loading
ASTM E310-21(2026) - Standard Reference Radiographs for Tin Bronze Castings
July 1, 2026 - ASTM International

1.1 These reference radiographs illustrate various categories, types, and severity levels of discontinuities occurring in tin bronze and related alloy castings. The reference radiograph films are an adjunct to this document and must be purchased separately from ASTM International if needed (see 2...

ASTM E3185-21(2026) - Standard Digital Reference Images for Tin Bronze Castings
July 1, 2026 - ASTM International

1.1 These digital reference images illustrate various categories, types, and severity levels of discontinuities occurring in tin bronze and related alloy castings. The digital reference images are an adjunct to this document and must be purchased separately from ASTM International if needed (see...

ASTM D6365-26 - Standard Practice for Nondestructive Testing of Geomembrane Seams Using the Spark Test
June 15, 2026 - ASTM International

1.1 This practice covers the nondestructive testing of field seams in geomembranes using the spark test. A suspect area is indicated by the generation of a spark. The test is applicable to seams made by the extrusion method, seams made by using welding tape (a strip of the same type of material as...

ASTM D1566-26 - Standard Terminology Relating to Rubber
June 1, 2026 - ASTM International

1.1 This terminology covers definitions of technical terms used in the rubber industry. Terms that are generally understood or adequately defined in other readily available sources are not included. 1.2 Definitions for terms that have been established by other bodies recognized as expert in the...

ASTM E1046-85(2026) - Standard Specification for Glass Westergren Tube, Disposable
June 1, 2026 - ASTM International

This specification covers a disposable glass Westergren tube used for measuring the erythrocyte sedimentation rate. Covered by this specification are Type I (standard Westergren tube used in conventional racks only) and Type II (self-zeroing tubes used with racks that have convenient disposable...

ASTM E186-20(2026) - Standard Reference Radiographs for Heavy-Walled (2 to 412 in. (50.8 to 114 mm)) Steel Castings
July 1, 2026 - ASTM International

1.1 These reference radiographs illustrate various categories, types, and severity levels of discontinuities occurring in steel castings that have section thicknesses of 2?in. to less than 41/2 in. (50.8?mm to 114 mm). The reference radiograph films are an adjunct to this document and must be...

ASTM E280-21(2026) - Standard Reference Radiographs for Heavy-Walled (412 to 12 in. (114 to 305 mm)) Steel Castings
July 1, 2026 - ASTM International

1.1 These reference radiographs illustrate various categories, types, and severity levels of discontinuities occurring in steel castings that have section thicknesses of 41/2 in. to 12?in. (114?mm to 305 mm). The reference radiograph films are an adjunct to this document and must be purchased...

ASTM E446-20(2026) - Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness
July 1, 2026 - ASTM International

1.1 These reference radiographs illustrate various categories, types, and severity levels of discontinuities occurring in steel castings that have section thicknesses up to 2 in. (50.8 mm) (see Note 2). The reference radiograph films are an adjunct to this standard and must be purchased separately...

ASTM F3085-14(2026) - Standard Specification for Air Soft Gun Barrel Blocking Devices
May 1, 2026 - ASTM International

This specification outlines the basic performance requirements and corresponding test methods for barrel blocking devices used in the sport of air soft. It covers air soft gun barrel blocking devices that may be inserted or otherwise function to prevent an airsoft projectile from leaving the...

ASTM F2098-26 - Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) to Metal Insert and Plastic Insert Fittings
February 1, 2026 - ASTM International

This specification covers stainless steel clamps for securing SDR9 cross-linked polyethylene (PEX) tubing to metal insert and plastic insert fittings. All performance tests shall be performed on assemblies of fittings, clamps and PEX tubing. Clamps shall meet the material and...

ASTM F1408-20a(2026) - Standard Practice for Subcutaneous Screening Test for Implant Materials
April 15, 2026 - ASTM International

4.1 This practice is a guideline for a short-term screening test for the evaluation of the tissue response to materials that may be selected for implantation in the human body and should be done in accordance with good laboratory practices. This test may be performed prior to long-term testing (for...

ASTM E3087-18(2026) - Standard Test Method for Measuring Capture Efficiency of Domestic Range Hoods
April 1, 2026 - ASTM International

5.1 Cooking can be one of the most polluting activities commonly and regularly occurring in residential environments. Capturing airborne cooking contaminants before they can mix with the indoor air is a critical indoor air quality control method. 5.2 Range hoods are used in homes to remove...

ASTM F1807-26 - Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps, for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
February 1, 2026 - ASTM International

This specification covers metal insert fittings and copper crimp rings for use with SDR9 cross-linked polyethylene (PEX) tubing. All performance tests shall be performed on assemblies of fittings, crimp rings, and PEX tubing. Fittings and crimp rings shall meet the material and dimensional...

ASTM E1976-26 - Standard Specification for Shelter, Tactical, Nonexpandable
March 15, 2026 - ASTM International

This specification covers a rigid wall, nonexpendable shelter constructed of aluminum-faced, nonmetallic honeycomb sandwich panels. Electrical continuity testing, water leakage and operational testing, performance testing, paint adhesion testing, packaging examination, thermal shock test, panel...

ASTM A342/A342M-26 - Standard Test Methods for Permeability of Weakly Magnetic Materials
May 1, 2026 - ASTM International

1.1 These test methods cover four procedures for determination of the permeability [relative permeability] of materials having a relative permeability not exceeding 6.0. 1.2 The test methods covered are as follows: 1.2.1 Test Method 1-Fluxmetric Method is suitable for materials with relative...

ASTM E1555-20(2026) - Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair
April 1, 2026 - ASTM International

1.1 This specification defines those characteristics that are required of adhesives to be used in the repair of sandwich panels for durable, rigidwall, relocatable structures. 1.1.1 This specification covers two-part epoxy adhesive suitable for bonding aluminum alloy facings to nonmetallic core,...

ASTM F3809-26 - Standard Test Method for Assessment of Fire Behavior of Mattresses in Detention and Correctional Facilities by Mass Loss
January 1, 2026 - ASTM International

1.1 This is a fire-test-response standard. 1.2 This test method covers a means of measuring mass loss and fire behavior (and, optionally, smoke obscuration), from mattresses intended for detention or correctional facilities, by igniting the mattress, or mattress insert, with sheets of...

ASTM F1807-25 - Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps, for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
December 1, 2025 - ASTM International

This specification covers metal insert fittings and copper crimp rings for use with SDR9 cross-linked polyethylene (PEX) tubing. All performance tests shall be performed on assemblies of fittings, crimp rings, and PEX tubing. Fittings and crimp rings shall meet the material and dimensional...

ASTM A423/A423M-19(2026) - Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes
February 1, 2026 - ASTM International

This specification covers standards for minimum-wall-thickness, seamless, and electric-resistance welded low-alloy steel tubes to be used for pressure containing parts, that is economizers, and for other corrosion resistant applications. Steel tubes shall either be processed to hot or cold finish....

ASTM C900-25 - Standard Test Method for Pullout Strength of Hardened Concrete
December 1, 2025 - ASTM International

1.1 This test method covers determination of the pullout strength of hardened concrete by measuring the force required to pull an embedded metal insert and the attached concrete fragment from a concrete test specimen or structure. The insert is either cast into fresh concrete or...

Advertisement