loading
ICBO MECHANICAL CODE - INTERNATIONAL MECHANICAL CODE
ICBO
A description is not available for this item.
ANSI MECHANICAL - ANSI MECHANICAL
IHS
A description is not available for this item.
ICBO MECHANICAL - INTERNATIONAL MECHANICAL CODE
ICBO
A description is not available for this item.
MPIF MECHANICAL ALLOYING - Mechanical Alloying and Milling
January 1, 2004 - MPIF
A description is not available for this item.
ASTM F3306-26 - Standard Test Method for Ion Release Evaluation of Medical Implants
June 1, 2026 - ASTM International

5.1 Components of implanted medical devices can release ions, which may lead to adverse biological effects if released in sufficient quantities. Therefore, it may be necessary to characterize the ion release behavior over time to verify that a medical device or device components or...

ISO HDBK MECHANICAL V2 - MECHANICAL VIBRATION AND SHOCK - VOLUME 2
ISO
A description is not available for this item.
IAPMO MECHANICAL CODE LL - UNIFORM MECHANICAL CODE LOOSE LEAF
IAPMO
A description is not available for this item.
IEEE TESTING OBJECT - TESTING OBJECT-ORIENTED SOFTWARE
IEEE
A description is not available for this item.
ASTM F2063-26 - Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants
June 1, 2026 - ASTM International

1.1 This specification covers the chemical, physical, mechanical, and metallurgical requirements for wrought nickel-titanium bar, plate, coil, and hollow containing nominally 54.5 to 57.0 weight percent nickel and used for the manufacture of medical devices and surgical implants. 1.2...

ASTM D5417-21(2026) - Standard Practice for Operation of the Vettermann Drum Tester
July 1, 2026 - ASTM International

1.1 This practice describes the equipment and operation of the Vettermann drum tester for testing pile yarn floor covering to produce changes in appearance and color due to changes in surface structure by mechanical action. 1.2 This practice is only applicable for use in...

ASTM F3783-26 - Standard Guide for Inspections and Maintenance of Permanently Installed Indoor Gymnasium Equipment
May 1, 2026 - ASTM International

4.1 This guide is to aid owners and operators of gymnasium and other types of athletic facilities when determining best practices for inspection, service, and maintenance of permanently installed equipment in these facilities. 4.2 Permanently installed gymnasium equipment discussed by...

ASTM D445-26 - Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
July 1, 2026 - ASTM International

5.1 Many petroleum products, and some non-petroleum materials, are used as lubricants, and the correct operation of the equipment depends upon the appropriate viscosity of the liquid being used. In addition, the viscosity of many petroleum fuels is important for the estimation of optimum...

ASTM A370-26 - Standard Test Methods and Definitions for Mechanical Testing of Steel Products
February 1, 2026 - ASTM International

1.1 These test methods cover procedures and definitions for the mechanical testing of steels, stainless steels, and related alloys. The various mechanical tests herein described are used to determine properties required in the product specifications. Variations in...

ASTM F1671/F1671M-26 - Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System
July 1, 2026 - ASTM International

5.1 This test method is based on Test Method F903 for measuring resistance of chemical protective clothing materials to penetration by liquids. This test method is normally used to evaluate specimens from individual finished items of protective clothing and individual samples...

ASTM C1259-21(2026) - Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Impulse Excitation of Vibration
June 1, 2026 - ASTM International

1.1 This test method covers determination of the dynamic elastic properties of advanced ceramics at ambient temperatures. Specimens of these materials possess specific mechanical resonant frequencies that are determined by the elastic modulus, mass, and geometry of the test...

ASTM F2836-26 - Standard Practice for Gasket Constants for Bolted Joint Design
June 1, 2026 - ASTM International

5.1 This practice determines the room temperature gasket constants Gb and a for initial seating and Gs for operating conditions as related to the tightness behavior of pressurized bolted flanged connections. These constants are used in determining the design bolt load for gasketed bolted joints. 5...

ASTM A965/A965M-26 - Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
June 1, 2026 - ASTM International

1.1 This specification covers austenitic stainless steel forgings for boilers, pressure vessels, high temperature parts, and associated equipment. 1.2 Supplementary requirements are provided for use when additional testing, inspection, or processing is required. In addition,...

Advertisement