loading
IEEE NETWORK MANAGEMENT - THE CURRENT GUIDE TO NETWORK MANAGEMENT (CD-ROM)
IEEE
A description is not available for this item.
ITU-T G.776.4 - Signal processing network equipment
October 1, 2014 - ITU-T

Signal processing network equipment (SPNE) deployed in the network (located in a transmission path from network termination unit to network termination unit) provides functions for voice enhancement and the transport of voice and voiceband services. This...

ASTM D8362-21(2026) - Standard Test Method for Rubber—Determination of the Degree of Silanization by Dynamic Strain Softening
April 1, 2026 - ASTM International

5.1 This test method is based on the Payne Effect. It is a reasonable approach to evaluate the compound's filler-network formation to quantify the degree of silanization in a silica-filled rubber using a rotorless oscillating shear rheometer for the measurement of the strain softening. 5.2...

ARINC 854 - CABIN EQUIPMENT NETWORK BUS
June 19, 2020 - ARINC

This document specifies the implementation of a high-speed Ethernet Local Area Network (LAN) for use in a seat network and which is extensible to additional domains. This specification will address the bus itself (e.g., electrical, signaling), overall LAN architecture, and common...

ASTM E2458-26 - Standard Practices for Bulk Sample Collection and Swab Sample Collection of Visible Powders Suspected of Being Biological Agents and Toxins from Nonporous Surfaces
January 15, 2026 - ASTM International

1.1 These practices cover the collection of visible powders that are suspected biological agents and toxins from solid nonporous surfaces using a bulk collection method, using a dry swab and laminated card, followed by a swab sampling method using a sterile moistened swab. Bulk powder samples are...

CSA C872 - Power consumption of small network equipment (SNE)
January 1, 2014 - CSA

This Standard specifies the test method for measuring and reporting the power consumption of small network equipment. Note: This Standard is technology neutral. The following products are not covered by this Standard: a) network equipment capable of accepting...

ATIS 0600329 - Network Equipment – Earthquake Resistance
February 1, 2014 - ATIS

This standard, when used with established earthquake qualification practices, sets forth test methods, performance requirements, and acceptance criteria for determining the earthquake resistance of telecommunications equipment. Earthquake resistance is the equipment's ability to maintain a...

ASTM F3803-26 - Standard Guide for Applying Goods Movement Process Codes in Common Approaches to Transport Management
January 1, 2026 - ASTM International

5.1 This section elaborates how the GMPC may be used in the context of the two main approaches to managing the execution of transportation mentioned in 4.8. These elaborations do not go into every possible detail of these approaches. The purpose of the elaborations is to provide an outline of the...

ASTM F3427-25 - Standard Practice for Documenting Environmental Conditions for Utilization with Exoskeleton Test Methods
November 1, 2025 - ASTM International

4.1 This section provides a description of the environmental conditions listed in Section 1 and describes the sub-conditions within each condition. Examples provided for many of the conditions and sub-conditions are provided as guidance only. Each of the conditions described should be evaluated and...

ASTM E3095-25 - Standard Guide for Surrogate Materials for Field Evaluation of Nucleic Acid-Based On-Site Biological Assessment Technologies
November 1, 2025 - ASTM International

1.1 This guide describes factors to consider when developing, selecting, and using a surrogate material for evaluating the operational performance of nucleic acid-based on-site biological assessment technologies. Operational performance includes the workflow, technology, operator, controls, and...

ITU-T K.137 - Electromagnetic compatibility requirements and measurement methods for wireline telecommunication network equipment
November 1, 2018 - ITU-T

This Recommendation applies to wireline telecommunication equipment having a rated root mean square (r.m.s.) alternating current (AC) or direct current (DC) supply voltage not exceeding 600 V. This Recommendation specifies the electromagnetic compatibility (EMC) common requirements and test...

CTA-2049 - Determination of Small Network Equipment Average Energy Consumption
February 1, 2015 - CTA

This standard defines procedures for measuring Small Network Equipment (SNE) energy consumption while in an idle state. It defines the interfaces that shall be active and connected for this test procedure, and is written with the intent of addressing current and future devices that...

ITU-T G.161 - Interaction aspects of signal processing network equipment
June 1, 2012 - ITU-T

The evolution towards interactive multimedia applications and implementation of new signal processing devices, both in terminals and communication networks, means that a number of sophisticated signal processing algorithms will be deployed for echo control, noise reduction, level control,...

ITU-T K.43 - Immunity requirements for telecommunication network equipment
July 1, 2009 - ITU-T

This Recommendation specifies the immunity requirements for equipment used within the public telecommunication networks and for terminal equipment connected to such networks. This Recommendation is a product family Recommendation. This Recommendation gives the minimum...

ASTM F3286-17(2024) - Standard Guide for Cybersecurity and Cyberattack Mitigation
November 15, 2024 - ASTM International

5.1 To maintain the integrity of potentially vulnerable information systems while the vessel is at sea or in port, strategies and procedures can be used by every company, organization, and ship. Mitigating potential cyberattack events will allow for a better economic environment through secure...

ITU-T K.88 - EMC requirements for next generation network equipment
November 1, 2011 - ITU-T

This Recommendation specifies the emission and immunity requirements for switching, transmission and media gateway equipment based on Internet protocol (IP) in the next generation network (NGN). It also describes operational conditions for emission and immunity testing. Performance...

J1939/1_202109 - On-Highway Equipment Control and Communication Network
September 21, 2021 - SAE International

SAE J1939-1 specifies the minimum set of SAE J1939 documents that define the Truck and bus control and communications vehicle network as it applies to on-highway equipment. Vehicles covered include all on-highway straight trucks and combination vehicles. A combination vehicle consists...

ITU-T G.798.1 - Types and characteristics of optical transport network equipment
January 1, 2013 - ITU-T

This Recommendation provides an overview of the functions of optical transport network (OTN) equipment and examples of possible OTN equipment types. It does not define required OTN equipment types. The Recommendation is based on the OTN atomic functions specified in...

ASTM E3095-17(2024) - Standard Guide for Surrogate Materials for Field Evaluation of Nucleic Acid-Based On-Site Biological Assessment Technologies
July 1, 2024 - ASTM International

1.1 This guide describes factors to consider when developing, selecting, and using a surrogate material for evaluating the operational performance of nucleic acid-based on-site biological assessment technologies. Operational performance includes the workflow, technology, operator, controls, and...

Advertisement