Narrow Your Results
This document specifies the acceptance criteria for the surface examination of steel, nickel alloy and cobalt alloy investment castings by visual testing.
This specification covers a titanium alloy in the form of four quality-grades of investment castings.
1.1 This specification covers aluminum-alloy investment castings designated as shown in Table 1. 1.2 This specification is not intended for aluminum-alloy investment castings used in aerospace applications. 1.3 Alloy and temper designations are in accordance with ANSI...
1.1 This specification covers aluminum-alloy investment castings designated as shown in Table 1. 1.2 This specification is not intended for aluminum-alloy investment castings used in aerospace applications. 1.3 Alloy and temper designations are in accordance with ANSI...
The process of investment casting has come to occupy a key position in the range of modern metal casting techniques. Over the half-century dating from 1940,what had been a small and highly specialised sector of casting activity developed into a worldwide and distinctive...
This specification covers magnesium-alloy investment castings designated as AM100A, AZ81A, AZ91C, AZ91E, AZ92A, EQ21A, EZ33A, K1A, QE22A, ZE41A, and ZK61A. Sufficient stock shall be allowed for shrinkage and, where required, for finishing; but castings of excessive weight shall...
1.1 This specification covers all registered2 aluminum-alloy investment castings with the most common designated as shown in Table 1. 1.2 This specification is for aluminum-alloy investment castings used in general purpose applications. It may not address the mechanical...
This specification covers aluminum-alloy investment castings. Unless otherwise specified, only aluminum alloy conforming to the requirements shall be used in the remelting furnace from which molten metal is taken for pouring directly into castings. The castings shall...
This specification covers magnesium-alloy investment castings designated as AM100A, AZ81A, AZ91C, AZ91E, AZ92A, EQ21A, EZ33A, K1A, QE22A, ZE41A, and ZK61A. Sufficient stock shall be allowed for shrinkage and, where required, for finishing; but castings of excessive weight shall...
1.1 This specification covers aluminum-alloy investment castings designated as shown in Table 1. 1.2 This specification is not intended for aluminum-alloy investment castings used in aerospace applications. 1.3 Alloy and temper designations are in accordance with ANSI...
This specification covers magnesium-alloy investment castings designated as AM100A, AZ81A, AZ91C, AZ91E, AZ92A, EQ21A, EZ33A, K1A, QE22A, ZE41A, and ZK61A. Sufficient stock shall be allowed for shrinkage and, where required, for finishing; but castings of excessive weight shall...
This specification covers aluminum-alloy investment castings. Unless otherwise specified, only aluminum alloy conforming to the requirements shall be used in the remelting furnace from which molten metal is taken for pouring directly into castings. The castings shall...
Forms define the necessary data to be captured and consistently presented to comply with the requirements of Network Rail standards. The standard incorporates an Index which contains details of all forms issued in support of standards contained within the investment Projects standards...
This specification covers aluminum-alloy investment castings. Unless otherwise specified, only aluminum alloy conforming to the requirements shall be used in the remelting furnace from which molten metal is taken for pouring directly into castings. The castings shall...
This up-to-date reference on property investment highlights the problems with existing techniques of property valuation and appraisal and identifies possible ways forward for both research and practice.
This specification covers aluminum-alloy investment castings. Unless otherwise specified, only aluminum alloy conforming to the requirements shall be used in the remelting furnace from which molten metal is taken for pouring directly into castings. The castings shall...
