loading
GMW14675 - Exhaust System Isolator Requirements and Tests
August 1, 2017 - GMW

Introduction Note: Nothing in this standard supercedes applicable laws and regulations. Note: In the event of conflict between the English and domestic language, the English language shall take precedence. Purpose. This standard contains the general requirements and associated tests regarding...

QPL-5432 - ISOLATOR, VIBRATION
NPFC
A description is not available for this item.
JIS C 5932 - General rules of optical isolator
May 21, 2012 - JSA

This Standard specifies the general rules of optical isolators used in the field of fibre optics (hereafter referred to as "optical isolators") and provides common specifications of optical isolators such as related terms and definitions and classification. NOTE: The...

GMW16294 - Engine Crankshaft Torsional Isolator
December 1, 2016 - GMW
A description is not available for this item.
NR RT/ETE/4/2/8 - D.C. Isolator Number Plates
May 19, 1998 - NR
A description is not available for this item.
AAMI 13408-6 - Aseptic processing of health care products - Part 6: Isolator systems
January 1, 2005 - AAMI

This part of ISO 13408 specifies the requirements for isolator systems used for aseptic processing and offers guidance on qualification, bio-decontamination, validation, operation and control of isolator systems used for aseptic processing of health care products. This part of ISO...

ISO 13408-6 - Aseptic processing of health care products — Part 6: Isolator systems
April 1, 2021 - ISO

This document specifies the requirements for and provides guidance on the specification, selection, qualification, bio-decontamination, validation, operation and control of isolator systems related to aseptic processing of health care products and processing of cell-based health care...

MIL-S-19500/494 - SEMICONDUCTOR DEVICE OPTICALLY,COUPLED,ISOLATOR
NPFC
A description is not available for this item.
ASTM E1704-95(2010) - Standard Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures
May 1, 2010 - ASTM International

1.1 The guide covers the development of criteria for the acoustical performance of a broad variety of acoustical enclosures by identifying information necessary to unambiguously describe acoustical performance. This guide is not a standard ASTM specification for a sound-isolating...

ASTM E1704-95 - Standard Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures
June 15, 1995 - ASTM International

1.1 The guide covers the development of criteria for the acoustical performance of a broad variety of acoustical enclosures by identifying information necessary to unambiguously describe acoustical performance. This guide is not a standard ASTM specification for a sound-isolating...

ASTM E1704-95(2002) - Standard Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures
June 15, 1995 - ASTM International

1.1 The guide covers the development of criteria for the acoustical performance of a broad variety of acoustical enclosures by identifying information necessary to unambiguously describe acoustical performance. This guide is not a standard ASTM specification for a sound-isolating...

ASTM E1704 - Standard Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures
June 15, 1995 - ASTM

The guide covers the development of criteria for the acoustical performance of a broad variety of acoustical enclosures by identifying information necessary to unambiguously describe acoustical performance. This guide is not a standard ASTM specification for a sound-isolating...

JIS C 5932-1 - Optical isolator - Part 1: Generic specification
October 21, 2019 - JSA
A description is not available for this item.
ASTM E1704-95(2018) - Standard Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures
October 1, 2018 - ASTM International

1.1 The guide covers the development of criteria for the acoustical performance of a broad variety of acoustical enclosures by identifying information necessary to unambiguously describe acoustical performance. This guide is not a standard ASTM specification for a sound-isolating...

DESC-DWG-81028 - MICROCIRCUIT, HYBRID, OPTICAL COUPLED ISOLATOR, DUAL CHANNEL
DOD
A description is not available for this item.
NG TGN(E) 213 - Technical Guidance Notes - Isolator Don’t Believe Indication (DBI) Condition on Numeric Busbar Protection
December 1, 2005 - NG

PURPOSE AND SCOPE The purpose of this document is to describe the behaviour of REB 500, 7SS522 & DRS BB numeric busbar protections when the isolator DBI condition occurs. The report also gives guidance as to what needs to be done following the DBI occurrence.

DSF/PREN ISO 13408-6 - Aseptic processing of health care products – Part 6: Isolator systems (ISO/DIS 13408-6:2019)
DS

This document specifies the requirements for and provides guidance on the specification, selection, qualification, bio-decontamination, validation, operation and control of isolator systems related to aseptic processing of health care products and processing of cell based health care...

DSF/FPREN ISO 13408-6 - Aseptic processing of health care products – Part 6: Isolator systems (ISO/FDIS 13408-6:2020)
DS

This document specifies the requirements for and provides guidance on the specification, selection, qualification, bio-decontamination, validation, operation and control of isolator systems related to aseptic processing of health care products and processing of cell based health care...

DIN EN ISO 13408-6 - Aseptic processing of health care products - Part 6: Isolator systems (ISO 13408-6:2005 + Amd 1:2013) (includes Amendment A1:2013)
July 1, 2013 - DIN

This part of ISO 13408 specifies the requirements for isolator systems used for aseptic processing and offers guidance on qualification, bio-decontamination, validation, operation and control of isolator systems used for aseptic processing of health care products. This part of ISO...

TIA/EIA-455-81 - FOTP-81 Compound Flow (Drip) Test for Filled Fiber Optic Cable
February 1, 2000 - TIA

This test is intended to verify that filling and flooding compounds will not flow from a filled fiber optic cable at stated temperatures.(Footnote 1) NOTE: Filling and flooding compounds minimize water penetration and assist in isolating fibers from outside environmental concerns. Footnote 1...

Advertisement