This specification establishes requirements for an alloy having a composition of copper, tin, lead, and zinc which is used for component castings of valves, flanges, and fittings. The specimen shall have the chemical composition of major elements: copper, tin, lead zinc, nickel including cobalt. It...
This specification covers the acceptance criteria and geometric require menu for gas metal arc spot, plug and slut welds, encountered in automotive a welding for which GM is responsible for establishing or approving product design The application of the requirement of this...
PURPOSE This John C. Stennis Space Center (SSC) standard (SSTD) provides for a qualified American Society of Mechanical Engineers (ASME) weld procedure for Gas Tungsten Arc Welding (GTAW) of Aluminum (P-No. 23) pipe or plate.
PURPOSE This John C. Stennis Space Center (SSC) standard (SSTD) outlines the qualified Gas Tungsten Arc Welding (GTAW) procedure for use in welding Monel Alloy to Stainless Steel at SSC. APPLICABILITY This SSTD applies to all contractor and subcontractor personnel involved with the...
This standard specifies the requirements for quarter turn metal plug valves, including the lift plug type, for the petroleum, petrochemical, and industrial applications. This standard is applicable to: - steel, nickel base, and other alloy plug valves with flanged or...
1.1 This specification covers iron-nickel-chromium
This specification covers requirements for copper alloy sand castings for general applications. The components part casting may be manufactured in advance and supplied from stock. The castings shall conform to the compositional requirements for named elements specified. Mechanical properties of...
This specification establishes requirements for continuously cast rod, bar, tube, and shapes produced from copper alloys with nominal compositions. Castings produced to this specification may be manufactured for and supplied from stock. Mechanical tests are required only when specified by the...
This specification covers requirements for copper alloy sand castings for general applications. The components part casting may be manufactured in advance and supplied from stock. The castings shall conform to the compositional requirements for named elements specified. Mechanical properties of...
This specification establishes requirements for a high-grade steam-metal or valve-bronze alloy (Copper Alloy UNS C92200) used for component castings of valves, flanges, and fittings. Tensile strength, yield strength, and elongation shall be determined from separately cast test bars and shall meet...
This specification establishes requirements for bronze castings for steam locomotive wearing parts. The following Copper Alloy UNS Nos. are specified: C93200, C93400, C93600, C93700, C93800, C94300, C94400, and C94500. The product shall be manufactured by such casting methods to produce a uniform...
This specification establishes requirements for continuously cast rod, bar, tube, and shapes produced from copper alloys with nominal compositions. Castings produced to this specification may be manufactured for and supplied from stock. Mechanical tests are required only when specified by the...
1.1 This test method covers the design and use of a thin metallic calorimeter for measuring heat transfer rate (also called heat flux). Thermocouples are attached to the unexposed surface of the calorimeter. A one-dimensional heat flow analysis is used for calculating the heat transfer rate from...
1.1 This specification covers iron-nickel-chromium
These Rules are applicable to the moulding, casting, testing and to the method of repairing new propellers, propeller blades and propeller bosses made of cast copper alloys. By agreement with GL, these Rules may also be applied to the repair and testing of propellers which have been damaged in...
1. The Rules for Materials apply to materials and products which are intended for the construction, repair and equipping of ships, offshore installations and other structures which are classified by Germanischer Lloyd (GL) or whose classification has been applied for. 2. The scope of these Rules...
Narrow Your Results