loading
NATO AMEDP-8.2 FRENCH - BASIC MILITARY MEDICAL REPORT
May 3, 2017 - NATO
A description is not available for this item.
ASTM F3518-21(2025)e1 - Standard Guide for Quantitative Measures for Establishing Exoskeleton Functional Ergonomic Parameters and Test Metrics
November 1, 2025 - ASTM International

1.1 This guide provides quantitative measures for assessing one or more specific ergonomic parameters with respect to exoskeletons. Furthermore, this guide should be used in conjunction with Practice F3474, Guide F3519, and Guide F3688. 1.2 This guide provides quantitative measures for the design,...

ASTM F3585-25a - Standard Test Method for Measuring Exoskeleton Cognitive Fit, Perceived Safety, and Acceptance
November 1, 2025 - ASTM International

5.1 Exoskeletons are being used in the industrial/occupational sector to enhance the safety and effectiveness of the user to perform tasks as well as in the medical sector to provide rehabilitation or mobility, or both, to people. This test method is primarily intended for use in the...

ASTM F3585-25ae1 - Standard Test Method for Measuring Exoskeleton Cognitive Fit, Perceived Safety, and Acceptance
November 1, 2025 - ASTM International

5.1 Exoskeletons are being used in the industrial/occupational sector to enhance the safety and effectiveness of the user to perform tasks as well as in the medical sector to provide rehabilitation or mobility, or both, to people. This test method is primarily intended for use in the...

ASTM F3474-25 - Standard Practice for Establishing Exoskeleton Functional Ergonomic Parameters and Test Metrics
June 15, 2025 - ASTM International

3.1 This practice describes what measure should be performed during the near (hours/days), mid (days/weeks), and far (months/years) stages of exoskeleton evaluation (Fig. 1). The functional conditions and metrics with respect to each task method are assessed from the body area(s) impacted by the...

DOD D 6015.21 - SAN ANTONIO JOINT MILITARY MEDICAL COMMAND (JMMC)
NPFC
A description is not available for this item.
ASTM B359/B359M-25 - Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins
October 1, 2025 - ASTM International

1.1 This specification2 covers the requirements for seamless copper and copper alloy tubing on which the external or internal surface, or both, has been modified by a cold-forming process to produce an integral enhanced surface for improved heat transfer. 1.2 The tubes are typically used in surface...

ASTM B359/B359M-25e1 - Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins
October 1, 2025 - ASTM International

1.1 This specification2 covers the requirements for seamless copper and copper alloy tubing on which the external or internal surface, or both, has been modified by a cold-forming process to produce an integral enhanced surface for improved heat transfer. 1.2 The tubes are typically used in surface...

ASTM F3747-25 - Standard Test Method for Exoskeleton Use: Crawling
February 1, 2025 - ASTM International

5.1 Exoskeletons are being used in the industrial/occupational, military, response, medical, and recreational sectors to enhance safety and effectiveness of the user to perform tasks. Crawling is a component of many tasks that someone would do while using an exoskeleton whether to...

ASTM F3772-25 - Standard Test Method for Exoskeleton Use: Ladders
June 1, 2025 - ASTM International

5.1 Ladder designs can vary greatly in, for example: number and size of steps, geometry, and materials, and for a variety of industries. Fig. 2 shows examples of various ladders. 5.2.1 Example-A test requestor instructs that a lower-body exoskeleton is to be worn by five able-bodied users who are...

ASTM F3748-25 - Standard Test Method for Exoskeleton Use: Inclined Planes
February 1, 2025 - ASTM International

5.1 Inclined planes can vary greatly in, for example: slope, length, width, surface coatings and coverings, and handrails, and for a variety of industries. Fig. 1 shows images of example inclined planes. Example applications versus inclined planes are shown in Table 1. (e) Metal roof; (f) aircraft...

MIL-STD-1691 - CONSTRUCTION AND MATERIAL SCHEDULE FOR MILITARY MEDICAL AND DENTAL FACILITIES
June 1, 1994 - NPFC

Scope and purpose. This standard establishes a definite demarcation between the various elements involved in the planning, funding, construction, and funding of the medical and dental facilities of the Armed Services, the Department of Veterans Affairs, the United States Public Health...

ASTM F3612-24 - Standard Practice for Lower Extremity Exoskeleton Locomotion Transitions
September 1, 2024 - ASTM International

5.1 Exoskeletons may be used in several domains, including for example, industrial, military, first-response, medical, and recreational, to provide potential benefits in supporting user capability, as well as the potential to prevent injury. Exoskeletons may be required to traverse...

ASTM F3580-24 - Standard Test Method for Exoskeleton Use: Stairs
September 1, 2024 - ASTM International

5.1 Staircase designs can vary greatly in, for example: number of steps, staircase geometry, surface coatings and coverings, and railings, and for a variety of industries. Fig. 1 shows examples of various staircases. 5.2 Exoskeletons are being used in the industrial/occupational, military,...

UFC 4-510-01 - DESIGN: \1\MEDICAL MILITARY \1\FACILITIES
November 1, 2012 - DOD

PURPOSE AND SCOPE. This Unified Facilities Criteria (UFC) 4-510-01 provides mandatory policies and procedures for programming, planning, design, and construction throughout the lifecycle of Military Medical Facilities, also referenced as Medical Treatment Facilities (MTFs),...

ASTM F3323-24 - Standard Terminology for Exoskeletons and Exosuits
June 1, 2024 - ASTM International

1.1 This terminology covers terms associated with exoskeletons and exosuits. By providing a common and consistent lexicon, the purpose of this terminology is to facilitate communication between individuals who may be involved in the research, design, deployment, and use of exoskeletons and exosuits...

ASTM F3387-23 - Standard Practice for Respiratory Protection
November 1, 2023 - ASTM International

1.1 This practice sets forth minimally accepted practices for occupational respirator use; provides information and guidance on the proper selection, use, and maintenance of respirators; and contains requirements for establishing, implementing, and evaluating respirator programs. 1.2 This practice...

ASTM F3582-22 - Standard Test Method for Exoskeleton Use: Gaps
November 15, 2022 - ASTM International

5.1 Exoskeletons are being used in the industrial/occupational, military, response, medical, and recreational sectors to enhance safety and effectiveness of the user to perform tasks. Traversing gaps is a component of many tasks that someone would do with an exoskeleton. For example,...

ASTM B359/B359M-23 - Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins
October 1, 2023 - ASTM International

1.1 This specification2 covers the requirements for seamless copper and copper alloy tubing on which the external or internal surface, or both, has been modified by a cold-forming process to produce an integral enhanced surface for improved heat transfer. 1.2 The tubes are typically used in surface...

Advertisement