loading
ASTM D5577-26 - Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics
May 15, 2026 - ASTM International

1.1 This guide is intended to provide information on available methods for the separation and classification of contaminants such as moisture, incompatible polymers, metals, adhesives, glass, paper, wood, chemicals, and original-product residues in recycled plastic flakes or pellets....

ASTM D5577-94(2010)e1 - Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics (Withdrawn 2019)
January 1, 2010 - ASTM International

1.1 This guide is intended to provide information on available methods for the separation and classification of contaminants such as moisture, incompatible polymers, metals, adhesives, glass, paper, wood, chemicals, and original-product residues in recycled plastic flakes or pellets....

ASTM D5577-94(2003) - Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics
January 10, 2003 - ASTM International

1.1 This guide is intended to provide information on available methods for the separation and classification of contaminants such as moisture, incompatible polymers, metals, adhesives, glass, paper, wood, chemicals, and original-product residues in recycled plastic flakes or pellets....

ASTM D5577-19 - Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics
April 1, 2019 - ASTM International

1.1 This guide is intended to provide information on available methods for the separation and classification of contaminants such as moisture, incompatible polymers, metals, adhesives, glass, paper, wood, chemicals, and original-product residues in recycled plastic flakes or pellets....

ASTM D4703-24 - Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
December 1, 2024 - ASTM International

1.1 This practice covers the compression molding of thermoplastics (for example, granules, pellets) and milled stock for the preparation of test specimens.2 Note 1: Certain ASTM standards require the use of Procedure C in Annex A1 for compression molding of polyethylene test specimens...

ASTM D5230-26 - Standard Test Method for Carbon Black—Automated Individual Pellet Hardness
June 1, 2026 - ASTM International

4.1 Individual pellet hardness is related to several carbon black characteristics. Among these are mass strength and attrition. The subsequent level of dispersion obtained in some mixed compounds containing the carbon black may be affected by pellet hardness. Acceptable pellet...

ASTM D8643-25 - Standard Test Method for Silica, Pelleted, Granulated - Attrition
November 1, 2025 - ASTM International

4.1 Attrition gives an indication of pellet stability and the amount of fines that may be created by pellet degradation in conveying, handling or transit. 4.2 A similar test method is known for carbon black, see Test Method D1508.

ASTM C1868 - Standard Practice for Ceramographic Preparation of UO2 and Mixed Oxide (U,Pu)O2 Pellets for Microstructural Analysis
January 1, 2018 - ASTM

This practice describes the procedure for preparing nuclear-grade uranium dioxide (UO2) or mixed uraniumplutonium dioxide (MOX or (U,Pu)O2)), sintered and nonirradiated pellets for subsequent microstructural analysis (hereafter referred to as ceramographic examination). The ceramographic...

ASTM C785 - Standard Specification for Nuclear-Grade Aluminum Oxide Pellets
December 1, 2008 - ASTM

This specification applies to pellets of aluminum oxide that may be ultimately used in a reactor core, for example, as filler or spacers within fuel, burnable poison, or control rods. In order to distinguish between the subject pellets and "burnable poison" pellets, it is...

ASTM D5577 - Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics
April 1, 2019 - ASTM

This guide is intended to provide information on available methods for the separation and classification of contaminants such as moisture, incompatible polymers, metals, adhesives, glass, paper, wood, chemicals, and original-product residues in recycled plastic flakes or pellets. Although no...

ASTM D5230-21 - Standard Test Method for Carbon Black—Automated Individual Pellet Hardness
November 1, 2021 - ASTM International

4.1 Individual pellet hardness is related to several carbon black characteristics. Among these are mass strength and attrition. The subsequent level of dispersion obtained in some mixed compounds containing the carbon black may be affected by pellet hardness. Acceptable pellet...

ASTM D5230-21e1 - Standard Test Method for Carbon Black—Automated Individual Pellet Hardness
November 1, 2021 - ASTM International

4.1 Individual pellet hardness is related to several carbon black characteristics. Among these are mass strength and attrition. The subsequent level of dispersion obtained in some mixed compounds containing the carbon black may be affected by pellet hardness. Acceptable pellet...

ASTM D4745-19(2024) - Standard Classification System and Basis for Specification for Filled Polytetrafluoroethlyene (PTFE) Molding and Extrusion Materials Using ASTM Methods
May 1, 2024 - ASTM International

1.1 This standard classification system and basis for specification covers polytetrafluoroethylene (PTFE) filled molding compounds made with virgin PTFE resins defined in Specification D4894, as Types II and III. Note 1: This system can be used as a model for other PTFE compounds having particulate...

ASTM D6290-19 - Standard Test Method for Color Determination of Plastic Pellets
June 1, 2019 - ASTM International

4.1 Before proceeding with this test method, refer to the specification of the material being tested. Any test specimen preparation, conditioning, dimensions, or testing parameters, or a combination thereof, covered in the materials specification shall take precedence over those mentioned in this...

ASTM D6290-18 - Standard Test Method for Color Determination of Plastic Pellets
October 1, 2018 - ASTM International

4.1 Before proceeding with this test method, refer to the specification of the material being tested. Any test specimen preparation, conditioning, dimensions, or testing parameters, or a combination thereof, covered in the materials specification shall take precedence over those mentioned in this...

ASTM D7711 - Standard Guide for Description of Polymer Pellet Defects
September 1, 2011 - ASTM

This guide is a compilation of terms used to describe defects of polymeric pellets. Terms that are generally understood or defined adequately in Terminology D883 or in other readily available sources are not included. Not every term is applicable to every type of pellet. Terms which...

ASTM D7486-22 - Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
November 1, 2022 - ASTM International

5.1 Molding and extruding plastic pellets require dust free, dry pellets to prevent processing problems. Plastic producers try to remove the dust and streamers with dust removal systems prior to packaging and loading. How to accurately measure dust and streamer content in plastic...

ASTM D5230-19 - Standard Test Method for Carbon Black—Automated Individual Pellet Hardness
December 1, 2019 - ASTM International

4.1 Individual pellet hardness is related to several carbon black characteristics. Among these are mass strength and attrition. The subsequent level of dispersion obtained in some mixed compounds containing the carbon black may be affected by pellet hardness. Acceptable pellet...

ASTM C1853-25 - Standard Test Method for The Determination of Carbon (Total) Content in Mixed Oxide ((U, Pu)O 2 ) Sintered Pellets by Direct Combustion-Infrared Detection Method
November 1, 2025 - ASTM International

5.1 MOX pellets are used as a nuclear-reactor fuel. This test method is designed to determine whether the carbon content of the pellets meet the requirements of the fuel specification. Examples of these requirements are given in Specification C833. 5.2 This method is suitable for all...

Advertisement