loading
ASTM A1054-16(2022) - Standard Specification for Sintered Ferrite Permanent Magnets
October 1, 2022 - ASTM International

1.1 This specification covers technically important, commercially available, magnetically hard sintered ferrite permanent magnets. 1.2 Ferrite permanent magnets have residual induction Br from 0.2 T (2000 G) up to about 0.5 T (5000 G) and intrinsic coercive field...

JIS C 2501 - Methods of test for permanent magnet
March 20, 2019 - JSA

The purpose of this Standard is to define the method of measurement of the magnetic flux density, magnetic polarization and the magnetic field strength and also to determine the demagnetization curve and recoil line of permanent magnet materials, the properties of which are presumed...

JIS C 2502 - Materials for permanent magnet
March 20, 2019 - JSA
A description is not available for this item.
ASTM A1070-16(2022) - Standard Specification for Cast and Sintered Alnico Permanent Magnets
July 1, 2022 - ASTM International

1.1 This specification covers technically important, commercially available, magnetically hard, cast and sintered permanent magnets known commonly as Alnico. 1.2 Alnico magnets have approximate magnetic properties of residual magnetic induction, Br, from 0.52 T (5200 G) to 1.35...

MIL-DTL-25547 - LOUDSPEAKER, PERMANENT MAGNET LS-211/AIC-13
April 20, 2018 - NPFC

This specification covers one type of loudspeaker, designated loudspeaker, permanent magnet, LS-211/AIC-13. This loudspeaker is a horn type unit with a frequency response of 200-7,000 Hz, nominal 16 ohms voice coil impedance, and a 20 watt peak power output (see 6.1).

ASTM A1071/A1071M-11(2023) - Standard Test Method for Evaluating Hygrothermal Corrosion Resistance of Permanent Magnet Alloys
December 1, 2023 - ASTM International

1.1 This test method covers the equipment, procedures, and measurement of the resistance of permanent magnet alloys against corrosion in high temperature, high pressure water vapor environments. This test is also known as the Bulk Corrosion Test (BCT). 1.2 The values and equations...

ASTM A1101-23 - Standard Specification for Sintered and Fully Dense Neodymium Iron Boron (NdFeB) Permanent Magnets
December 1, 2023 - ASTM International

1.1 This specification covers technically important, commercially available, magnetically hard sintered and fully dense neodymium iron boron (Nd2Fe14B, NdFeB, or "Neo") permanent magnets. These materials are available in a wide range of compositions with a commensurately large range...

MIL-DTL-24223 - LOUDSPEAKER, PERMANENT MAGNET, SHIPBOARD ANNOUNCING SYSTEMS
January 28, 2014 - NPFC

This specification covers permanent magnet loudspeakers, with enclosure, for use in 70-volt and 95-volt distribution systems on Naval ships as components of shipboard announcing systems.

ASTM A1054-16 - Standard Specification for Sintered Ferrite Permanent Magnets
November 1, 2016 - ASTM International

1.1 This specification covers technically important, commercially available, magnetically hard sintered ferrite permanent magnets. 1.2 Ferrite permanent magnets have residual induction Br from 0.2 T (2000 G) up to about 0.5 T (5000 G) and intrinsic coercive field...

ASTM A1054 - Standard Specification for Sintered Ferrite Permanent Magnets
November 1, 2016 - ASTM

This specification covers technically important, commercially available, magnetically hard sintered ferrite permanent magnets Ferrite permanent magnets have residual induction Br from 0.2 T (2000 G) up to about 0.5 T (5000 G) and intrinsic coercive field strength HcJ...

ASTM A1102-19 - Standard Specification for Sintered Samarium Cobalt (SmCo) Permanent Magnets
August 1, 2019 - ASTM International

This specification applies to technically important, commercially available, magnetically hard sintered (fully dense) permanent magnets commonly known as samarium cobalt (SmCo). SmCo permanent magnets are available in two general composition families abbreviated "SmCo...

MIL-DTL-12632 - LOUDSPEAKERS, PERMANENT MAGNET (ENCASED, 2-WATT, FUNGUS-, GUNBLAST-, AND IMMERSION-RESISTANT), GENERAL SPECIFICATION FOR
May 18, 2020 - NPFC

Scope. This specification covers the general requirements for 2-watt, 4-inch diameter, permanent magnet loudspeakers encased in metal cabinets. These loudspeakers are fungus-, gunblast-, and immersion-resistant.

ASTM A1102 - Standard Specification for Sintered Samarium Cobalt (SmCo) Permanent Magnets
August 1, 2019 - ASTM

This specification covers technically important, commercially available, magnetically hard sintered (fully dense) permanent magnets commonly known as samarium cobalt. These materials are available in two general composition families abbreviated "SmCo 1:5" and "SmCo 2:17." The numbers...

NR/L3/RMVP/0201/CAL402 - Calibration of AC Electromagnets & Permanent Magnets
March 5, 2011 - NR

Work Instruction for the calibration of electromagnets and permanent magnets for materials testing. To be used in the absence of a manufacturers calibration instruction.

ASTM A1102-16 - Standard Specification for Sintered Samarium Cobalt (SmCo) Permanent Magnets
November 1, 2016 - ASTM International

This specification applies to technically important, commercially available, magnetically hard sintered (fully dense) permanent magnets commonly known as samarium cobalt (SmCo). SmCo permanent magnets are available in two general composition families abbreviated 'SmCo...

ASTM A977/A977M-07(2020) - Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
June 1, 2020 - ASTM International

4.1 This test method is suitable for magnet specification, acceptance, service evaluation, quality control in magnet production, research and development, and design. 4.2 When a test specimen is cut or fabricated from a larger magnet, the magnetic properties measured on it are...

MIL-PRF-6106/19 - RELAY, ELECTROMAGNETIC PERMANENT MAGNET DRIVE, 25 AMPERES, SPDT, HERMETICALLY SEALED
March 2, 2020 - NPFC
A description is not available for this item.
ASTM A1070 - Standard Specification for Cast and Sintered Alnico Permanent Magnets
November 1, 2016 - ASTM

This specification covers technically important, commercially available, magnetically hard, cast and sintered permanent magnets known commonly as Alnico. Alnico magnets have approximate magnetic properties of residual magnetic induction, Br, from 0.52 T (5200 G) to 1.35 T...

ASTM A1070-16 - Standard Specification for Cast and Sintered Alnico Permanent Magnets
November 1, 2016 - ASTM International

1.1 This specification covers technically important, commercially available, magnetically hard, cast and sintered permanent magnets known commonly as Alnico. 1.2 Alnico magnets have approximate magnetic properties of residual magnetic induction, Br, from 0.52 T (5200 G) to 1.35...

ASTM A1054-14 - Standard Specification for Sintered Ceramic Ferrite Permanent Magnets
May 15, 2014 - ASTM International

1.1 This specification covers technically important, commercially available, magnetically hard sintered ceramic ferrite permanent magnets. 1.2 Ceramic ferrite magnets have residual magnetic induction Br from 2000 G (0.2 T) up to about 5000 G (0.5 T) and intrinsic coercive field...

Advertisement