loading
MPIF METAL MATRIX - Metal Matrix Composites
January 1, 2006 - MPIF
A description is not available for this item.
MPIF METALLOGRAPHIC ETCH - Metallographic Etching
January 1, 1999 - MPIF
A description is not available for this item.
MPIF METALS HANDBOOK - Metals Handbook
January 1, 1998 - MPIF
A description is not available for this item.
MPIF METALLOGRAPHY PRINCI - Metallography Principles and Practice
January 1, 1984 - MPIF
A description is not available for this item.
MPIF METALS ALLOYS - PARTICLE STRENGTHENING OF METALS AND ALLOYS
MPIF
A description is not available for this item.
MPIF METAL INJECTION - PART 19 - METAL INJECTION MOLDING
MPIF
A description is not available for this item.
MPIF METAL VOLUME 4 - METAL AND CERAMIC INJECTION MOLDING
MPIF
A description is not available for this item.
MPIF METALLURGY - POWDER METALLURGY SCIENCE
MPIF
A description is not available for this item.
MPIF METALLOGRAPHIC ATLAS - METALLOGRAPHIC ATLAS OF POWDER METALLURGY
MPIF
A description is not available for this item.
MBMA METAL BUILDING MNL - METAL BUILDING SYSTEMS MANUAL
MBMA
A description is not available for this item.
9984263 - Metalized Finish for Lighting Applications
March 1, 2016 - GMNA

This specification covers the requirements for a metalized finish system to be used on exterior lighting applications only. Material Description. The system consist of all or a combination of the following: basecoat, metallic layer, protective topcoat. Applications. Typical...

GMW17572 - Performance Requirements for Metallized Finish Coatings for Lighting Applications
June 1, 2018 - GMW

This specification covers the performance requirements to be used for a metalized finish that is protected within an exterior lighting application. The metalized finish is created using Physical Vapor Deposition (PVD); i.e., vacuum evaporation, sputter deposition, arc...

MIL-T-80144 - TANKS, METAL FINISHING
NPFC
A description is not available for this item.
AMS2450G - Sprayed Metal Finish, Aluminum
June 13, 2007 - SAE International

This specification covers the procedure to be used for spraying metallic parts with aluminum and the properties of the coating.

ASTM E2349-26 - Standard Practice for Safety Requirements in Metal Casting Operations: Sand Preparation, Molding, and Core Making; Melting and Pouring; and Cleaning and Finishing
January 1, 2026 - ASTM International

1.1 This practice covers the requirements of applying the design, construction, and operation of the machinery and equipment used in metal casting operations-sand preparation, molding and core making, melting and pouring, and cleaning and finishing. This practice does not apply to die...

ASTM B737-10(2026) - Standard Specification for Hot-Rolled and/or Cold-Finished Hafnium Rod and Wire
July 1, 2026 - ASTM International

This specification covers hot-, cold-, or both hot- and cold-rolled hafnium rods and wires in either one of two grades. All grades should be in the recrystallization annealed condition unless specified otherwise. The materials should be made from ingots produced by vacuum melting in an electron...

ASTM B177/B177M-11(2026) - Standard Guide for Engineering Chromium Electroplating
July 1, 2026 - ASTM International

1.1 This guide provides information about the deposition of chromium on steel for engineering uses. This is sometimes called "functional" or "hard" chromium and is usually applied directly to the basis metal and is usually thicker than decorative deposits. 1.2 The values stated in either SI...

ASTM A758/A758M-26 - Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness
July 1, 2026 - ASTM International

This guide covers standard specification for wrought-carbon steel butt-welding seamless or welded fittings specially processed to ensure better notch toughness. Heat treatment shall be required for all types of fittings. Fittings with mandatory radiographic examination of welds shall be included....

SAA AS/NZS 4506 - Metal Finishing - Thermoset Powder Coatings
March 5, 1998 - SAI
A description is not available for this item.
ASTM D4966-22(2026) - Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method)
July 1, 2026 - ASTM International

5.1 Acceptance Testing-this test method is not considered satisfactory for acceptance testing of commercial shipments of fabric. The between-laboratory precision of this test method is poor and, because of the nature of abrasion testing itself, technicians frequently fail to obtain results in...

Advertisement