loading
ANSI METRIC PKG - ANSI'S 7-VOLUME METRIC PACKAGE
ANSI
A description is not available for this item.
GM D200 - Recommended Hole Sizes for Metric Tapping Screws
February 1, 2011 - GMNA
A description is not available for this item.
MPAPS S-DM-1.101-GS/PL - Tapping Screws – Metric Series
October 1, 2020 - NAVISTAR
A description is not available for this item.
ASTM D8288-25 - Standard Test Method for Comparison of Metalworking Fluids Using a Tapping Torque Test Machine
November 1, 2025 - ASTM International

1.1 This test method describes a laboratory technique to evaluate the mean lubricant efficiency of metal removal fluids using an instrumented tapping machine that measures and records torque. 1.1.1 The method is applicable to all tap types, machining speeds, and alloys that can be...

ASTM F788/F788M-20(2025) - Standard Specification for Surface Discontinuities of Bolts, Screws, Studs, and Rivets, Inch and Metric Series
October 1, 2025 - ASTM International

This specification establishes allowable limits for the various types of surface discontinuities that may occur during the manufacture and processing of bolts, screws, and studs, including heat-treated machine screws, tapping screws, and sems. Types of surface discontinuities are: crack;...

CNS B 3062 - COUNTERSINK DRILL WITH METRIC TAPPING HOLE
BSMI
A description is not available for this item.
DELPHI DX500023 - RECOMMENDED HOLE SIZES FOR METRIC TAPPING SCREWS
DELPHI-I
A description is not available for this item.
ASTM E1007-25 - Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures
August 1, 2025 - ASTM International

1.1 This test method covers the measurement of the transmission of impact sound generated by a standard tapping machine through floor-ceiling assemblies and associated supporting structures in field situations. 1.2 Results are measurable for all types of floor-ceiling assemblies, including...

ASTM F3713-25 - Standard Practice for Measuring Mobile Manipulator Performance: Recording the Workpiece Configuration
March 1, 2025 - ASTM International

1.1 This practice describes accepted procedures for recording the configuration of workpieces used to conduct mobile manipulator performance evaluation. The information contained in this practice provides instructions and a test report to record workpiece configuration characteristics, such as...

GM D650 - Metric Tapping Screw and Conical Spring Washer Assemblies’ – Types AB, B, BF, BSD and BT
February 1, 2011 - GMNA
A description is not available for this item.
GM D651 - Metric Tapping Screw and Conical Spring Washer Assemblies – Types D, F, T and TR
February 1, 2011 - GMNA
A description is not available for this item.
GM D310 - Metric Hex Head Tapping Screws Types D, F and T
February 1, 2011 - GMNA

GENERAL This standard for Metric Head Tapping Screws of thread cutting Types D,F and T conforms in all essentials with the American National Standard covering metric tapping screws. For the 10mm size screw, it documents the 15.00 mm rather than the 16mm hexagon head...

ASTM E2197-24 - Standard Quantitative Disk Carrier Test Method for Determining Bactericidal, Virucidal, Fungicidal, Mycobactericidal, and Sporicidal Activities of Chemicals
September 1, 2024 - ASTM International

1.1 This test method is designed to evaluate the ability of test substances to inactivate vegetative bacteria, viruses, fungi, mycobacteria, and bacterial spores (1-7) on disk carriers of brushed stainless steel that represent hard, nonporous environmental surfaces and medical devices. It is also...

MPAPS S-EM-42.101-GS/PL - Tapping Bosses - Metric Series
June 1, 2015 - NAVISTAR
A description is not available for this item.
GM D110 - Metric Hex Head Tapping Screws Types AB, B, BF and BT
February 1, 2011 - GMNA

GENERAL. This standard for Metric Hex Head Tapping Screws of Thread forming Types AB and B and thread cutting Types BF and BT conforms in all essentials with the American National Standard covering metric tapping screws. For the 9.5 mm size screw, it documents the 15.00...

IFI-504 - Metric Self-Drilling Tapping Screws
January 1, 2007 - IFI/FASTNR
A description is not available for this item.
GM D314 - Metric Hex Flange Head Tapping Screws Types D, F and T
February 1, 2011 - GMNA

GENERAL This standard for Metric Hex flange Head Tapping Screws of thread cutting Types D,F and T conforms in all essentials with the American National Standard covering metric tapping screws. It should be noted the hexagon widths on these screw differ from those on the...

Advertisement