loading
NEMA INDUSTRIAL - NEMA 1991 INDUSTRIAL AUTOMATION INVESTMENT PROFILE
NEMA
A description is not available for this item.
ISA INDUSTRIAL NETWORK SE - Industrial Network Security
January 1, 2010 - ISA

Nowadays one only needs to read the newspaper headlines to appreciate the importance of Industrial Network Security. Almost daily an article comes out describing the threat to our critical infrastructure, from spies in our electrical grid to the looming threat of cyberwar.Whether we talk...

NLB INDUSTRIAL LIGHTING - INDUSTRIAL LIGHTING HANDBOOK
NLB
A description is not available for this item.
NEMA INDUSTRIAL LIGHTING - INDUSTRIAL LIGHTING HANDBOOK
NEMA
A description is not available for this item.
IEEE INDUSTRIAL ELEC HDBK - THE INDUSTRIAL ELECTRONICS HANDBOOK
IEEE
A description is not available for this item.
TIA INDUSTRIAL FACTORY - TIA INDUSTRIAL FACTORY SET OF 7 TIA STANDARDS. *** YOU SAVE 40% WHEN PURCHASING AS A SET ***
TIA

This focused set of TIA Standards enables the planning and installation of a structured data/phone cabling system for industrial facilities and those parts of networks in industrial spaces. Supporting Standards for pathways & spaces, administration, bonding & grounding, outside plant...

PIPELINE SAFETY - PIPELINE SAFETY REGULATIONS
DOT
A description is not available for this item.
HI PIPE FRICTION MANUAL - HI PIPE FRICTION MANUAL
HI/HYDRAUL
A description is not available for this item.
ASTM D3754-24 - Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
August 1, 2024 - ASTM International

1.1 This specification covers machine-made fiberglass pipe, 8 in. (200 mm) through 156 in. (4000 mm), for use in pressure systems for conveying sanitary sewage, storm water, and many industrial wastes, and corrosive fluids. Both glass-fiber-reinforced thermosetting-resin pipe...

ASTM D3262-26 - Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
July 1, 2026 - ASTM International

1.1 This specification covers machine-made fiberglass pipe intended for use in gravity-flow systems for conveying sanitary sewage, storm water, and some industrial wastes. Both glass-fiber-reinforced thermosetting-resin pipe (RTRP) and glass-fiber-reinforced polymer mortar...

ASTM D8655-26 - Standard Classification System for Cell Classification of Pre- and Post-Consumer Recycled Rigid Poly(Vinyl Chloride)(PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Materials
April 15, 2026 - ASTM International

1.1 This classification covers rigid Poly(Vinyl Chloride)(PVC), Chlorinated Poly(Vinyl Chloride)(CPVC), copolymers, blends and alloys, and composite materials derived from recyclate from extruded, molded or calendared forms or operations and composed of polyvinyl chloride, chlorinated polyvinyl...

ASTM E1419/E1419M-26 - Standard Practice for Examination of Seamless, Gas-Filled, Pressure Vessels Using Acoustic Emission
May 1, 2026 - ASTM International

1.1 This practice provides guidelines for acoustic emission (AE) examinations of seamless pressure vessels (tubes) of the type used for distribution or storage of industrial gases. 1.2 This practice requires pressurization to a level greater than normal use. Pressurization medium may be gas...

ASTM A760/A760M-25 - Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
October 1, 2025 - ASTM International

1.1 This specification covers corrugated steel pipe intended for use for storm water drainage, underdrains, the construction of culverts, and similar uses. Pipe covered by this specification is not normally used for the conveyance of sanitary or industrial wastes. The steel...

ASTM F2306/F2306M-25a - Standard Specification for 300 mm to 1500 mm [12 in. to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Non-Pressure Gravity-Flow Storm Sewer and Subsurface Drainage Applications
December 1, 2025 - ASTM International

This specification covers requirements and test methods for annular, corrugated profile wall polyethylene pipe and fittings with an interior liner. The pipe and blow-molded fittings shall be made of virgin PE plastic compound having a cell classification 435400C or 435400 and its...

Advertisement