in typical refinery laboratories....

ASTM D7237-18(2026) - Standard Test Method for Free Cyanide and Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
July 15, 2026 - ASTM International

5.1 Cyanide and hydrogen cyanide are highly toxic. Regulations have been established to require the monitoring of cyanide in industrial and domestic wastes and surface waters. 5.2 It is useful to determine the aquatic free cyanide to establish an index of toxicity when a wastewater is...

JIS K 0108 - Methods for determination of hydrogen sulfide in flue gas
May 20, 2010 - JSA

This Japanese Industrial Standard specifies the methods for determination of hydrogen sulfide in flue gas which is generated by combustion or chemical reaction or the like, and exhausted into flue, chimney, duct, etc. Warning: Persons performing analysis based on this Standard...

ASTM D4810-06(2015) - Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
November 1, 2015 - ASTM International

4.1 The measurement of hydrogen sulfide in natural gas is important because of the gas quality specifications, the corrosive nature of H2S on pipeline materials, and the effects of H2S on utilization equipment. 4.2 This test method provides inexpensive field screening of...

ASTM D8536-25 - Standard Test Method for Available Sulfide in Water by Gas Extraction
May 1, 2025 - ASTM International

5.1 Sulfide ion is found in groundwaters and wastewater causing odor and corrosion problems. The different forms of sulfides (soluble, insoluble, and gaseous sulfides in water) depend on the pH of the water constitution. The variation in the composition can increase or decrease...

ASTM D8384-25 - Standard Practice for Extraction of Water-Soluble Amines from Crude Oils
July 1, 2025 - ASTM International

5.1 Amine-based scavengers are commonly used to abate sour gas from hydrocarbon streams via a stoichiometric reaction with hydrogen sulfide. Some of these amines can contribute to downstream amine-chloride corrosion and fouling of crude oil fractionation towers and overhead...

Advertisement