loading
Fundamentals of Infrared Detector Materials
January 1, 2009 - SPIE

The choice of available infrared (IR) detectors for insertion into modern IR systems is both large and confusing. The purpose of this volume is to provide a technical database from which rational IR detector selection criteria evolve, and thus clarify the options open to the...

Infrared and Terahertz Detectors
December 26, 2018 - CRC

This new edition of Infrared and Terahertz Detectors provides a comprehensive overview of infrared and terahertz detector technology, from fundamental science to materials and fabrication techniques. It contains a complete overhaul of the contents including several new...

Infrared Spectroscopy
January 30, 2018 - CRC

It is estimated that there are about 10 million organic chemicals known, and about 100,000 new organic compounds are produced each year. Some of these new chemicals are made in the laboratory and some are isolated from natural products. The structural determination of these compounds is the job of...

ASTM F2476-24 - Standard Test Method for the Determination of Carbon Dioxide Gas Transmission Rate (CO 2 TR) Through Barrier Materials Using an Infrared Detector
December 15, 2024 - ASTM International

5.1 Carbon dioxide gas transmission rate (CO2TR) is an important determinant of the packaging protection afforded by barrier materials. It is not, however, the sole determinant, and additional tests, based on experience, must be used to correlate packaging performance with CO2TR. It is suitable as...

J359_201801 - Infrared Testing
January 9, 2018 - SAE International

The scope of this SAE Information Report is to provide general information relative to the nature and use of infrared techniques for nondestructive testing. The document is not intended to provide detailed technical information, but will serve as an introduction to the theory and...

2D Materials for Infrared and Terahertz Detectors
October 26, 2020 - CRC

2D Materials for Infrared and Terahertz Detectors provides an overview of the performance of emerging detector materials, while also offering, for the first time, a comparison with traditional materials used in the fabrication of infrared and terahertz detectors....

ASTM E2937-26 - Standard Guide for Using Infrared Spectroscopy in Forensic Paint Examinations
May 15, 2026 - ASTM International

1.1 Infrared (IR) spectroscopy is a valuable method for the identification and comparison of paints and coatings (1-11). This guide provides basic recommendations and information about infrared spectrometers and accessories, with an emphasis on sampling techniques specific to paint...

ASTM E1655-17(2024) - Standard Practices for Infrared Multivariate Quantitative Analysis
November 1, 2024 - ASTM International

1.1 These practices cover a guide for the multivariate calibration of infrared spectrometers used in determining the physical or chemical characteristics of materials. These practices are applicable to analyses conducted in the near infrared (NIR) spectral region (roughly 780?nm to...

ASTM E2847-21(2026) - Standard Test Method for ? ?Calibration and Accuracy Verification of Wideband Infrared Thermometers
April 1, 2026 - ASTM International

5.1 This test method provides guidelines and basic test methods for the accuracy verification of infrared thermometers. It includes test set-up and calculation of uncertainties. It is intended to provide the user with a consistent method, while remaining flexible in the choice of calibration...

ASTM E1790-04(2024) - Standard Practice for Near Infrared Qualitative Analysis
November 1, 2024 - ASTM International

1.1 This practice covers the use of near-infrared (NIR) spectroscopy for the qualitative analysis of liquids and solids. The practice is written under the assumption that most NIR qualitative analyses will be performed with instruments designed specifically for this region and equipped with...

ASTM E2698-26 - Standard Practice for Radiographic Examination Using Digital Detector Arrays
February 1, 2026 - ASTM International

1.1 This practice covers the minimum requirements for radiographic examination of metallic and nonmetallic materials using digital detector arrays (DDAs). 1.2 The stated requirements of this specification are based on the use of an X-ray generating source. Additionally, some of the tests and...

State-of-the-Art Infrared Detector Technology
January 1, 2014 - SPIE

Scientists, engineers, managers, and policy makers who are currently involved in the funding of infrared R&D and subsequent system design and manufacture are confronted with a choice between two competing materials technologies, HgCdTe and III-V alloys. This book examines both the current...

Long Wavelength Infrared Detectors Volume 1
March 9, 2020 - CRC

This timely work presents a comprehensive overview of the development of new generations of infrared detectors based on artificially synthesized quantum structures. The growth of quantum wells and superlattices is well documents in this volume, as are the principal new superlattice...

ASTM D2702-05(2025) - Standard Practice for Rubber Chemicals—Determination of Infrared Absorption Characteristics
September 1, 2025 - ASTM International

1.1 This practice covers a simple, rapid practice to prove the identity of a rubber chemical before incorporation into a rubber mix by comparison of its infrared absorption spectrum with that of a reference specimen. 1.2 This technique can also be used to detect gross contamination or large...

ASTM E3085-26 - Standard Guide for Fourier Transform Infrared Spectroscopy in Forensic Tape Examinations
May 15, 2026 - ASTM International

1.1 Infrared spectroscopy (IR) is a valuable method for the identification and comparison of pressure sensitive tapes (1-23). This guide covers basic recommendations and information about IR spectrometers and accessories, with an emphasis on sampling techniques specific to pressure sensitive...

ASTM E3085-26e1 - Standard Guide for Fourier Transform Infrared Spectroscopy in Forensic Tape Examinations
May 15, 2026 - ASTM International

1.1 Infrared spectroscopy (IR) is a valuable method for the identification and comparison of pressure sensitive tapes (1-23). This guide covers basic recommendations and information about IR spectrometers and accessories, with an emphasis on sampling techniques specific to pressure sensitive...

Field Guide to Infrared Systems, Detectors, and FPAs
January 1, 2018 - SPIE

This third edition of the Field Guide to Infrared Systems, Detectors, and FPAs is devoted to fundamental background issues for optical detection processes. It compares the characteristics of cooled and uncooled detectors with an emphasis on spectral and blackbody responsivity,...

ASTM E3216-26 - Standard Guide for Use of Infrared Thermography in Evaluation of Buildings, Building Systems, and Equipment
January 1, 2026 - ASTM International

1.1 This guide covers basic standards and procedures for the use of infrared thermography in evaluation of buildings, building envelopes, systems, and equipment. This guide is intended to be used by construction professionals, restoration professionals, engineers, and other design...

DEF STAN 59-99: PART 1 - Coolers, Infrared Detector, Joule-Thomson Part 1: General Requirements
August 16, 1982 - MODUK

This Section of the Standard specifies the general test requirements for miniature gas coolers, employing the Joule-Thomson cooling principle, for use with infrared detector cells. It is to be used with the detail specifications in the PART 90 series of this Standard. These coolers...

UL 2333 - Standard for Infrared Thermometers
May 31, 2016 - ULSE

Infrared Thermometers UL 2333 1.1 These requirements cover portable, battery operated infrared thermometers and accessories affecting accuracy intended for food safety. 1.2 These requirements do not cover temperature indicating devices intended for non-food uses.

Advertisement