loading
ASTM D8152-26 - Standard Practice for Measuring Field Infiltration Rate and Calculating Field Hydraulic Conductivity Using the Modified Philip Dunne Infiltrometer Test
February 15, 2026 - ASTM International

5.1 This practice shall only be used on soils having infiltration rates ranging from 2.5 mm/h (field hydraulic conductivity of 6.9?×?10-7 m/s) to 15000 mm/h (field hydraulic conductivity of 4.0?×?10-3 m/s). 5.2 This practice is useful for field measurement of the infiltration rate and calculation...

ASTM F1281-26 - Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
February 1, 2026 - ASTM International

1.1 This specification covers a coextruded crosslinked polyethylene composite pressure pipe with a welded aluminum tube reinforcement between the inner and outer layers. The inner and outer crosslinked polyethylene layers are bonded to the aluminum tube by a melt adhesive. Included is a system of...

ASTM E2686-09(2026) - Standard Test Method for Volatile Organic Compound (VOC) Solvents Absorbed/Adsorbed By Simulated Soil Impacted by Pesticide Emulsifiable Concentrate (EC) Applications
February 1, 2026 - ASTM International

1.1 This test method simulates the application of an emulsion of a pesticide emulsifiable concentrate (EC) to soil with high organic matter (corn cob granules) and to soil with high inorganic matter (clay granules) and determines the amount of solvent retained by the granules, and withheld from the...

ASTM F1807-26 - Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps, for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
February 1, 2026 - ASTM International

1.1 This specification covers metal insert fittings and copper crimp rings, or alternate stainless steel clamps, for use with cross-linked polyethylene (PEX) tubing in Nominal Tubing Size (NTS) 3/8 , 1/2 , 5/8 , 3/4 , 1, 1 1/4 , 11/2 , and 2 nominal sizes that meet the requirements for...

ASTM F1807-25 - Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps, for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
December 1, 2025 - ASTM International

1.1 This specification covers metal insert fittings and copper crimp rings, or alternate stainless steel clamps, for use with cross-linked polyethylene (PEX) tubing in Nominal Tubing Size (NTS) 3/8 , 1/2 , 5/8 , 3/4 , 1, 1 1/4 , 11/2 , and 2 nominal sizes that meet the requirements for...

ASTM F2623-25 - Standard Specification for Polyethylene of Raised Temperature (PE-RT) Systems for Non-Potable Water Applications
August 1, 2025 - ASTM International

1.1 This specification establishes requirements for polyethylene of raised temperature (PE-RT) systems for non-potable water applications. System components include PE-RT SDR 9 tubing, manifolds, fittings, valves and other appurtenances, and mechanical and fusion joining. PE-RT tubing is pressure...

ASTM D5126-25 - Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in Vadose Zone
August 15, 2025 - ASTM International

5.1 Saturated hydraulic conductivity measurements are made for a variety of purposes varying from design of landfills and construction of clay liners to assessment of irrigation systems. Infiltrometers are commonly used where infiltration or percolation rates through a surface or subsurface...

ASTM D8550-25 - Standard Test Method for Determination of Infiltration Rate and Calculating Field Hydraulic Conductivity of Field Soils by Sealed Single-Ring Infiltrometer and Multiple Pressure Head Procedure
July 1, 2025 - ASTM International

5.1 This test method shall only be used on soils having infiltration rates ranging from 2.5 mm/h (6.9?×?10-7 m/s) to 1200 mm/h (3.3?×?10-4 m/s). 5.2 This test method provides the means to quantify field hydraulic conductivity (Kf) based on multiple pressure heads, infiltration rate of water,...

ASTM C505-19(2025) - Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints
January 1, 2025 - ASTM International

1.1 This specification covers nonreinforced concrete pipe with rubber gasket joints to be used for the conveyance of irrigation water with working pressures, including hydraulic transients, as shown in Table 1. 1.2 A complete metric companion to Specification C505 has been developed-C505M;...

ASTM C505M-19(2025) - Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints (Metric)
January 1, 2025 - ASTM International

1.1 This specification covers nonreinforced concrete pipe with rubber gasket joints to be used for the conveyance of irrigation water with working pressures, including hydraulic transients, as shown in Table 1. 1.2 This specification is the SI counterpart of Specification C505. Note 1: This...

ASTM F1281-25 - Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
May 1, 2025 - ASTM International

1.1 This specification covers a coextruded crosslinked polyethylene composite pressure pipe with a welded aluminum tube reinforcement between the inner and outer layers. The inner and outer crosslinked polyethylene layers are bonded to the aluminum tube by a melt adhesive. Included is a system of...

ASTM F1281-25e1 - Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
May 1, 2025 - ASTM International

1.1 This specification covers a coextruded crosslinked polyethylene composite pressure pipe with a welded aluminum tube reinforcement between the inner and outer layers. The inner and outer crosslinked polyethylene layers are bonded to the aluminum tube by a melt adhesive. Included is a system of...

ASTM F2060-00(2025) - Standard Guide for Maintaining Cool Season Turfgrasses on Athletic Fields
April 1, 2025 - ASTM International

1.1 This guide covers the minimum requirements for maintaining cool season turfgrasses used for natural surface athletic fields. Practices covered include mowing, fertilization, irrigation, core cultivation, overseeding, and pest management. 1.2 The decisions involved in maintaining a...

ASTM F2269-11(2025) - Standard Guide for Maintaining Warm Season Turfgrasses on Athletic Fields
April 1, 2025 - ASTM International

1.1 This guide covers the minimum requirements for maintaining warm-season turfgrasses used for natural surface athletic fields. Practices covered include mowing, fertilization, irrigation, core cultivation, winter overseeding, pest management, and requirements for management of dormant turf...

ASTM F1953-10(2024) - Standard Guide for Construction and Maintenance of Grass Tennis Courts
November 1, 2024 - ASTM International

4.1 A grass tennis court should provide a relatively uniform, high quality playing surface as it relates to footing and ball bounce. Undulations, rough surface, bare spots, weeds, and wet spots detract from good play. Playing surface quality is largely affected by construction and maintenance...

ASTM F3722-24 - Standard Practice for Heat Fusion Joining of Polypropylene (PP) Pipe and Fittings
October 1, 2024 - ASTM International

5.1 The procedures described in this practice are intended for joining of polypropylene (PP) pipe and fittings using suitable equipment and appropriate environmental control procedures. When properly implemented, strong leak-tight joints are produced. 5.2 Melt flow characteristics, average...

ASTM C118/C118M-24 - Standard Specification for Concrete Pipe for Irrigation or Drainage
January 1, 2024 - ASTM International

1.1 This specification covers nonreinforced concrete pipe to be used for the conveyance of irrigation water with working pressures, including hydraulic transients, as shown in Table 1 and for use in drainage. 1.2 The values stated in either imperial or metric units are to be regarded...

ASTM F2389-24a - Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
July 1, 2024 - ASTM International

This specification establishes the requirements for polypropylene (PP) piping system components such as pipe, fittings, valves, and manifolds used in water service lines, hot-and-cold water distribution, hydronic heating, and irrigation systems to transport industrial process fluids,...

UL 486G - Sealed Twist-On Connecting Devices
July 22, 2024 - ULSE

1.1 The wire connectors covered by these requirements are intended for use with copper conductor in accordance with installations covered by the National Electrical Code, NFPA 70; the Canadian Electrical Code, Part I, C22.1; and NOM 001 SEDE, Standard for Electrical Installations. The requirements...

ASTM F2389-24 - Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
May 15, 2024 - ASTM International

This specification establishes the requirements for polypropylene (PP) piping system components such as pipe, fittings, valves, and manifolds used in water service lines, hot-and-cold water distribution, hydronic heating, and irrigation systems to transport industrial process fluids,...

Advertisement