loading
ASTM F1018-22 - Standard Specification for Steel Emergency Gear Stowage Locker
April 1, 2022 - ASTM International

1.1 This specification covers the design, material, and manufacture of steel emergency gear stowage lockers. 1.2 Emergency gear lockers shall be of four types (see Section 3). 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are...

ASTM D3730-17(2022) - Standard Guide for Testing High-Performance Interior Architectural Wall Coatings
December 1, 2022 - ASTM International

1.1 This guide covers the selection and use of test methods for high-performance interior architectural wall coatings (HIPAC) that differ from more conventional coatings by being tougher, more stain-resistant, more abrasion-resistant and, ordinarily, designed to be applied to wall surfaces of...

MIL-DTL-32671 - STOWAGE SYSTEMS, SMALL ARMS, SHIPBOARD
November 10, 2020 - NPFC

Scope. This specification covers shipboard lockers, racks, and bins intended for use as stowage systems for small arms on U.S. Navy surface ships.

A-A-59490 - TRUNK LOCKERS
April 15, 2020 - NPFC

This commercial item description (CID) covers two types of high impact plastic trunk lockers with or without trays. The type I trunk lockers are used in transporting and storing personal individual items, and the type II trunk lockers for transporting organizational equipment...

SNZ AS/NZS 4610.3 - Furniture – School and educational Part 3: Storage furniture — Strength, durability and stability
March 20, 2020 - SNZ

This Standard specifies strength, durability and stability requirements for free standing storage furniture for use in educational institutions. Storage furniture includes items such as, cupboards, bookcases, shelving units, bag and tote storage units and lockers, magazine racks, teaching...

AA-C-101 - CABINETS, HAZARDOUS MATERIAL (HM), SHIPBOARD QUALIFIED
October 29, 2019 - NPFC

This specification establishes the requirements for hazardous material (HM) cabinets (formerly known as lockers) that are qualified for shipboard (both surface ship and submarine) use.

IEC 60335-2-82 - Household and similar electrical appliances – Safety – Part 2-82: Particular requirements for amusement machines and personal service machines
June 1, 2020 - IEC

This International Standard deals with the safety of electric commercial amusement machines and personal service machines, their rated voltage being not more than 250 V for singlephase appliances and 480 V for other appliances. NOTE 101 Examples of appliances that are within the scope of this...

ASTM D8217-20 - Standard Guide for Access Control System
February 1, 2020 - ASTM International

3.1 Access control system devices are installed at strategic locations, such as all exterior entrances, administrative offices, grow rooms, processing rooms, manufacturing rooms, storage areas, transaction areas, loading dock, vaults, and locker room. 3.2 Access control system software...

ASTM F1018-87a(2017) - Standard Specification for Steel Emergency Gear Stowage Locker
January 1, 2017 - ASTM International

1.1 This specification covers the design, material, and manufacture of steel emergency gear stowage lockers. 1.2 Emergency gear lockers shall be of four types (see Section 3). 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are...

Learning Salesforce Lightning Application Development
July 1, 2018 - PACKT

Build, design, and style beautiful and informative applications on the Salesforce Lightning platform Key Features *Build and Test Lightning Components that enhance application usability and adaptability *Apply Security Best Practices to your Custom Lightning Components *Design Lightning Components...

DIN EN 16121 - Non-domestic storage furniture - Requirements for safety, strength, durability and stability (includes Amendment :2017)
December 1, 2017 - DIN

This European Standard specifies requirements for the safety, strength, durability and stability for all types of non-domestic storage furniture. It does not apply to domestic storage, office storage, industrial storage, kitchen, catering equipment, retail storage and industrial storage...

DS/EN 16121 - Non-domestic storage furniture – Requirements for safety, strength, durability and stability
October 11, 2017 - DS

This European Standard specifies requirements for the safety, strength, durability and stability for all types of non-domestic storage furniture. It does not apply to domestic storage, office storage, industrial storage, kitchen, catering equipment, retail storage, laboratory storage and industrial...

ASTM D3730 - Standard Guide for Testing High-Performance Interior Architectural Wall Coatings
June 1, 2017 - ASTM

This guide covers the selection and use of test methods for high-performance interior architectural wall coatings (HIPAC) that differ from more conventional coatings by being tougher, more stain-resistant, more abrasion-resistant and, ordinarily, designed to be applied to wall surfaces of steel,...

ASTM D3730-17 - Standard Guide for Testing High-Performance Interior Architectural Wall Coatings
June 1, 2017 - ASTM International

1.1 This guide covers the selection and use of test methods for high-performance interior architectural wall coatings (HIPAC) that differ from more conventional coatings by being tougher, more stain-resistant, more abrasion-resistant and, ordinarily, designed to be applied to wall surfaces of...

DIN SPEC 1108-4 - Dienstleistungen in der Abfall- und Wertstofflogistik, Strassenreinigung und im Winterdienst - Teil 4: Strassenreinigung
October 1, 2016 - DIN

Diese Vornorm legt die Prozesse der Straßenreinigung, Leerung von Abfallbehältern im öffentlichen Verkehrsraum (Papierkorbleerung) und Sonderreinigungen fest. Die Bereiche Bundesfernstraßen und Landesstraßen sind grundsätzlich ausgenommen. Für die Reinigung von Bundesfern- und Landesstraßen...

DIN EN 14749 - Furniture - Domestic and kitchen storage units and kitchen-worktops - Safety requirements and test methods
June 1, 2016 - DIN

This European Standard specifies safety requirements and test methods for all types of kitchen and bathroom storage units and domestic storage furniture and their components. It does not apply to non-domestic storage, office storage, industrial storage, catering equipment, retail storage and...

DS/EN 14749 - Furniture – Domestic and kitchen storage units and kitchen-worktops – Safety requirements and test methods
March 3, 2016 - DS

This European Standard specifies safety requirements and test methods for all types of kitchen and bathroom storage units and domestic storage furniture and their components. It does not apply to non-domestic storage, office storage, industrial storage, catering equipment, retail storage and...

Human Factors and Ergonomics Design Handbook, Third Edition
January 1, 2016 - MCGRAW

Master the art of user-centric planning and design. This thoroughly revised guide offers complete coverage of the latest trends and advances in ergonomics and psychology and lays out practical applications for today's designers. Written by a team of experts, Human Factors and Ergonomics Design...

SNZ AS/NZS 60335.2.82 - Household and similar electrical appliances - Safety - Part 2.82: Particular requirements for amusement machines and personal service machines
November 30, 2015 - SNZ

This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric commercial amusement machines and personal service machines, theirrated voltage being not more than 250 V for singlephase appliances and 480 V for other appliances. NOTE 101 Examples of...

ASTM F1018-87a(2010) - Standard Specification for Steel Emergency Gear Stowage Locker
May 1, 2010 - ASTM International

1.1 This specification covers the design, material, and manufacture of steel emergency gear stowage lockers. 1.2 Emergency gear lockers shall be of four types (see Section 3). 1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses...

Advertisement