4.1 The rational for developing a separate standard practice for Aerial Adventure Courses is based on the unique functional, operational and patron participation requirements when compared to amusement rides and devices. 4.2 The purpose of this practice is to provide designers, manufacturers,...
4.1 The rational for developing a separate standard practice for Aerial Adventure Courses is based on the unique functional, operational and patron participation requirements when compared to amusement rides and devices. 4.2 The purpose of this practice is to provide designers, manufacturers,...
1.1 This specification addresses the airworthiness requirements for the installation and integration of propeller systems. 1.2 This specification is applicable to aeroplanes as defined in F44 terminology standard. 1.3 The applicant for a design approval must seek the individual guidance to...
5.1 This is intended to outline O&M issues that require discussion and mutual agreement by both the optical fiber cable owner and sewer pipeline operator. The purpose is developing sufficient written procedures and practices to allow optical fiber systems to coexist as a secondary use within a...
5.1 The high-temperature capabilities of advanced ceramics are a key performance benefit for many demanding engineering applications. In many of those applications, advanced ceramics will have to perform across a broad temperature range. The thermal expansion, thermal diffusivity/conducti
1.1 This specification covers minimum requirements for the design and integration of Fuel Storage and Delivery system installations for aeroplanes. 1.2 This specification is applicable to aeroplanes as defined in the F44 terminology standard. 1.3 The applicant for a design approval must seek...
This specification provides minimum requirements for the installation and integration of powerplant system units and is applicable to small aeroplanes as defined in the F44 terminology standard. The applicant for a design approval must seek the individual guidance to their respective civil...
1.1 This specification covers minimum requirements for gliders, within the scope of Specification F3851?-?26 Specification for Light Sport Category Aircraft. Note 1: Referenced standards may have further limitations. 1.2 Units-The values given in this standard are in SI units and are to be regarded...
1.1 This specification covers minimum requirements for Powered Parachute Aircraft, within the scope of Speci?cation F3851?-?26 Specification for Light Sport Category Aircraft. Note 1: Referenced standards may have further limitations. 1.2 Units-The values given in this standard are in SI units and...
1.1 This speci?cation covers minimum requirements for Powered Lift and Multicopter, within the scope of Specification F3851?-?26 Speci?cation for Light Sport Category Aircraft. Note 1: Referenced standards may have further limitations. 1.2 Units-The values given in this standard are in SI units and...
1.1 This guide covers the general principles and considerations to plan, design, execute, and integrate data for consumer product tests across cultures and countries (cross-cultural consumer research). 1.2 In this guide, special consideration is given to language and translation,...
1.1 This practice covers software development, validation and verification practices for software that is part of an unmanned aircraft system (UAS), including its associated elements. It may also be used by third-party service providers, including UAS Traffic Management (UTM) service providers. 1.1...
1.1 This specification covers the requirement for operating limitations, markings, placards, and warnings for light sport aircraft. This includes those items necessary for safe operation and occupant warnings. It also defines the minimum requirements for legibility and consistency of markings. 1.2...
1.1 This specification covers the minimum requirements for the unique aspects of aircraft intended for water operations. These requirements apply in addition to any other applicable requirements in other standards or as specified in related aircraft integration standards. 1.2 Units-The...
1.1 This practice covers two methods to determine the corrosion rate of steel in field and large concrete structures, that cannot be currently obtained by the current corrosion methods, Test Methods C876 and G59. The in-field measurement of the corrosion current in existing concrete structures is...
1.1 This specification covers the requirements for light sport aircraft related to occupant safety as required by reference from integration standards. This specification covers areas such as external inertial loads, visibility, emergency evacuation, baggage restraint, occupant restraints...
1.1 This specification covers requirements for Indirect Flight Controls (IFC) equipment in light sport category aircraft. It recognizes there are three fundamental pilot functions of aviate, navigate, and communicate. This specification addresses the aviate function, which is the function of...
5.1 In a circular economy, products and their materials can maintain economic and societal value through resource management actions such as: (1) extended-use processing strategies, including reuse, repair, retrofit, and refurbish; (2) end-of-use processing strategies, including cascade and...
1.1 This speci?cation covers minimum requirements for airplanes, within the scope of Specification F3851?-?26 Specification for Light Sport Category Aircraft. Note 1: Referenced standards may have further limitations. 1.2 Units-The values given in this standard are in SI units and are to be...
Narrow Your Results