loading
API SMART LEAK DETECTION - Smart Leak Detection and Repair (LDAR) for Control of Fugitive Emissions
June 1, 2004 - API

This report presents technology background and test results on an improved Leak Detection and Control method for application in refineries and petrochemical plants. Smart Leak Detection and Repair (LDAR) focuses on locating and repairing the most significant...

DNVGL-RP-F302 - Offshore leak detection
September 1, 2019 - DNVGL

The scope of this document is to define the process through the phases of a field development project for planning, design, integration and operation of an offshore leak detection system. The RP covers detection of hydrocarbon leakages. Leaks from topside processing...

UFGS-33 01 50.31 - LEAK DETECTION FOR FUELING SYSTEMS
February 1, 2020 - NAVY

NOTE: This guide specification outlines many of the requirements for leak detection systems for fueling applications.

DIN EN 13160-7 - Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets
December 1, 2016 - DIN

This European Standard gives requirements and the corresponding test/assessment methods applicable to leak detection lining kits and leak detection jacket kits. Leak detection lining kits and leak detection jackets kits intended to be used to...

DS/EN 13160-7 - Leak detection systems – Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets
July 11, 2016 - DS

This standard gives requirements and the corresponding test/assessment methods applicable to leak detection lining kits and leak detection jacket kits. Leak detection lining kits and leak detection jackets kits intended to be used as...

ASTM E1211/E1211M-17(2025) - Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors
July 1, 2025 - ASTM International

1.1 This practice describes a passive method for detecting and locating the steady state source of gas and liquid leaking out of a pressurized system. The method employs surface-mounted acoustic emission sensors (for non-contact sensors see Practice E1002), or sensors attached to the system...

ASTM D8551-24a - Standard Practices for Permanent Monitoring Systems for Electrical Leak Detection and Location
June 1, 2024 - ASTM International

4.1 Geomembranes are used as impermeable barriers to prevent liquids leaking out of landfills, ponds, and other containment facilities. In addition, geomembranes are also used to prevent external liquids leaking into to these types of facilities (for example, floating covers, landfill...

API RP 1175 - Pipeline Leak Detection - Program Management
December 1, 2015 - API

API Recommended Practice (RP) 1175 establishes a framework for Leak Detection Program (LDP) management for hazardous liquid pipelines that are jurisdictional to the U.S. Department of Transportation (specifically, 49 CFR Part 195). This RP is an industry consensus document written by...

DIN EN 13160-4 - Leak detection systems - Part 4: Requirements and test/assessment methods for sensor based leak detection systems
December 1, 2016 - DIN

This European Standard gives requirements and the corresponding test/assessment methods applicable to sensor based leak detection systems (leak detection kits). The leak detection kits are intended to be used in interstitial spaces, leakage containments or...

ASTM D8551-24 - Standard Practices for Permanent Monitoring Systems for Electrical Leak Detection and Location
February 1, 2024 - ASTM International

4.1 Geomembranes are used as impermeable barriers to prevent liquids leaking out of landfills, ponds, and other containment facilities. In addition, geomembranes are also used to prevent external liquids leaking into to these types of facilities (for example, floating covers, landfill...

ASTM F3169-16(2024) - Standard Test Method for Leak Detection in Blister Packaging by Vacuum Deflection Method by Laser Measurement
November 1, 2024 - ASTM International

5.1 Leaks in blister packs may affect product quality and such defects can arise from imperfections in the packaging material or bond between the sealed surfaces. 5.2 This method of leak testing is a useful tool as it allows non-destructive and non-subjective leak testing of...

DIN EN 13160-1 - Leak detection systems - Part 1: General Principles
December 1, 2016 - DIN

This European Standard specifies the general principles for leak detection systems for use with double-skin, single-skin, underground or above ground tanks and pipework designed for water polluting fluids

DS/EN 13160-4 - Leak detection systems – Part 4: Requirements and test/assessment methods for sensor based leak detection systems
July 11, 2016 - DS

This European Standard gives requirements and the corresponding test/assessment methods applicable to leak detection kits based on the detection of the presence of liquid and/or vapour in interstitial spaces, leakage containments or monitoring wells. The kits are usually...

IAPMO IGC 115 - AUTOMATIC WATER LEAK DETECTION AND CONTROL DEVICES
January 1, 2014 - IAPMO

This Standard covers automatic water leak detection and control devices and automatic water leak detection and shut‐off devices in sizes NPS‐1/4 to NPS‐10 and specifies requirements for materials, physical characteristics, performance testing, and markings The...

J1628_202011 - Technician Procedures for Refrigerant Leak Detection in Service of Mobile Air Conditioning Systems
November 30, 2020 - SAE International

This SAE Recommended Practice applies to the use, by automotive service technicians, of generally available leak detection methods to service motor vehicle passenger compartment air conditioning systems.

DS/EN 13160-6 - Leak detection systems – Part 6: Sensors in monitoring wells
July 11, 2016 - DS

This European Standard specifies the requirements for leak detection systems - class V for use with systems designed for fuels which are flammable, having a flash point up to but not exceeding 100 °C.

API PUBL 4716 - Buried Pressurized Piping Systems Leak Detection Guide
April 1, 2002 - API

INTRODUCTION Background Because of the complex physical configuration and unique operational characteristics of buried pressurized piping systems found in petroleum product terminals and airport hydrant fueling systems, proven leak detection technologies have not previously been...

Advertisement