loading
IEEE MEASUREMENT - MEASUREMENT, INSTURMENTATION, AND SENSORS HANDBOOK
IEEE
A description is not available for this item.
NEBB MEASUREMENT CD - Procedural Standards for Measurement of Sound and Vibration 2nd Ed. - CD
January 1, 2006 - NEBB

This latest edition of the Procedural Standards for Measurement is entirely rewritten and focuses on the measurement and reporting techniques for obtaining sound and vibration data that a NEBB contractor and other professionals in the heating, ventilating, and air conditioning (HVAC)...

THE TAO OF MEASUREMENT: A - The Tao of Measurement: A Philosopical View of Flow and Sensors
January 1, 2015 - ISA

This book describes how modern technology can be used to improve units of measurement. It paints a picture of a dynamic and changing universe, one in which systems can be integrated with improved measurement practices. It looks beyond the static nature of everyday objects to an...

JIS STD FOR MEASUREMENT - JIS Standards for Measurement Handbook
January 1, 2013 - JSA
A description is not available for this item.
ASTM E2253-26 - Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
July 1, 2026 - ASTM International

1.1 This test method provides procedures for validating temperature and enthalpy measurements of differential scanning calorimeters (DSC) and analytical methods based upon the measurement of temperature or enthalpy (or heat), or both, by DSC. Performance parameters determined include...

ASTM D6299-26a - Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
July 1, 2026 - ASTM International

5.1 This practice may be used to continuously demonstrate the proficiency of analytical measurement systems that are used for establishing and ensuring the quality of petroleum and petroleum products. 5.2 Data accrued, using the techniques included in this practice, provide the ability to...

ASTM D8394-21(2026) - Standard Test Method for Automated Measurement of Maturity, Fineness, Ribbon Width, and Micronaire of Cotton Fibers
July 1, 2026 - ASTM International

5.1 Cotton fiber that is on average finer and more mature is more desirable than coarse or immature fiber, although distinction between these qualities cannot be made quickly and accurately using current test methods. Immature fibers break more easily during processing and have a tendency to form...

ASTM E1354-26 - Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
August 1, 2026 - ASTM International

1.1 This fire-test-response standard provides for measuring the response of materials exposed to controlled levels of radiant heating with or without an external ignitor. 1.2 This test method is used to determine the ignitability, heat release rates, mass loss rates, effective heat of combustion,...

ASTM D5790-18(2026) - Standard Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry
July 1, 2026 - ASTM International

1.1 This test method covers the identification and simultaneous measurement of purgeable volatile organic compounds. It has been validated for treated drinking water, wastewater, and ground water. This test method is not limited to these particular aqueous matrices; however, the...

ASTM D1119-22(2026) - Standard Test Method for Percent Ash Content of Engine Coolants
August 1, 2026 - ASTM International

1.1 This test method covers the determination of ash content after ignition of commercial engine coolants and antirusts, as packaged or after use. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard...

ASTM D1123-22a(2026) - Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
August 1, 2026 - ASTM International

1.1 These test methods cover the determination of the water present in new or unused glycol-based coolant concentrates using a volumetric (Test Method A) or an automatic coulometric titrator procedure (Test Method B). 1.2 Many carbonyl compounds react slowly with the Fischer reagent, causing a...

ASTM D2624-26 - Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
July 1, 2026 - ASTM International

1.1 These test methods cover the determination of the electrical conductivity of aviation and distillate fuels with and without a static dissipator additive. The test methods normally give a measurement of the conductivity when the fuel is uncharged, that is, electrically at rest (known as...

ASTM F1488-26a - Standard Specification for Coextruded Composite Pipe
August 1, 2026 - ASTM International

1.1 This specification covers coextruded composite pipe, intended for non-pressure gravity flow drain waste or vent (DWV) service, or plastic underdrain service, or electrical or comunications conduit service produced by a coextrusion die system, in which the concentric layers are formed and...

ASTM E800-26 - Standard Guide for Measurement of Gases Present or Generated During Fires
June 1, 2026 - ASTM International

1.1 Analytical methods for the measurement of carbon monoxide, carbon dioxide, oxygen, nitrogen oxides, sulfur oxides, carbonyl sulfide, hydrogen halides, hydrogen cyanide, aldehydes, and hydrocarbons are described, along with sampling considerations. Many of these gases may be present in...

ASTM D6347/D6347M-05(2026) - Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
July 15, 2026 - ASTM International

5.1 The measured mean bulk density of a coal stockpile is used with a measurement of the stockpile volume per Test Method D6172/D6172M. Procedures to determine the quantity of stockpiled coal. This measure of quantity is often used as a reference value for adjusting inventory records.

ASTM D6204-26 - Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
June 1, 2026 - ASTM International

1.1 This test method covers the use of a rotorless oscillating shear rheometer for the measurement of the flow properties of raw rubber and unvulcanized rubber compounds. These flow properties are related to factory processing. 1.2 The values stated in SI units are to be regarded as standard...

ASTM D1335-21(2026) - Standard Test Method for Tuft Bind of Pile Yarn Floor Coverings
July 1, 2026 - ASTM International

1.1 This test method covers the measurement of force required to pull or break a tuft from a pile floor covering sample. 1.2 This test method is applicable to both cut and loop pile yarn floor covering. 1.3 The values stated in SI units are to be regarded as standard. No other units of...

ASTM C778-26 - Standard Specification for Standard Sand
July 1, 2026 - ASTM International

1.1 This specification covers standard sand for use in the testing of hydraulic cements. 1.2 The values stated in SI units are to be regarded as the standard. 1.3 Values in SI units shall be obtained by measurement in SI units or by appropriate conversion, using the Rules for Conversion and...

Advertisement