loading
USGBC HOMES REF GUIDE - LEED FOR HOMES REFERENCE GUIDE
USGBC
A description is not available for this item.
USGBC HOMES RATING SYS - LEED FOR HOMES RATING SYSTEM
USGBC
A description is not available for this item.
CSA Z240 MH SERIES - Manufactured homes
January 1, 2016 - CSA

This Standard specifies general requirements for manufactured homes, including technical requirements, and requirements on quality control, markings, and provision of printed instructions. In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is...

UL 448B - Residential Fire Pumps Intended for One- and Two-Family Dwellings and Manufactured Homes
January 4, 2023 - ULSE

1.1 These requirements cover fire pumps intended for use in water-supply systems for one- and two-family dwellings and manufactured homes. 1.2 The pumps covered by these requirements are intended for installation and use in accordance with the Standard for the Installation of...

ASTM D3930-08(2023) - Standard Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes
May 1, 2023 - ASTM International

This specification provides the means to measure and evaluate the performance of adhesives for structural or semistructural bonding of wood-to-wood in manufactured homes. Wood as used in this specification includes lumber, plywood, particleboard, gypsum board, and all materials having...

NFPA 501A - Standard for Fire Safety Criteria for Manufactured Home Installations, Sites, and Communities
January 1, 2021 - NFPA

This standard shall cover fire safety requirements for the installation of manufactured homes and manufactured home sites, including accessory buildings, structures, and communities. Purpose. The purpose of this standard is to provide minimum requirements for the...

UL 307A - Standard for Liquid Fuel-Burning Heating Appliances for Manufactured Homes and Recreational Vehicles
July 24, 2018 - ULSE

Liquid Fuel-Burning Heating Appliances for Manufactured Homes and Recreational Vehicles UL 307A 1.1 These requirements apply to the following types of liquid fuel-burning appliances intended for installation in manufactured homes and recreational vehicles, including...

ANSI Z21.75/CSA 6.27 - Connectors for outdoor gas appliances and manufactured homes
January 1, 2016 - CSA/AM

This Standard applies to newly produced assembled connectors constructed entirely of new, unused parts and materials. Such connectors are intended for exterior use above ground for making the following non-rigid connections: a) between the gas supply and the gas inlet of an appliance for outdoor...

AWWA C714 - Cold-Water Meters for Residential Fire Sprinkler Systems in One- and TwoFamily Dwellings and Manufactured Homes
June 7, 2019 - AWWA

This standard describes cold-water meters used for residential fire sprinkler applications that meet the requirements of NFPA* 13D in one- and two-family dwellings and manufactured homes, in sizes ¾ in. (20 mm) through 2 in. (50 mm), and the materials and workmanship employed in their...

NFPA 13D - Standard for the Installation of Sprinkler Systems in One- and Two-Family Dwellings and Manufactured Homes
January 1, 2019 - NFPA

This standard shall cover the design, installation, and maintenance of automatic sprinkler systems for protection against the fire hazards in one- and two-family dwellings and manufactured homes. This standard shall not provide requirements for the design or installation of water mist...

NFPA 225 - MODEL MANUFACTURED HOME INSTALLATION STANDARD
NFPA
A description is not available for this item.
UL 1298 - Standard for Roof Trusses for Manufactured Homes
December 18, 2006 - ULSE
A description is not available for this item.
ASTM D3930-08(2015) - Standard Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes
April 1, 2015 - ASTM International

This specification provides the means to measure and evaluate the performance of adhesives for structural or semistructural bonding of wood-to-wood in manufactured homes. Wood as used in this specification includes lumber, plywood, particleboard, gypsum board, and all materials having...

IAPMO TS 26 - DRAINS FOR PREFABRICATED MANUFACTURED HOME SHOWERS
IAPMO
A description is not available for this item.
ASTM D5646-13(2025) - Standard Terminology Relating to Seams and Stitches Used in Home Sewing
November 1, 2025 - ASTM International

1.1 This terminology covers basic stitches made by sewing machines designed for home use and provides a uniform, easily understood language for the definitions and descriptions of seams and seam finishes used in home sewing. 1.1.1 These terms and definitions are not necessarily...

ASTM E3087-18(2026) - Standard Test Method for Measuring Capture Efficiency of Domestic Range Hoods
April 1, 2026 - ASTM International

5.1 Cooking can be one of the most polluting activities commonly and regularly occurring in residential environments. Capturing airborne cooking contaminants before they can mix with the indoor air is a critical indoor air quality control method. 5.2 Range hoods are used in homes to remove...

IAPMO TS 9 - GAS SUPPLY CONNECTORS FOR MANUFACTURED HOMES
IAPMO
A description is not available for this item.
UL 307B - Standard for Gas-Burning Heating Appliances For Manufactured Homes and Recreational Vehicles
October 31, 2006 - ULSE

Gas-Burning Heating Appliances for Manufactured Homes and Recreational Vehicles UL 307B 1.1 These requirements apply to the following gas fuel-burning heating appliances: a) Direct-vent system appliances for manufactured homes and recreational vehicles; and b) Vented...

ASTM E3404-25 - Standard Guide for Forensic Examination of Fibers
November 1, 2025 - ASTM International

5.1 Fibers are frequently encountered in casework, whether it be through the evidentiary item itself (for example, clothing, rope), or through the processing and collection of fibers from evidentiary items. Fibers can be exchanged between individuals, between individuals and objects, and between...

ASTM D3930 - Standard Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes
April 1, 2008 - ASTM

This specification provides the means to measure and evaluate the performance of adhesives for structural or semistructural bonding of wood-to-wood in manufactured homes. Wood as used in this specification includes lumber, plywood, particleboard, gypsum board, and all materials having...

Advertisement