loading
ISA CALIBRATION: A TECHNI - Calibration: A Technician's Guide
January 1, 2005 - ISA

This comprehensive review of calibration provides an excellent foundation for understanding principles and applications of the most frequently performed tasks of a technician. Topics addressed include terminology, bench vs. field calibration, loop vs. individual instrument...

ICBO NATIONAL ELECTRICAL - NATIONAL ELECTRICAL CODE
ICBO
A description is not available for this item.
IPC NATIONAL CONFERENCE - NATIONAL CONFERENCE: BASE MATERIALS AND LAMINATES
IPC
A description is not available for this item.
NATIONAL ELECTRICAL - NATIONAL ELECTRICAL SAFETY CODE
ANSI
A description is not available for this item.
IEEE NATIONAL ELECTRICAL - NATIONAL ELECTRICAL CODE
IEEE
A description is not available for this item.
ASTM ASTM51261-26 - Standard Practice for Calibration of Routine Dosimetry Systems for Radiation Processing
May 1, 2026 - ASTM International

4.1 Standards such as ISO 11137-1 for radiation sterilization of healthcare products and ISO 14470 for irradiation of food state that dosimetry used in the process's development, validation, and routine control adhere to specific requirements. These requirements state that the dosimetry must be...

ASTM C336-26 - Standard Test Method for Annealing Point and Strain Point of Glass by Fiber Elongation
July 1, 2026 - ASTM International

1.1 This test method covers the determination of the annealing point and the strain point of a glass by measuring the viscous elongation rate of a fiber of the glass under prescribed condition. 1.2 The annealing and strain points shall be obtained by following the specified procedure after...

ASTM E824-26 - Standard Test Method for Transfer of Calibration From Reference to Field Radiometers
March 1, 2026 - ASTM International

5.1 The methods described represent the preferable means for calibration of field radiometers employing standard reference radiometers. Other methods involve the employment of an optical bench and essentially a point source of artificial light. While these methods are useful for cosine and...

ASTM D7115-20(2026) - Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading
May 1, 2026 - ASTM International

1.1 This test method covers the procedure for the measurement of the Superpave Gyratory Compactor (SGC) internal angle of gyration using an instrument capable of simulating loading conditions similar to those created by an asphalt mixture specimen. 1.2 Units-The values stated in SI units are to be...

ASTM D2228-04(2026) - Standard Test Method for Rubber Property—Relative Abrasion Resistance by Pico Abrader Method
April 1, 2026 - ASTM International

1.1 This test method covers the determination of the abrasion resistance of vulcanized (thermoset) rubbers, thermoplastic elastomers, and elastomeric and similar materials to a standardized reference system. A standardized set of reference compounds is used to calculate relative abrasion resistance...

ASTM D8617-26 - Standard Test Method for Evaluation of Automotive Engine Oils for Soot-Viscosity Performance in a Cummins ISB Medium-Duty Diesel Engine
March 1, 2026 - ASTM International

1.1 This test method, commonly referred to as the Cummins ISB Viscosity Test, covers the utilization of a 5.9?L diesel engine equipped with exhaust gas recirculation and is used to evaluate oil performance with regard to soot induced viscosity increase. 1.2 The values stated in SI units are to be...

ASTM E3057-26 - Standard Test Method for Measuring Heat Flux Using Directional Flame Thermometers with Advanced Data Analysis Techniques
January 1, 2026 - ASTM International

5.1 Need for Heat Flux Measurements: 5.1.1 Independent measurements of temperature and heat flux support the development and validation of engineering models of fires and other high environments, such as furnaces. For tests of fire protection materials and structural assemblies, temperature and...

ASTM D7484-25a - Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine
November 1, 2025 - ASTM International

1.1 This test method, commonly referred to as the Cummins ISB Test, covers the utilization of a modern, 5.9?L, diesel engine equipped with exhaust gas recirculation and is used to evaluate oil performance with regard to valve-train wear. 1.2 The values stated in SI units are to be regarded as...

ASTM D6831-25 - Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
August 1, 2025 - ASTM International

1.1 This test method describes procedures for determining the mass concentration of particulate matter in gaseous streams using an automated, in-stack test procedure. This test method, which employs an in-situ, inertial microbalance, is based on inertial mass measurement using a hollow tube...

ASTM D6245-25 - Standard Guide on the Relationship of Indoor Carbon Dioxide Concentrations to Indoor Air Quality and Ventilation
September 1, 2025 - ASTM International

1.1 This guide describes the relationship of indoor carbon dioxide (CO2) concentrations to indoor air quality (IAQ) and building ventilation. 1.2 This guide contains background information on the health, comfort, and performance impacts of indoor CO2 exposure, as well as indoor CO2 limits contained...

ASTM D8256-25 - Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in the Sequence VH Spark-Ignition Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
July 1, 2025 - ASTM International

1.1 This test method is commonly referred to as the Sequence VH test, and it has been correlated with the Sequence VG test. The Sequence VG test was previously correlated with vehicles used in stop-and-go service prior to 1996, particularly with regard to sludge and varnish formation.3 It is one of...

ASTM D8114-25 - Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIE Spark Ignition
July 1, 2025 - ASTM International

1.1 This test method covers an engine test procedure for the measurement of the effects of automotive engine oils on the fuel economy of passenger cars and light-duty trucks with gross vehicle weight 3856 kg or less. The tests are conducted using a specified spark-ignition engine with a...

ASTM D8226-25 - Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIF Spark Ignition Engine
July 1, 2025 - ASTM International

1.1 This test method covers an engine test procedure for the measurement of the effects of automotive engine oils on the fuel economy of passenger cars and light-duty trucks with gross vehicle weight 3856?kg or less. The tests are conducted using a specified spark-ignition engine with a...

ASTM D8617-25 - Standard Test Method for Evaluation of Automotive Engine Oils for Soot-Viscosity Performance in a Cummins ISB Medium-Duty Diesel Engine
July 1, 2025 - ASTM International

1.1 This test method, commonly referred to as the Cummins ISB Viscosity Test, covers the utilization of a 5.9?L diesel engine equipped with exhaust gas recirculation and is used to evaluate oil performance with regard to soot induced viscosity increase. 1.2 The values stated in SI units are to be...

ASTM D7484-25 - Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine
July 1, 2025 - ASTM International

1.1 This test method, commonly referred to as the Cummins ISB Test, covers the utilization of a modern, 5.9?L, diesel engine equipped with exhaust gas recirculation and is used to evaluate oil performance with regard to valve-train wear. 1.2 The values stated in SI units are to be regarded as...

Advertisement