loading
SNZ AS/NZS 2040.2 - Performance of household electrical appliances – Clothes washing machines Part 2: Energy efficiency labelling requirements
February 19, 2021 - SNZ

This Standard specifies the energy efficiency labelling requirements for electric household clothes washing machines that are within the scope of the relevant legislation. NOTE Examples of appliances covered by this Standard are top loading non-drum type washers (usually...

ASTM D3136-04(2008)e1 - Standard Terminology Relating to Care Labeling for Apparel, Textile, Home Furnishing, and Leather Products
July 1, 2008 - ASTM International

1.1 This standard is a compilation of all terminology developed by Subcommittee D13.62 on Labeling and related to refurbishing and labeling for apparel, textile, home furnishing, and leather products other than upholstered furniture and floor coverings. 1.2 This terminology provides a...

ASTM D6288-23 - Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing
February 1, 2023 - ASTM International

1.1 This practice describes a procedure for separating recycled plastics based on their color and a procedure for washing dirty, ground plastic, which results in separation of light materials (density <1.00 g/cm3). This practice is not intended to represent generic washing procedures...

ASTM D6288 - Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing
December 1, 2017 - ASTM

This practice describes a procedure for separating recycled plastics based on their color and a procedure for washing dirty, ground plastic, which results in separation of light materials (density <1.00 g/cm3). This practice is not intended to represent generic washing procedures used...

ASTM D6288-17 - Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing
December 1, 2017 - ASTM International

1.1 This practice describes a procedure for separating recycled plastics based on their color and a procedure for washing dirty, ground plastic, which results in separation of light materials (density <1.00 g/cm3). This practice is not intended to represent generic washing procedures...

ASTM D6288-15 - Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing
October 1, 2015 - ASTM International

1.1 This practice describes a procedure for separating recycled plastics based on their color and a procedure for washing dirty, ground plastic, which results in separation of light materials (density <1.00 g/cm3). This practice is not intended to represent generic washing procedures...

ASTM D6288-09 - Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing
September 1, 2009 - ASTM International

1.1 The practice describes a procedure for separating recycled plastics based on their color (for example, green versus colorless) and a procedure for washing dirty, ground plastic which results in separation of light materials (density < 1.00 g/cm3). This practice is not intended to...

ASTM D6288-98(2003) - Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing
July 10, 2003 - ASTM International

1.1 The practice describes a procedure for separating recycled plastics based on their color (for example, green versus colorless) and a procedure for washing dirty, ground plastic which results in separation of light materials (density < 1.00 g/cm³). This practice is not intended to...

ASTM D6288-98 - Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing
July 10, 1998 - ASTM International

1.1 The practice describes a procedure for separating recycled plastics based on their color (for example, green versus colorless) and a procedure for washing dirty, ground plastic which results in separation of light materials (density < 1.00 g/cm3). This practice is not intended to...

BS 6612 - Specification for Graduated Compression Hosiery
June 28, 1985 - BSI

Covers hosiery exerting compression on upright legs, including pantihose, thigh-length and knee-length garments. Does not cover non-ambulatory garments, shaped bandages or individually-made garments. Specifies requirements for compression, compression profile, compression after washing,...

SNZ AS/NZS 6400 - Water efficient products-Rating and labelling
April 6, 2016 - SNZ

This Standard specifies requirements for the rating and labelling of products for water efficiency, and, where applicable, specifies minimum water efficiency standards. NOTE: Registration requirements are defined in the WELS Determination, available at www.waterrating.gov.au. This Standard...

ASTM D4720-08(2019) - Standard Performance Specification for Soft Window Covering Fabrics for Household Use
January 15, 2019 - ASTM International

4.1 This specification may be used to evaluate pertinent performance characteristics of washable and drycleanable soft window coverings, whether lined or unlined. 4.1.1 Soft window covering characteristics to be evaluated prior to repeated refurbishing include, but are not limited to, seam strength...

ASTM D4720-08(2013) - Standard Performance Specification for Soft Window Covering Fabrics for Household Use
October 1, 2013 - ASTM International

4.1 This specification may be used to evaluate pertinent performance characteristics of washable and drycleanable soft window coverings, whether lined or unlined. 4.1.1 Soft window covering characteristics to be evaluated prior to repeated refurbishing include, but are not limited to, seam strength...

ASTM D4720-08 - Standard Performance Specification for Soft Window Covering Fabrics for Household Use
April 1, 2008 - ASTM International

This specification may be used to evaluate pertinent performance characteristics of washable and drycleanable soft window coverings, whether lined or unlined. Soft window covering characteristics to be evaluated prior to repeated refurbishing include, but are not limited to, seam strength and...

ASTM D4720-87(2000) - Standard Practice for Evaluation of the Performance of Soft Window Coverings
January 1, 1994 - ASTM International

This practice may be used to evaluate pertinent performance characteristics of washable and drycleanable soft window coverings, whether lined or unlined. 4.1.1 Soft window covering characteristics to be evaluated prior to repeated refurbishing include, but are not limited to, seam strength and...

ASTM D5489-14 - Standard Guide for Care Symbols for Care Instructions on Textile Products
May 15, 2014 - ASTM International

4.1 This guide provides symbols and a system for their use by which care instructions for textile products can be conveyed in a simple, space-saving, and easily understood pictorial format that is not language dependent. See also ADJD5489 4.2 Care symbols are an important means for identifying the...

ASTM D5489-07(2013)e1 - Standard Guide for Care Symbols for Care Instructions on Textile Products
January 1, 2013 - ASTM International

4.1 This guide provides symbols and a system for their use by which care instructions for textile products can be conveyed in a simple, space-saving, and easily understood pictorial format that is not language dependent. See also ADJD5489 4.2 Care symbols are an important means for identifying the...

ASTM C675-91(2016) - Standard Test Method for Alkali Resistance of Ceramic Decorations on Returnable Beverage Glass Containers
October 1, 2016 - ASTM International

1.1 This test method covers determination of the alkali resistance of ceramic labels (hereafter referred to as ACL (Applied Color Label) on returnable beverage bottles (hereafter referred to as ware) to ensure the necessary durability of the label. A number of states require...

ASTM D5489-18 - Standard Guide for Care Symbols for Care Instructions on Textile Products
January 1, 2018 - ASTM International

4.1 This guide provides symbols and a system for their use by which care instructions for textile products can be conveyed in a simple, space-saving, and easily understood pictorial format that is not language dependent. See also ADJD5489-E-PDF. Currently, the FTC Care Labeling Rule...

Advertisement