loading
Infrared Spectroscopy
January 30, 2018 - CRC

It is estimated that there are about 10 million organic chemicals known, and about 100,000 new organic compounds are produced each year. Some of these new chemicals are made in the laboratory and some are isolated from natural products. The structural determination of these compounds is the job of...

CSA C22.2 NO 72 - Heater elements
January 1, 2010 - CSA

This Standard applies to (a) heater elements for use in equipment that is intended to be connected to a supply of nominal system voltage of 600 V or less; and (b) those heater elements that are installed in accordance with the Rules of the Canadian Electrical Code, Part I. This...

J359_201801 - Infrared Testing
January 9, 2018 - SAE International

The scope of this SAE Information Report is to provide general information relative to the nature and use of infrared techniques for nondestructive testing. The document is not intended to provide detailed technical information, but will serve as an introduction to the theory and...

Infrared and Terahertz Detectors
December 26, 2018 - CRC

This new edition of Infrared and Terahertz Detectors provides a comprehensive overview of infrared and terahertz detector technology, from fundamental science to materials and fabrication techniques. It contains a complete overhaul of the contents including several new chapters and a...

UL 2333 - Standard for Infrared Thermometers
May 31, 2016 - ULSE

Infrared Thermometers UL 2333 1.1 These requirements cover portable, battery operated infrared thermometers and accessories affecting accuracy intended for food safety. 1.2 These requirements do not cover temperature indicating devices intended for non-food uses.

GMW14322 - Heater Core
February 1, 2016 - GMW

Introduction Note: Nothing in this standard supercedes applicable laws and regulations. Note: In the event of conflict between the English and domestic language, the English language shall take precedence. Purpose. The standard shall define the Design Validation (DV), Production Validation (PV),...

AHRI 1330 - Performance Rating for Radiant Output of Gas Fired Infrared Heaters
January 1, 2015 - AHRI

This standard applies to Infrared Heaters that are Gas-Fired High-intensity Infrared Heaters and Gas-Fired Low-intensity Infrared Heaters with inputs up to and including 117.5 kW per burner intended for installation in and heating of outdoor or indoor...

CSA C22.2 NO 200 - Electric Waterbed Heater Systems
February 1, 1985 - CSA

This Standard applies to cord-connected electric heater systems intended for use with the mattresses of household water beds and designed for use in accordance with the Rules of the Canadian Electrical Code, Part I, on supply circuits having a nominal voltage of 120 V. This Standard...

ANSI Z83.26/CSA 2.37 - Gas-fired outdoor infrared patio heaters
January 1, 2020 - CSA/AM

This Standard applies to newly produced gas-fired outdoor infrared patio heaters (see Clause 3) hereinafter referred to as "heaters" or "appliances", constructed entirely of new, unused parts and materials for use with: a) natural gas; or b) propane. The heaters covered...

Infrared Design Examples
January 1, 2009 - SPIE

This tutorial covers infrared design examples in considerable detail, building on principles presented in an earlier text, 'Introduction to Infrared System Design' (SPIE PRESS Vol. TT24). The text explores a range of problems illustrating several design issues, with applications in...

PIP VESEH001 - Electric Immersion Process Heater Specification
December 1, 2016 - PIP

This Practice provides minimum technical requirements for the process and mechanical design, materials, fabrication, inspection, and testing of electric immersion process heaters and associated controls, including thyristor control panels. This Practice applies to electric immersion process...

EIA-268 - Infrared-Filter Transmission
January 1, 1963 - ECIA

PURPOSE The purpose of this standard is to establish the transmission of an infrared filter for use in making certain measurements on electron tubes. It is entirely feasible that additional infrared-filter standards will be proposed in the future as industry finds them to be necessary.

GME L-1B1201-2 - Heater Cores
July 30, 1979 - GME
A description is not available for this item.
GME QT 126529 - HEATER CONTROLS
GME
A description is not available for this item.
GME B 300 0678 - HEATER PAINT
GME
A description is not available for this item.
MS 36346 - HEATER, ELECTRIC
NPFC
A description is not available for this item.
MIL-H-395 - HEATER,BITUMEN
NPFC
A description is not available for this item.
UFGS-32 01 16.75 - HEATER SCARIFYING OF ASPHALT PAVING
February 1, 2017 - ARMY

NOTE: This guide specification covers the requirements for heater scarifier procedures for bituminous pavements in connection with surface treatments or asphalt overlays.

Handbook of Near-Infrared Analysis
January 1, 2021 - CRC

Rapid, inexpensive, and easy-to-deploy, near-infrared (NIR) spectroscopy can be used to analyze samples of virtually any composition, origin, and condition. The Handbook of Near Infrared Analysis, Fourth Edition, explores the factors necessary to perform accurate and time- and...

Infrared Optics and Zoom Lenses
January 1, 2009 - SPIE

Ten years after the publication of Infrared Optics and Zoom Lenses, this text is still the only current publication devoted exclusively to infrared zoom lenses. This updated second edition includes 18 new refractive and reflective infrared zoom systems, bringing the total...

Advertisement