loading
ASHRAE REFRIGERATION I-P - 2018 ASHRAE Handbook Refrigeration
January 1, 2018 - ASHRAE
A description is not available for this item.
ASHRAE REFRIGERATION SI - 2018 ASHRAE Handbook Refrigeration
January 1, 2018 - ASHRAE
A description is not available for this item.
ASHRAE REFRIGERATION CD - ASHRAE HANDBOOK - REFRIGERATION (I-P & SI EDITION)
ASHRAE
A description is not available for this item.
ASTM E1564-00(2025) - Standard Guide for Design and Maintenance of Low-Temperature Storage Facilities for Maintaining Cryopreserved Biological Materials
May 1, 2025 - ASTM International

1.1 This guide covers recommended procedures for developing and maintaining low-temperature storage facilities for freezers with mechanical refrigeration. 1.2 This guide covers recommended procedures for developing and maintaining low-temperature storage facilities for freezers cooled with...

ASTM B68/B68M-25 - Standard Specification for Seamless Copper Tube, Bright Annealed
April 1, 2025 - ASTM International

This specification covers bright annealed seamless copper tube suitable for use in refrigeration,oil lines, gasoline lines, and so forth, where tube with an interior surface essentially free from scale and dirt is required. The material of manufacture shall be billets, cast bars, or tube of...

ASTM D6282/D6282M-25 - Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations
March 1, 2025 - ASTM International

5.1 Direct Push Soil Sampling is used extensively in environmental site characterization of soils below ground surface and can also be used for subsurface geotechnical site characterization (3, 7-13). Limited early studies have been done using Direct Push Soil Sampling for environmental...

ASTM E449-24 - Standard Test Methods for Analysis of Calcium Chloride
October 1, 2024 - ASTM International

3.1 Calcium chloride is available in various forms and purities. A major use is the de-icing and dust control of roads. It is also used in the coal industry for dustproofing and freezeproofing, in foods, in electrolytic cells, and in refrigeration brines. The test methods listed in 1.2...

ASTM F3506-24 - Standard Specification for Polyethylene of Raised Temperature/Aluminum/Polyethylene of Raised Temperature (PE-RT/AL/PE-RT) Composite Pressure Pipe based on Inner Diameter (ID) for use in Air Conditioning and Refrigeration Line Set Systems
September 1, 2024 - ASTM International

1.1 This specification covers a coextruded polyethylene composite pressure pipe with a butt welded aluminum tube reinforcement between the inner and outer layers. The inner and outer polyethylene layers are bonded to the aluminum tube by a melt adhesive. Included is a system of nomenclature for the...

ASTM F2795-18(2024) - Standard Test Method for Performance of Self-Contained Soft Serve and Shake Freezers
September 1, 2024 - ASTM International

1.1 This test method evaluates the energy consumption and performance of soft serve ice cream and shake freezers. The food service operator can use this test to evaluate and select an appropriate soft serve or shake freezer and understand its energy consumption and production capabilities. 1.2 This...

ASTM B1029-24 - Standard Practice for Making Press-Connect Joints with Seamless Copper and Copper Alloy Tube and Press Fittings
July 1, 2024 - ASTM International

1.1 This practice covers a procedure for making permanent press-connect joints by compressing an elastomeric sealing element between seamless copper and copper alloy tube and fittings. 1.2 This procedure applies to press-connect fittings of pressurized systems such as plumbing, facility water,...

ASTM E1066/E1066M-19(2024) - Standard Practice for Ammonia Colorimetric Leak Testing
June 1, 2024 - ASTM International

1.1 This practice covers the testing of large single- and double-walled tanks, pressure and vacuum vessels, laminated, lined- or double-walled parts, complex piping systems, flexible containers (such as aircraft fuel tanks), glass-to-metal seals in hybrid packages, and systems that inherently...

ASTM C1710-24 - Standard Guide for Installation of Flexible Closed Cell Preformed Insulation in Tube and Sheet Form
March 1, 2024 - ASTM International

5.1 This guide applies to flexible closed cell insulation tubing and sheet materials manufactured according to Specifications C534 and C1427. This standard is intended to provide a basic guide for installing these types of materials. 5.2 Confirm application use temperature is consistent with...

ASTM B280-23 - Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
October 1, 2023 - ASTM International

1.1 This specification covers the requirements for seamless copper tube intended for use in the connection, repairs, or alternations of air conditioning or refrigeration units in the field. Note 1: Fittings used for soldered or brazed connections in air conditioning and refrigeration...

ASTM C1774-24 - Standard Guide for Thermal Performance Testing of Cryogenic Insulation Systems
March 15, 2024 - ASTM International

5.1 A key aspect in understanding the thermal performance of cryogenic insulation systems is to perform tests under representative and reproducible conditions, simulating the way that the materials are actually put together and used in service. Therefore, a large temperature differential across the...

ASTM F3346-24 - Standard Specification for Polyethylene of Raised Temperature/Aluminum/Polyethylene of Raised Temperature (PE-RT/AL/PE-RT) Composite Pressure Pipe
February 1, 2024 - ASTM International

1.1 This specification covers a coextruded polyethylene composite pressure pipe with a butt welded aluminum tube reinforcement between the inner and outer layers. The inner and outer polyethylene layers are bonded to the aluminum tube by a melt adhesive. Included is a system of nomenclature for the...

ASTM B828-23 - Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings
December 1, 2023 - ASTM International

1.1 This practice covers a procedure for making capillary joints by soldering of copper and copper alloy tube and fittings. 1.2 This procedure is applicable to pressurized systems such as plumbing, heating, air conditioning, refrigeration, mechanical, fire sprinkler, and other similar...

ASTM B491/B491M-23 - Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications
November 1, 2023 - ASTM International

This specification covers aluminum and aluminum-alloy extruded round tubes either in coils or straight lengths, for general purpose applications such as refrigeration service, gas lines, oil lines, and instrument lines, in the alloys and tempers. Chemical composition: silicon, iron, copper,...

ULC 541 - Haut-parleurs pour réseaux avertisseurs d
May 26, 2023 - ULSE

1.1 These requirements cover self-contained, refrigerated vending machines intended for connection to alternating-current circuits rated 600 volts or less in accordance with ANSI/NFPA 70. Vending machines covered by these requirements: a) Incorporate refrigeration systems of the air-cooled...

ASTM B743-23 - Standard Specification for Seamless Copper Tube in Coils
April 1, 2023 - ASTM International

1.1 This specification establishes the requirements for seamless copper tube in coils, suitable for use in refrigeration and air conditioning or other uses, such as oil lines and gasoline lines. 1.2 Units-The values stated in inch-pound units are to be regarded as standard. The values given...

ASTM E520-08(2023) - Standard Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectrometry
April 1, 2023 - ASTM International

This practice describes the photomultiplier properties that are essential to their judicious selection and use of in emission and absorption spectrometry. The properties covered here include structural features, electrical properties, and characteristics involved in precautions and problems. The...

Advertisement