loading
API INSPECTION REFINERY 1 - Guide for Inspection of Refinery Equipment Chapter I - Introduction
January 1, 1961 - API

PREFACE This chapter is one of a series which make up the manual, Guide for Inspection of Refinery Equipment. It is based on the accumulated knowledge and experience of engineers of the petroleum industry. All users are invited to submit suggested revisions to the director of the Division of...

SSPC INSPECTION OF COATIN - THE INSPECTION OF COATINGS AND LININGS
SSPC
A description is not available for this item.
ICBO UBC INSPECTION - UBC FIELD INSPECTION WORKBOOK
ICBO
A description is not available for this item.
APPEARANCE INSPECTION - APPEARANCE INSPECTION OF FINISHED SURFACES
ASQ
A description is not available for this item.
IEEE SOFTWARE INSPECTION - SOFTWARE INSPECTION: AN INDUSTRY BEST PRACTICE
IEEE
A description is not available for this item.
ASTM E329-26 - Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
June 1, 2026 - ASTM International

1.1 This specification defines the minimum requirements for agencies engaged in any of the following: (a) Inspection of specified methods and materials used in construction, (b) Special inspection, and (c) Testing of materials used in construction. 1.2 Criteria are provided for...

ASTM E155-20(2026) - Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings
July 1, 2026 - ASTM International

4.1 Personnel utilizing reference radiographs to this standard shall be qualified and authorized to perform radiographic interpretation in accordance with a nationally or internationally recognized NDT personnel qualification practice or standard such as ANSI/ASNT-CP-189, SNT-TC-1A, NAS 410, ISO...

FDA QS INSPECTION - GUIDE TO INSPECTIONS OF QUALITY SYSTEMS
HHS
A description is not available for this item.
ASTM D6752/D6752M-26 - Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
August 1, 2026 - ASTM International

4.1 The results obtained from this method can be used to determine the unit weight of compacted asphalt mixtures, and in conjunction with Test Method D3203, to obtain percent air voids. These values in turn may be used in determining the relative degree of compaction. 4.2 Since specific gravity has...

ASTM F1236-26 - Standard Guide for Visual Inspection of Electrical Protective Rubber Products
April 1, 2026 - ASTM International

1.1 The purpose of this guide is to present methods and techniques for the visual inspection of electrical protective rubber products. This guide also includes descriptions and photographs of irregularities found in these products. Note 1: It is not the purpose of this guide to establish the...

ASTM E2024/E2024M-11(2026)e1 - Standard Practice for Atmospheric Leaks Using a Thermal Conductivity Leak Detector
July 1, 2026 - ASTM International

5.1 These test methods are useful for locating and estimating the size of pressurized gas leaks, either as quality control tests or as field inspection procedures. Also, they are valuable as pretests before other more time consuming and more sensitive leak tests are employed. These test...

ASTM E2905/E2905M-26 - Standard Practice for Examination of Mill and Kiln Girth Gear Teeth—Electromagnetic Methods
July 1, 2026 - ASTM International

5.1 Visual interpretation of gear teeth condition, such as contact patterns, scuffing, and wear, differs from examination for surface-breaking cracks or early signs of macro-pitting. Guidance for visual interpretation of gear tooth condition is provided in ASNI/AGMA 1010-F14. 5.2 Eddy current array...

ASTM E1955-20(2026) - Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM Reference Radiographs
July 1, 2026 - ASTM International

1.1 This standard covers requirements for radiographic examination for soundness of welds in fabricated steel by comparison to selected severity levels of Reference Radiographs E390, Vol II. The base material varies from greater than 0.25?in. to 3 in. (6.4?mm to 76 mm) inclusive in thickness....

ASTM A536-26a - Standard Specification for Ductile Iron Castings
July 1, 2026 - ASTM International

This specification covers ductile iron castings, also known as spheroidal or nodular iron, that is described as cast iron with the graphite substantially spheroidal in shape and essentially free of other forms of graphite. Appropriate heat treatment shall be identified according to grades, as...

ASTM E3022-26a - Standard Practice for Measurement of Emission Characteristics and Requirements for LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle Testing
July 1, 2026 - ASTM International

1.1 This practice covers the procedures for testing the performance of ultraviolet A (UV-A), light emitting diode (LED) lamps used in fluorescent penetrant and fluorescent magnetic particle testing (see Guides E709 and E2297, and Practices E165/E165M, E1208, E1209, E1210, E1219, E1417/E1417M, and...

ASTM F3095-17a(2026) - Standard Practice for Laser Technologies for Direct Measurement of Cross Sectional Shape of Pipeline and Conduit by Rotating Laser Diodes and CCTV Camera System
June 1, 2026 - ASTM International

1.1 This practice covers the procedure for the post installation verification and acceptance of buried pipe deformation using a visible rotating laser light diode(s), a pipeline and conduit inspection analog or digital CCTV camera system and image processing software. The combination CCTV...

ASTM F21-20(2026) - Standard Test Method for Hydrophobic Surface Films by the Atomizer Test
July 1, 2026 - ASTM International

5.1 The atomizer test as described in this test method is rapid, nondestructive, and may be used for control and evaluation of processes for the removal of hydrophobic contaminants. The test may also be used for the detection and control of hydrophobic contaminants in processing environments. For...

ASTM B381-26 - Standard Specification for Titanium and Titanium Alloy Forgings
July 1, 2026 - ASTM International

This specification covers 39 grades of annealed titanium and titanium alloy forgings as Grade F-1, Grade F-2, Grade F-2H, Grade F-3, Grade F-4, Grade F-5, Grade F-6, Grade F-7, Grade F-7H, Grade F-9, Grade F-11, Grade F-12, Grade F-13, Grade F-14, Grade F-15, Grade F-16, Grade F-16H, Grade F-17,...

Advertisement