1.1 This practice covers the standard raw materials, formulation, and mixing procedure for the evaluation and quality control of silica and related technologies, such as silanes and functionalized polymers, in a standardized rubber compound. 1.2 Units-The values stated in SI units are...
1.1 This practice covers procedures for determining the gel times of polyurethane non-foam formulations using commercially available gel test equipment. 1.2 Definitions, terms, and techniques are described along with procedures for calculating sample weights. 1.3 The values stated in SI units are...
This specification covers plate consisting of a base metal to which is bonded, integrally and continuously, on one or both sides a layer of one of the following: titanium, zirconium, tantalum, niobium, and their alloys. The material generally is intended for pressure vessel use. The cladding...
1.1 This test method describes a procedure for comparing the behavior of refractories to the action of molten slag in a rotating test furnace. A reference material should be included in each test and run for comparison. No numeric results are obtained from this test method. Numeric...
3.1 These test methods can be used to ensure that the chemical composition of the glass sand meets the compositional specification required for this raw material. 3.2 These test methods do not preclude the use of other methods that yield results within permissible variations. In any...
5.1 Cotton fiber that is on average finer and more mature is more desirable than coarse or immature fiber, although distinction between these qualities cannot be made quickly and accurately using current test methods. Immature fibers break more easily during processing and have a tendency to form...
1.1 This test method covers the use of a rotorless oscillating shear rheometer for the measurement of the flow properties of raw rubber and unvulcanized rubber compounds. These flow properties are related to factory processing. 1.2 The values stated in SI units are to be regarded as standard...
3.1 Commercially available computer material management programs are being used regularly in the rubber industry. These programs typically will retrieve information from a raw material or compounding material data base by chemical name, CAS registry number, trade name,...
1.1 This specification covers masonry mortars whose materials and design requirements are governed by Specification C270 but are preblended dry in a factory instead of produced from individual raw materials delivered to the job-site. 1.2 The field-sampling, testing, directly...
1.1 This specification covers chemical, physical and mechanical requirements for quenched and tempered bolts manufactured from steel and alloy steel, in inch and metric dimensions, in two strength grades, two types and two styles. 1.1.1 This specification was originally issued as a consolidation...
1.1 This practice covers procedures commonly used in the paint industry to formulate paints and coating materials. It describes procedures for calculating formulation values for weight solids, volume solids, solvent content, volatile organic compound (VOC) content, hazardous air pollutant...
1.1 These test methods cover procedures for sampling and testing coal ash and raw or calcined pozzolans for use in concrete. 1.2 The procedures appear in the following order: Sections Sampling 7 CHEMICAL ANALYSIS Reagents and apparatus 10 Moisture content 11 and 12 Loss on ignition 13 and 14...
Narrow Your Results