This latest edition of the Procedural Standards for Measurement is entirely rewritten and focuses on the measurement and reporting techniques for obtaining sound and vibration data that a NEBB contractor and other professionals in the heating, ventilating, and air conditioning (HVAC)...
1.1 This practice specifies the requirements for calibrating routine dosimetry systems for use in radiation processing, including establishing measurement traceability and estimating uncertainty in the measured dose using the calibrated dosimetry system. Note 1: Regulations or other...
5.1 This test method is used for measuring ammonia and ammonium ion in water samples and soil or plant extracts. 5.2 Ammonia compounds are widely distributed in the environment and may be applied as fertilizer, used as cleaning compounds, or used in water treatment. 5.3 Ammonia nitrogen compounds...
1.1 This test method covers the procedure for the measurement of the Superpave Gyratory Compactor (SGC) internal angle of gyration using an instrument capable of simulating loading conditions similar to those created by an asphalt mixture specimen. 1.2 Units-The values stated in SI units are...
1.1 This test method specifies a procedure for the determination of the kinematic viscosity, ?, of liquid petroleum products, both transparent and opaque, by measuring the time for a volume of liquid to flow under gravity through a calibrated glass capillary viscometer. The dynamic viscosity, ?,...
1.1 This test method covers measurement, in poises, of the apparent viscosity of lubricating greases in the temperature range from -54?°C to 38?°C (-65?°F to 100?°F). Measurements are limited to the range from 25?P to 100?000?P at 0.1?s-1 and 1?P to 100?P at 15?000?s-1. Note 1: At...
1.1 This guide covers the establishment and use of an ASTM-recommended file that consists of a set of nuclear data cross sections, uncertainty data, and associated product decay data for analysis of single or multiple sensor measurements in neutron fields related to light water reactor (LWR)...
6.1 The primary goal of this practice is to extract representative samples from PV modules for TCLP toxicity testing purposes in order to receive unbiased, comparable, and repeatable toxicity test results from independent TCLP testing laboratories. 6.2 Solar photovoltaic (PV) modules in the United...
4.1 This guide is to aid owners and operators of gymnasium and other types of athletic facilities when determining best practices for inspection, service, and maintenance of permanently installed equipment in these facilities. 4.2 Permanently installed gymnasium equipment discussed by this standard...
5.1 This guide is intended for the developers or sponsors of new aviation gasolines or additives to describe the data requirements necessary to support the development of specifications for these new products by ASTM members. The ultimate goal of the data generated in accordance with this guide is...
5.1 The methods described represent the preferable means for calibration of field radiometers employing standard reference radiometers. Other methods involve the employment of an optical bench and essentially a point source of artificial light. While these methods are useful for cosine and azimuth...
3.1 The purpose of this terminology standard is to help users understand and apply the large number of specialized terms used in connection with the management of lead hazards by providing a single, comprehensive, and consistent terminology. 3.1.1 This terminology standard includes some terms that...
5.1 This test method provides for the following observations, measurements and evaluations of an open state during the test fire. 5.1.1 Ability of the test specimen to resist the passage of flames, radiation, and hot gases caused by sudden direct flame impingement. 5.1.2 Transmission of heat...
Narrow Your Results