loading
AWPA P25 - STANDARD FOR INORGANIC BORON (SBX)
January 1, 2020 - AWPA/WOOD
A description is not available for this item.
SEMI P25 - SPECIFICATION FOR MEASURING DEPTH OF FOCUS AND BEST FOCUS
SEMI
A description is not available for this item.
CGA P-25 - Guide for Flat-Bottomed LOX/LIN/LAR Storage Tank Systems
January 1, 2007 - CGA/GAS
A description is not available for this item.
CGA P-2.5 - STANDARD FOR TRANSFILLING OF HIGH PRESSURE GASEOUS OXYGEN USED FOR RESPIRATION
January 1, 2018 - CGA/GAS
A description is not available for this item.
ITU RADIO REGULATIONS ANX - RADIO REGULATIONS ANNEX 1
ITU-R
A description is not available for this item.
ITU RADIO REGULATIONS - RADIO REGULATIONS 4 VOLUME SET * A4 SIZE
ITU-R
A description is not available for this item.
ASTM B37-25 - Standard Specification for Aluminum for Use in Iron and Steel Manufacture
December 15, 2025 - ASTM International

1.1 This specification covers all aluminum-alloy deoxidizing products of all compositions in the form of ingots, bars, rods, cones, nuggets, shot, or stars, for use in the manufacture of iron and steel. Six of the most commonly used deoxidizing product compositions are designated as shown in Table...

ASTM B108/B108M-25 - Standard Specification for Aluminum-Alloy Permanent Mold Castings
December 15, 2025 - ASTM International

1.1 This specification3 covers all registered2 aluminum-alloy permanent mold castings with the most common designated as shown in Table 1. 1.2 This specification is for aluminum-alloy permanent mold castings used in general purpose applications. It may not address the mechanical properties,...

ASTM D1900-25 - Standard Practice for Carbon Black—Sampling Bulk Shipments
December 15, 2025 - ASTM International

3.1 Sampling of bulk shipments of carbon blacks is of utmost importance since the location and number of samples taken by different laboratories can have a significant effect on the agreement of test values obtained. This practice is for use in obtaining representative samples of carbon black in...

ASTM D1921-25 - Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
December 15, 2025 - ASTM International

4.1 A dry mass of plastic material is placed on a series of sieves arranged in order of increasing fineness and the mass is divided into fractions corresponding to the sieve opening. 4.2 These test methods are used to determine particle size distribution and therefore are useful for determining...

ASTM B618/B618M-25 - Standard Specification for Aluminum-Alloy Investment Castings
December 15, 2025 - ASTM International

1.1 This specification covers all registered2 aluminum-alloy investment castings with the most common designated as shown in Table 1. 1.2 This specification is for aluminum-alloy investment castings used in general purpose applications. It may not address the mechanical properties integrity testing...

ASTM B881-25a - Standard Terminology Relating to Aluminum- and Magnesium-Alloy Products
December 15, 2025 - ASTM International

1.1 This terminology covers the principal terms and definitions relating to aluminum- and magnesium-alloy products. It is published to encourage uniformity of terminology throughout Committee B07 product specifications. 1.2 Certain definitions and definitions of terms specific to a standard will...

ASTM C94/C94M-25a - Standard Specification for Ready-Mixed Concrete
December 15, 2025 - ASTM International

1.1 This specification covers ready-mixed concrete as defined in 3.2.2 (Note 1). Requirements for quality of ready-mixed concrete shall be either as stated in this specification or as ordered by the purchaser. When the purchaser's requirements, as stated in the order, differ from those in this...

ASTM C685/C685M-25a - Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing
December 15, 2025 - ASTM International

A1.2 Significance and Use A1.2.1 These tests and requirements are used to evaluate loading and operating procedures; verify the accuracy of proportioning and indicating systems; and determine if mixing uniformity has been degraded by excessive wear or by accumulations of hardened concrete, or both...

ASTM E329-25b - Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
December 15, 2025 - ASTM International

4.1 The inspection and testing of construction activities and the materials used in construction are important elements in obtaining quality construction in general compliance with the contract documents. An agency providing construction inspection, testing, or special inspection, must be selected...

ASTM E907-25 - Standard Test Method for Field Testing Uplift Resistance of Adhered Membrane Roofing Systems
December 15, 2025 - ASTM International

4.1 This field test method is suitable for determining the uplift resistance of the roofing system as stated in applicable specifications, bid documents, or where required by other authorities having jurisdiction. This field test method is also intended to supplement measurement of the uplift...

ASTM D4814-25a - Standard Specification for Automotive Spark-Ignition Engine Fuel
December 15, 2025 - ASTM International

1.1 This specification covers the establishment of requirements of liquid automotive fuels for ground vehicles equipped with spark-ignition engines. 1.2 This specification describes various characteristics of automotive fuels for use over a wide range of operating conditions. It provides for a...

ASTM D4821-25 - Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
December 15, 2025 - ASTM International

4.1 This guide provides insight into the environmental conditions required for the operation of laboratories or to aid in the design of new laboratories that perform carbon black testing activities using those test methods that are under D24's jurisdiction. This guide does not supersede any...

Advertisement